Change GOB sizes from free-functions to constexpr constants.
Add SwizzleSliceToVoxel, a function that swizzles a 2D array of pixels
into a 3D texture and use it for 3D copies.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
This fixes some cases where entries could have been removed multiple
times reading freed memory. To address this issue this commit removes
duplicates from entries marked for removal and sorts out the removal
process to fix another use-after-free situation.
Another issue fixed in this commit is orphan invalidation cache entries.
Previously only the entries that were invalidated in the current
operations had its entries removed. This led to more use-after-free
situations when these entries were actually invalidated but referenced
an object that didn't exist.
Like MirrorOnceBorder, this requires the GL_EXT_texture_mirror_clamp extension. This extension is unfortunately not available on Intel's drivers (both Windows proprietary and Linux Mesa). Use GL_MIRROR_CLAMP_TO_EDGE as a fallback if the extension is unavailable.
Macro code is just uploaded sequentially from a starting address, however that does not mean the entry point for the macro is at that address. This PR adds preliminary support for executing macros in the middle of our cached code.
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and
Suspended State, Recreates the bootmanager, Initializes Multicore
system.
This moves dynamic state present in VK_EXT_extended_dynamic_state to a
separate structure in FixedPipelineState. This is structure is at the
bottom allowing us to hash and memcmp only when the extension is not
supported.
Avoid illegal copies. This intercepts the last step of a copy to avoid
generating validation errors or corrupting the driver on some instances.
We can create views and emit copies accordingly in future commits and
remove this last-step validation.
Add a flat table to test if it's legal to create a texture view between
two formats or copy betweem them.
This table is based on ARB_copy_image and ARB_texture_view. Copies are
more permissive than views.
After marking buffers as resident, Nvidia's driver seems to take a
slow path. To workaround this issue, copy to a STREAM_READ buffer and
then call GetNamedBufferSubData on it.
This is a temporary solution until we have asynchronous flushing.
Making the stream buffer resident increases GPU usage significantly on
some games. This seems to be addressed invalidating the stream buffer
with InvalidateBufferData instead of using a Unmap + Map (with
invalidation flags).
Switch games are allowed to bind less data than what they use in a
vertex buffer, the expected behavior here is that these values are read
as zero. At the moment of writing this only D3D12, OpenGL and NVN through
NV_vertex_buffer_unified_memory support vertex buffer with a size limit.
In theory this could be emulated on Vulkan creating a new VkBuffer for
each (handle, offset, length) tuple and binding the expected data to it.
This is likely going to be slow and memory expensive when used on the
vertex buffer and we have to do it on all draws because we can't know
without analyzing indices when a game is going to read vertex data out
of bounds.
This is not a problem on OpenGL's BufferAddressRangeNV because it takes
a length parameter, unlike Vulkan's CmdBindVertexBuffers that only takes
buffers and offsets (the length is implicit in VkBuffer). It isn't a
problem on D3D12 either, because D3D12_VERTEX_BUFFER_VIEW on
IASetVertexBuffers takes SizeInBytes as a parameter (although I am not
familiar with robustness on D3D12).
Currently this only implements buffer ranges for vertex buffers,
although indices can also be affected. A KHR_robustness profile is not
created, but Nvidia's driver reads out of bound vertex data as zero
anyway, this might have to be changed in the future.
- Fixes SMO random triangles when capturing an enemy, getting hit, or
looking at the environment on certain maps.
Make stream buffer and cached buffers as resident and query their
address. This allows us to use GPU addresses for several proprietary
Nvidia extensions.
Expose NV_vertex_buffer_unified_memory when the driver supports it.
This commit adds a function the determine if a GL_RENDERER is a Turing
GPU. This is required because on Turing GPUs Nvidia's driver crashes
when the buffer is marked as resident or on DeleteBuffers. Without a
synchronous debug output (single threaded driver), it's likely that
the driver will crash in the first blocking call.
Add HSET2_IMM. Due to the complexity of the encoding avoid using
BitField unions and read the relevant bits from the code itself.
This is less error prone.
Update validation layer string to VK_LAYER_KHRONOS_validation.
While we are at it, properly check for available validation layers
before enabling them.
Enable GL_EXT_texture_shadow_lod if available. If this extension is not available, such as on Intel/AMD proprietary drivers, use textureGrad as a workaround.
Variables that are marked as const cannot have the move constructor
invoked when returning from a function (the move constructor requires a
non-const variable so it can "steal" the resources from it.
Check() can throw an exception if the Vulkan result isn't successful.
We remove the check so that std::terminate isn't outright called and
allows for better debugging (should it ever actually fail).
Renames some variables to prevent ones in inner scopes from shadowing
outer-scoped variables.
The Copy* functions have no shadowing, but we rename them anyways to
remain consistent with the other functions.
We can reduce the capture scope so that it's not possible for both "reg"
variables to clash with one another.
While we're at it, we can prevent unnecessary copies while we're at it.
There's no need to load contents from the CPU when a clear resets all
the contents of the underlying memory. This is already implemented on
OpenGL and the texture cache.
maxwell_to_vk: Reorder filtering modes to start with None, then Nearest, then Linear.
maxwell_to_vk: Logs filter modes under UNREACHABLE_MSG instead of UNIMPLEMENTED_MSG, since any unknown filter modes are invalid and not unimplemented.
maxwell_to_vk: Return VK_SAMPLER_MIPMAP_MODE_NEAREST instead of VK_SAMPLER_MIPMAP_MODE_LINEAR when mipmap_filter is None with the description from the VkSamplerCreateInfo(3) man page.
maxwell_to_gl: Log unimplemented features under UNIMPLEMENTED_MSG instead of LOG_ERROR to bring into parity with maxwell_to_vk
maxwell_to_gl: Deduplicate logging in VertexType(), merging them into one.
maxwell_to_gl: Return GL_NEAREST instead of GL_LINEAR if an unknown texture filter mode is encountered.
maxwell_to_gl: Log the mipmap filter mode if an unknown value is passed in.
maxwell_to_gl: Reorder filtering modes to start with None, then Nearest, then Linear.
Due to the limitation of GL_MAX_IMAGE_UNITS being low (8) on Intel's and Nvidia's proprietary drivers, we have to reserve an appropriate amount of image bindings for each of the stages. So far games have been observed to use 4 image bindings on the fragment stage (Kirby Star Allies) and 1 on the vertex stage (TWD series).
No games thus far in my limited testing used more than 4 images concurrently and across all currently active programs.
This fixes shader compilation errors on Kirby Star Allies on OpenGL (GLSL/GLASM)
All registers are now callee-save registers.
RBX and RBP selected for STATE and RESULT because these are most commonly accessed; this is to avoid the REX prefix.
RBP not used for STATE because there are some SIB restrictions, RBX emits smaller code.
Emit code compatible with NV_gpu_program5.
This should emit code compatible with Fermi, but it wasn't tested on
that architecture. Pascal has some issues not present on Turing GPUs.
Instead of using as template argument a shared pointer, use the
underlying type and manage shared pointers explicitly. This can make
removing shared pointers from the cache more easy.
While we are at it, make some misc style changes and general
improvements (like insert_or_assign instead of operator[] + operator=).
Vertex buffers bindings become invalid after the stream buffer is
invalidated. We were originally doing this, but it got lost at some
point.
- Fixes Animal Crossing: New Horizons, but it affects everything.
This allows rendering to 3D textures with more than one slice.
Applications are allowed to render to more than one slice of a texture
using gl_Layer from a VTG shader.
This also requires reworking how 3D texture collisions are handled, for
now, this commit allows rendering to slices but not to miplevels. When a
render target attempts to write to a mipmap, we fallback to the previous
implementation (copying or flushing as needed).
- Fixes color correction 3D textures on UE4 games (rainbow effects).
- Allows Xenoblade games to render to 3D textures directly.
Implement a generic shader cache for fast lookups and invalidations.
Invalidations are cheap but expensive when a shader is invalidated.
Use two mutexes instead of one to avoid locking invalidations for
lookups and vice versa. When a shader has to be removed, lookups are
locked as expected.
Skip fast buffer uploads on Nvidia 443.24 Vulkan beta driver on OpenGL.
This driver throws the following error when calling BufferSubData or
BufferData on buffers that are candidates for fast constant buffer
uploads. This is the equivalens to push constants on Vulkan, except that
they can access the full buffer. The error:
Unknown internal debug message. The NVIDIA OpenGL driver has encountered
an out of memory error. This application might
behave inconsistently and fail.
If this error persists on future drivers, we might have to look deeper
into this issue. For now, we can black list it and log it as a temporary
solution.
Games using D3D idioms can join images and samplers when a shader
executes, instead of baking them into a combined sampler image. This is
also possible on Vulkan.
One approach to this solution would be to use separate samplers on
Vulkan and leave this unimplemented on OpenGL, but we can't do this
because there's no consistent way of determining which constant buffer
holds a sampler and which one an image. We could in theory find the
first bit and if it's in the TIC area, it's an image; but this falls
apart when an image or sampler handle use an index of zero.
The used approach is to track for a LOP.OR operation (this is done at an
IR level, not at an ISA level), track again the constant buffers used as
source and store this pair. Then, outside of shader execution, join
the sample and image pair with a bitwise or operation.
This approach won't work on games that truly use separate samplers in a
meaningful way. For example, pooling textures in a 2D array and
determining at runtime what sampler to use.
This invalidates OpenGL's disk shader cache :)
- Used mostly by D3D ports to Switch
NV_transform_feedback, NV_transform_feedback2 and
ARB_transform_feedback3 with NV_transform_feedback interactions allows
implementing transform feedbacks as dynamic state.
Maxwell implements transform feedbacks as dynamic state, so using these
extensions with TransformFeedbackStreamAttribsNV allows us to properly
emulate transform feedbacks without having to recompile shaders when the
state changes.
On Intel's proprietary drivers, gl_Layer and gl_ViewportIndex are not allowed members of gl_PerVertex block, causing the shader to fail to compile. Fix this by declaring these variables outside of gl_PerVertex.
This avoids using Nvidia's ASTC decoder on OpenGL.
The last time it was profiled, it was slower than yuzu's decoder.
While we are at it, fix a bug in the texture cache when native ASTC is
not supported.
Previously we were disabling compute shaders on Intel's proprietary driver due to broken compute. This has been fixed in the latest Intel drivers. Re-enable compute for Intel proprietary drivers and remove the check for broken compute.
Geometry shaders built from Nvidia's compiler check for bits[16:23] to
be less than or equal to 0 with VSETP to default to a "safe" value of
0x8000'0000 (safe from hardware's perspective). To avoid hitting this
path in the shader, return 0x00ff'0000 from S2R INVOCATION_INFO.
This seems to be the maximum number of vertices a geometry shader can
emit in a primitive.
Implement more surface reconstruct cases. Allow overlaps with more than
one layer and mipmap and copies all of them to the new texture.
- Fixes textures moving around objects on Xenoblade games
Avoid copying to a staging buffer on non-granular memory addresses.
Add a callable argument to StreamBufferUpload to be able to copy to the
staging buffer directly from ReadBlockUnsafe.
Stop ignoring image swizzles on depth and stencil images.
This doesn't fix a known issue on Xenoblade Chronicles 2 where an OpenGL
texture changes swizzles twice before being used. A proper fix would be
having a small texture view cache for this like we do on Vulkan.
While Vulkan was assuming we had no negative viewports, OpenGL code
was assuming we had them. Port the old code from Vulkan to OpenGL,
checking if the first viewport is negative before flipping faces.
This is not a complete implementation since we only check for the first
viewport to be negative. That said, unless a game is using Vulkan,
OpenGL and NVN games should be fine here, and we can always compare with
our Vulkan backend to see if there's a difference.
The check to flip faces when viewports are negative were a left over
from the old OpenGL code. This is not required on Vulkan where we have
negative viewports.
Hardware S2R special registers match gl_Thread*MaskNV. We can trivially
implement these using Nvidia's extension on OpenGL or naively stubbing
them with the ARB instructions to match. This might cause issues if the
host device warp size doesn't match Nvidia's. That said, this is
unlikely on proper shaders.
Refer to the attached url for more documentation about these flags.
https://www.khronos.org/registry/OpenGL/extensions/NV/NV_shader_thread_group.txt
Some operations like atomicMin were ignored because they returned were
being stored to RZ. This operations have a side effect and it was being
ignored.
Drop the std::list hack to allocate memory indefinitely.
Instead use a custom allocator that keeps references valid until
destruction. This allocates fixed chunks of memory and puts pointers in
a free list. When an allocation is no longer used put it back to the
free list, this doesn't heap allocate because std::vector doesn't change
the capacity. If the free list is empty, allocate a new chunk.
Most overlaps in the buffer cache only contain one mapped address.
We can avoid close to all heap allocations once the buffer cache is
warmed up by using a small_vector with a stack size of one.
Instead of using boost::icl::interval_map for caching, use
boost::intrusive::set. interval_map is intended as a container where the
keys can overlap with one another; we don't need this for caching
buffers and a std::set-like data structure that allows us to search with
lower_bound is enough.
Add code required to use OpenGL assembly programs based on
NV_gpu_program5. Decompilation for ARB programs is intended to be added
in a follow up commit. This does **not** include ARB decompilation and
it's not in an usable state.
The intention behind assembly programs is to reduce shader stutter
significantly on drivers supporting NV_gpu_program5 (and other required
extensions). Currently only Nvidia's proprietary driver supports these
extensions.
Add a UI option hidden for now to avoid people enabling this option
accidentally.
This code path has some limitations that OpenGL compatibility doesn't
have:
- NV_shader_storage_buffer_object is limited to 16 entries for a single
OpenGL context state (I don't know if this is an intended limitation, an
specification issue or I am missing something). Currently causes issues
on The Legend of Zelda: Link's Awakening.
- NV_parameter_buffer_object can't bind buffers using an offset
different to zero. The used workaround is to copy to a temporary buffer
(this doesn't happen often so it's not an issue).
On the other hand, it has the following advantages:
- Shaders build a lot faster.
- We have control over how floating point rounding is done over
individual instructions (SPIR-V on Vulkan can't do this).
- Operations on shared memory can be unsigned and signed.
- Transform feedbacks are dynamic state (not yet implemented).
- Parameter buffers (uniform buffers) are per stage, matching NVN and
hardware's behavior.
- The API to bind and create assembly programs makes sense, unlike
ARB_separate_shader_objects.
Constant attributes (in OpenGL known disabled attributes) are not
supported on Vulkan, even with extensions. To emulate this behavior we
return zero on reads from disabled vertex attributes in shader code.
This has no caching cost because attribute formats are not dynamic state
on Vulkan and we have to store it in the pipeline cache anyway.
- Fixes Animal Crossing: New Horizons terrain borders
This was a left over from OpenGL when disabled buffers where not properly
emulated. We no longer have to assert this as it is checked in vertex
buffer initialization.
"Not equal" operators on GLSL seem to behave as unordered when we expect
an ordered comparison.
Manually emulate this checking for LGE values (numbers, not-NaNs).
This should fix grass interactions on Breath of the Wild on Vulkan.
It is currently untested against validation layers.
Nvidia's Windows 443.09 beta driver or Linux 440.66.12 is required for
now.
In file included from src/video_core/renderer_opengl/renderer_opengl.cpp:25:
In file included from src/./video_core/renderer_opengl/gl_rasterizer.h:26:
In file included from src/./video_core/renderer_opengl/gl_fence_manager.h:11:
src/./video_core/fence_manager.h:91:32: error: use 'template' keyword
to treat 'Write' as a dependent template name
memory_manager.Write<u32>(current_fence->GetAddress(), current_fence->GetPayload());
^
template
src/./video_core/fence_manager.h:137:32: error: use 'template'
keyword to treat 'Write' as a dependent template name
memory_manager.Write<u32>(current_fence->GetAddress(), current_fence->GetPayload());
^
template
