setup-ipsec-vpn/docs/clients.md

Configure IPsec/L2TP VPN Clients

Read this in other languages: English, 简体中文.

To connect using IPsec/XAuth mode, see: Configure IPsec/XAuth VPN Clients

After setting up your own VPN server, follow these steps to configure your devices. IPsec/L2TP is natively supported by Android, iOS, OS X, and Windows. There is no additional software to install. Setup should only take a few minutes. In case you are unable to connect, first check to make sure the VPN credentials were entered correctly.

---

• Platforms
  • Windows
  • OS X
  • Android
  • iOS
  • Chromebook

Windows

Windows 10 and 8.x:

1. Right-click on the wireless/network icon in your system tray.
2. Select Open Network and Sharing Center.
3. Click Set up a new connection or network.
4. Select Connect to a workplace and click Next.
5. Click Use my Internet connection (VPN).
6. Enter Your VPN Server IP in the Internet address field.
7. Enter anything you like in the Destination name field, and then click Create.
8. Right-click on the wireless/network icon in your system tray, select Open Network and Sharing Center.
9. On the left, click Change adapter settings. Right-click on the new VPN entry and choose Properties.
10. Click the Security tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the Type of VPN.
11. Click Allow these protocols. Select "Challenge Handshake Authentication Protocol (CHAP)" and deselect all others.
12. Click the Advanced settings button.
13. Select Use preshared key for authentication and enter Your VPN IPsec PSK for the Key.
14. Click OK to close the Advanced settings.
15. Click OK to save the VPN connection details.

Note: A one-time registry change is required before connecting. See notes below.

Windows 7, Vista and XP:

1. Click on the Start Menu and go to the Control Panel.
2. Go to the Network and Internet section.
3. Click Network and Sharing Center.
4. Click Set up a new connection or network.
5. Select Connect to a workplace and click Next.
6. Click Use my Internet connection (VPN).
7. Enter Your VPN Server IP in the Internet address field.
8. Enter anything you like in the Destination name field.
9. Check the Don't connect now; just set it up so I can connect later checkbox.
10. Click Next.
11. Enter Your VPN Username in the User name field.
12. Enter Your VPN Password in the Password field.
13. Check the Remember this password checkbox.
14. Click Create, and then Close.
15. Repeat steps 1-3 above to open Network and Sharing Center.
16. On the left, click Change adapter settings. Right-click on the new VPN entry and choose Properties.
17. Click the Options tab and uncheck Include Windows logon domain.
18. Click the Security tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the Type of VPN.
19. Click Allow these protocols. Select "Challenge Handshake Authentication Protocol (CHAP)" and deselect all others.
20. Click the Advanced settings button.
21. Select Use preshared key for authentication and enter Your VPN IPsec PSK for the Key.
22. Click OK to close the Advanced settings.
23. Click OK to save the VPN connection details.

To connect to the VPN: Click on the wireless/network icon in your system tray, select the new VPN entry, and click Connect. If prompted, enter Your VPN Username and Password, then click OK. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

Note: A one-time registry change is required if the VPN server and/or client is behind NAT (e.g. home router). Please refer to the linked page, or run the following from an elevated command prompt. You must reboot your computer when done.

• For Windows Vista, 7, 8 and 10

  REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
  

• For Windows XP only

  REG ADD HKLM\SYSTEM\CurrentControlSet\Services\IPSec /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
  

OS X

1. Open System Preferences and go to the Network section.
2. Click the + button in the lower-left corner of the window.
3. Select VPN from the Interface drop-down menu.
4. Select L2TP over IPSec from the VPN Type drop-down menu.
5. Enter anything you like for the Service Name.
6. Click Create.
7. Enter Your VPN Server IP for the Server Address.
8. Enter Your VPN Username for the Account Name.
9. Click the Authentication Settings button.
10. In the User Authentication section, select the Password radio button and enter Your VPN Password.
11. In the Machine Authentication section, select the Shared Secret radio button and enter Your VPN IPsec PSK.
12. Click OK.
13. Check the Show VPN status in menu bar checkbox.
14. Click the Advanced button and make sure the Send all traffic over VPN connection checkbox is selected.
15. Click the TCP/IP tab, and make sure Link-local only is selected in the Configure IPv6 section.
16. Click OK to close the Advanced settings, and then click Apply to save the VPN connection information.

You can connect to the VPN using the VPN icon in the menu bar, or by selecting the VPN in the Network section of System Preferences and choosing Connect. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

Android

1. Launch the Settings application.
2. Tap More... in the Wireless & Networks section.
3. Tap VPN.
4. Tap Add VPN Profile or the + icon at top-right of screen.
5. Enter anything you like in the Name field.
6. Select L2TP/IPSec PSK in the Type drop-down menu.
7. Enter Your VPN Server IP in the Server address field.
8. Enter Your VPN IPsec PSK in the IPSec pre-shared key field.
9. Tap Save.
10. Tap the new VPN connection.
11. Enter Your VPN Username in the Username field.
12. Enter Your VPN Password in the Password field.
13. Check the Save account information checkbox.
14. Tap Connect.

Note: Android 6 (Marshmallow) users should edit /etc/ipsec.conf on the VPN server and append ,aes256-sha2_256 to both ike= and phase2alg= lines. Then add a new line sha2-truncbug=yes immediately after those. Indent lines with two spaces. When finished, run service ipsec restart. (Reference)

Once connected, you will see a VPN icon in the notification bar. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

iOS

1. Go to Settings -> General -> VPN.
2. Tap Add VPN Configuration....
3. Tap Type. Select L2TP and go back.
4. Tap Description and enter anything you like.
5. Tap Server and enter Your VPN Server IP.
6. Tap Account and enter Your VPN Username.
7. Tap Password and enter Your VPN Password.
8. Tap Secret and enter Your VPN IPsec PSK.
9. Make sure the Send All Traffic switch is ON.
10. Tap Done.
11. Slide the VPN switch ON.

Once connected, you will see a VPN icon in the status bar. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

Chromebook

1. If you haven't already, sign in to your Chromebook.
2. Click the status area, where your account picture appears.
3. Click Settings.
4. In the Internet connection section, click Add connection.
5. Click Add OpenVPN / L2TP.
6. Enter Your VPN Server IP for the Server hostname.
7. Enter anything you like for the Service name.
8. Make sure Provider type is L2TP/IPSec + pre-shared key.
9. Enter Your VPN IPsec PSK for the Pre-shared key.
10. Enter Your VPN Username for the Username.
11. Enter Your VPN Password for the Password.
12. Click Connect.

Once connected, you will see a VPN icon overlay on the network status icon. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

Credits

This document was adapted from the Streisand project by Joshua Lund and contributors.

License

Copyright (C) 2016 Lin Song
Based on the work of Joshua Lund (Copyright 2014-2016)

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.