mirror of synced 2024-11-25 06:16:07 +03:00

2021-05-03 00:06:33 -05:00

24 KiB

Raw Blame History

IPsec VPN Server Auto Setup Scripts

Set up your own IPsec VPN server in just a few minutes, with IPsec/L2TP, Cisco IPsec and IKEv2 on Ubuntu, Debian and CentOS. All you need to do is provide your own VPN credentials, and let the scripts handle the rest.

An IPsec VPN encrypts your network traffic, so that nobody between you and the VPN server can eavesdrop on your data as it travels via the Internet. This is especially useful when using unsecured networks, e.g. at coffee shops, airports or hotel rooms.

We will use Libreswan as the IPsec server, and xl2tpd as the L2TP provider.

Read this in other languages: English, 简体中文.

Quick start
Features
Requirements
Installation
Next steps
Important notes
Upgrade Libreswan
Advanced usage
Bugs & Questions
Uninstallation
See also
License

Quick start

First, prepare your Linux server* with a fresh install of one of the following OS.

Use this one-liner to set up an IPsec VPN server:

Ubuntu & Debian

wget https://git.io/vpnsetup -O vpn.sh && sudo sh vpn.sh && sudo /opt/src/ikev2.sh --auto

CentOS & RHEL

wget https://git.io/vpnsetup-centos -O vpn.sh && sudo sh vpn.sh && sudo /opt/src/ikev2.sh --auto

Amazon Linux 2

wget https://git.io/vpnsetup-amzn -O vpn.sh && sudo sh vpn.sh && sudo /opt/src/ikev2.sh --auto

Your VPN login details will be randomly generated, and displayed on the screen when finished.

For other installation options and how to set up VPN clients, read the sections below.

* A dedicated server or virtual private server (VPS). OpenVZ VPS is not supported.

Features

New: The faster IPsec/XAuth ("Cisco IPsec") and IKEv2 modes are supported
New: A pre-built Docker image of the VPN server is now available
Fully automated IPsec VPN server setup, no user input needed
Encapsulates all VPN traffic in UDP - does not need ESP protocol
Can be directly used as "user-data" for a new Amazon EC2 instance
Includes sysctl.conf optimizations for improved performance
Tested with Ubuntu, Debian, CentOS/RHEL and Amazon Linux 2

Requirements

A newly created Amazon EC2 instance, from one of these images:

See detailed instructions and EC2 pricing. Alternatively, you may also deploy rapidly using CloudFormation.

-OR-

A dedicated server or virtual private server (VPS), freshly installed with one of the above OS. OpenVZ VPS is not supported, users could instead try OpenVPN.

This also includes Linux VMs in public clouds, such as DigitalOcean, Vultr, Linode, Google Compute Engine, Amazon Lightsail, Microsoft Azure, IBM Cloud, OVH and Rackspace.

» I want to run my own VPN but don't have a server for that

Advanced users can set up the VPN server on a $35 Raspberry Pi. See [1] [2].

* Debian 10 users should use the standard Linux kernel (not the "cloud" version). Read more here. If using Debian 10 on EC2, you must first switch to the standard Linux kernel before running the VPN setup script.
** Support for CentOS Linux 8 will end on December 31, 2021. Read more here.

⚠️ DO NOT run these scripts on your PC or Mac! They should only be used on a server!

Installation

First, update your system with apt-get update && apt-get dist-upgrade (Ubuntu/Debian) or yum update and reboot. This is optional, but recommended.

To install the VPN, please choose one of the following options:

Option 1: Have the script generate random VPN credentials for you (will be displayed when finished):

Ubuntu & Debian

wget https://git.io/vpnsetup -O vpn.sh && sudo sh vpn.sh

CentOS & RHEL

yum -y install wget
wget https://git.io/vpnsetup-centos -O vpn.sh && sudo sh vpn.sh

Amazon Linux 2

wget https://git.io/vpnsetup-amzn -O vpn.sh && sudo sh vpn.sh

After successful installation, it is recommended to set up IKEv2:

sudo bash /opt/src/ikev2.sh --auto

Option 2: Edit the script and provide your own VPN credentials:

Ubuntu & Debian

wget https://git.io/vpnsetup -O vpn.sh
nano -w vpn.sh
[Replace with your own values: YOUR_IPSEC_PSK, YOUR_USERNAME and YOUR_PASSWORD]
sudo sh vpn.sh

CentOS & RHEL

yum -y install wget nano
wget https://git.io/vpnsetup-centos -O vpn.sh
nano -w vpn.sh
[Replace with your own values: YOUR_IPSEC_PSK, YOUR_USERNAME and YOUR_PASSWORD]
sudo sh vpn.sh

Amazon Linux 2

wget https://git.io/vpnsetup-amzn -O vpn.sh
nano -w vpn.sh
[Replace with your own values: YOUR_IPSEC_PSK, YOUR_USERNAME and YOUR_PASSWORD]
sudo sh vpn.sh

Note: A secure IPsec PSK should consist of at least 20 random characters.

After successful installation, it is recommended to set up IKEv2:

sudo bash /opt/src/ikev2.sh --auto

Option 3: Define your VPN credentials as environment variables:

Ubuntu & Debian

# All values MUST be placed inside 'single quotes'
# DO NOT use these special characters within values: \ " '
wget https://git.io/vpnsetup -O vpn.sh
sudo VPN_IPSEC_PSK='your_ipsec_pre_shared_key' \
VPN_USER='your_vpn_username' \
VPN_PASSWORD='your_vpn_password' \
sh vpn.sh

CentOS & RHEL

# All values MUST be placed inside 'single quotes'
# DO NOT use these special characters within values: \ " '
yum -y install wget
wget https://git.io/vpnsetup-centos -O vpn.sh
sudo VPN_IPSEC_PSK='your_ipsec_pre_shared_key' \
VPN_USER='your_vpn_username' \
VPN_PASSWORD='your_vpn_password' \
sh vpn.sh

Amazon Linux 2

# All values MUST be placed inside 'single quotes'
# DO NOT use these special characters within values: \ " '
wget https://git.io/vpnsetup-amzn -O vpn.sh
sudo VPN_IPSEC_PSK='your_ipsec_pre_shared_key' \
VPN_USER='your_vpn_username' \
VPN_PASSWORD='your_vpn_password' \
sh vpn.sh

After successful installation, it is recommended to set up IKEv2:

sudo bash /opt/src/ikev2.sh --auto

Note: If unable to download via wget, you may also open vpnsetup.sh, vpnsetup_centos.sh or vpnsetup_amzn.sh, and click the Raw button on the right. Press Ctrl-A to select all, Ctrl-C to copy, then paste into your favorite editor.

Next steps

Get your computer or device to use the VPN. Please refer to:

Configure IPsec/L2TP VPN Clients

Configure IPsec/XAuth ("Cisco IPsec") VPN Clients

Guide: How to Set Up and Use IKEv2 VPN

If you get an error when trying to connect, see Troubleshooting.

Enjoy your very own VPN! ✨🎉🚀✨

Important notes

Read this in other languages: English, 简体中文.

Windows users: A one-time registry change is required if the VPN server or client is behind NAT (e.g. home router).

Android users: If you encounter connection issues, try these steps.

The same VPN account can be used by your multiple devices. However, due to an IPsec/L2TP limitation, if you wish to connect multiple devices simultaneously from behind the same NAT (e.g. home router), you must use only IPsec/XAuth mode, or set up IKEv2.

If you wish to view or update VPN user accounts, see Manage VPN Users. Helper scripts are included for convenience.

For servers with an external firewall (e.g. EC2/GCE), open UDP ports 500 and 4500 for the VPN. Aliyun users, see #433.

Clients are set to use Google Public DNS when the VPN is active. If another DNS provider is preferred, read below.

Using kernel support could improve IPsec/L2TP performance. It is available on all supported OS. Ubuntu users should install the linux-modules-extra-$(uname -r) (or linux-image-extra) package and run service xl2tpd restart.

The scripts will backup existing config files before making changes, with .old-date-time suffix.

Upgrade Libreswan

The additional scripts in extras/ can be used to upgrade Libreswan (changelog | announce). Edit the SWAN_VER variable as necessary. The latest supported version is 4.4. Check which version is installed: ipsec --version.

Ubuntu & Debian

wget https://git.io/vpnupgrade -O vpnup.sh && sudo sh vpnup.sh

CentOS & RHEL

wget https://git.io/vpnupgrade-centos -O vpnup.sh && sudo sh vpnup.sh

Amazon Linux 2

wget https://git.io/vpnupgrade-amzn -O vpnup.sh && sudo sh vpnup.sh

Advanced usage

Read this in other languages: English, 简体中文.

Use alternative DNS servers
DNS name and server IP changes
Internal VPN IPs and traffic
Access VPN server's subnet
IKEv2 only VPN
Modify IPTables rules

Use alternative DNS servers

Clients are set to use Google Public DNS when the VPN is active. If another DNS provider is preferred, you may replace 8.8.8.8 and 8.8.4.4 in these files: /etc/ppp/options.xl2tpd, /etc/ipsec.conf and /etc/ipsec.d/ikev2.conf (if exists). Then run service ipsec restart and service xl2tpd restart.

Advanced users can define VPN_DNS_SRV1 and optionally VPN_DNS_SRV2 when running the VPN setup script and the IKEv2 helper script. For example, if you want to use Cloudflare's DNS service:

sudo VPN_DNS_SRV1=1.1.1.1 VPN_DNS_SRV2=1.0.0.1 sh vpn.sh
sudo VPN_DNS_SRV1=1.1.1.1 VPN_DNS_SRV2=1.0.0.1 bash /opt/src/ikev2.sh --auto

DNS name and server IP changes

For IPsec/L2TP and IPsec/XAuth ("Cisco IPsec") modes, you may use a DNS name (e.g. vpn.example.com) instead of an IP address to connect to the VPN server, without additional configuration. In addition, the VPN should generally continue to work after server IP changes, such as after restoring a snapshot to a new server with a different IP, although a reboot may be required.

For IKEv2 mode, if you want the VPN to continue to work after server IP changes, you must specify a DNS name to be used as the VPN server's address when setting up IKEv2. The DNS name must be a fully qualified domain name (FQDN). Example:

sudo VPN_DNS_NAME='vpn.example.com' bash /opt/src/ikev2.sh --auto

Alternatively, you may customize IKEv2 setup options by running the helper script without the --auto parameter.

Internal VPN IPs and traffic

When connecting using IPsec/L2TP mode, the VPN server has internal IP 192.168.42.1 within the VPN subnet 192.168.42.0/24. Clients are assigned internal IPs from 192.168.42.10 to 192.168.42.250. To check which IP is assigned to a client, view the connection status on the VPN client.

When connecting using IPsec/XAuth ("Cisco IPsec") or IKEv2 mode, the VPN server does NOT have an internal IP within the VPN subnet 192.168.43.0/24. Clients are assigned internal IPs from 192.168.43.10 to 192.168.43.250.

You may use these internal VPN IPs for communication. However, note that the IPs assigned to VPN clients are dynamic, and firewalls on client devices may block such traffic.

For IPsec/L2TP mode ONLY: You may optionally assign static IPs to VPN clients. Click here for details.

Advanced users can optionally assign static internal IPs to VPN clients. This applies to IPsec/L2TP mode ONLY, and is NOT supported for the IKEv2 and IPsec/XAuth ("Cisco IPsec") modes. See example steps below, commands must be run as root.

First, create a new VPN user for each VPN client that you want to assign a static IP to. Refer to Manage VPN Users. Helper scripts are included for convenience.
Edit /etc/xl2tpd/xl2tpd.conf on the VPN server. Replace ip range = 192.168.42.10-192.168.42.250 with e.g. ip range = 192.168.42.100-192.168.42.250. This reduces the pool of auto-assigned IP addresses, so that more IPs are available to assign to clients as static IPs.
Edit /etc/ppp/chap-secrets on the VPN server. For example, if the file contains:
```
"username1"  l2tpd  "password1"  *
"username2"  l2tpd  "password2"  *
"username3"  l2tpd  "password3"  *
```
Let's assume that you want to assign static IP 192.168.42.2 to VPN user username2, assign static IP 192.168.42.3 to VPN user username3, while keeping username1 unchanged (auto-assign from the pool). After editing, the file should look like:
```
"username1"  l2tpd  "password1"  *
"username2"  l2tpd  "password2"  192.168.42.2
"username3"  l2tpd  "password3"  192.168.42.3
```
Note: The assigned static IP(s) must be from the subnet 192.168.42.0/24, and must NOT be from the pool of auto-assigned IPs (see ip range above). In addition, 192.168.42.1 is reserved for the VPN server itself. In the example above, you can only assign static IP(s) from the range 192.168.42.2-192.168.42.99.
(Important) Restart the xl2tpd service:
```
service xl2tpd restart
```

Client-to-client traffic is allowed by default. If you want to disallow client-to-client traffic, run the following commands on the VPN server. Add them to /etc/rc.local to persist after reboot.

iptables -I FORWARD 2 -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j DROP
iptables -I FORWARD 3 -s 192.168.43.0/24 -d 192.168.43.0/24 -j DROP

Access VPN server's subnet

After connecting to the VPN, VPN clients can generally access services running on other devices that are within the same local subnet as the VPN server, without additional configuration. For example, if the VPN server's local subnet is 192.168.0.0/24, and an Nginx server is running on IP 192.168.0.2, VPN clients can use IP 192.168.0.2 to access the Nginx server.

Please note, additional configuration is required if the VPN server has multiple network interfaces (e.g. eth0 and eth1), and you want VPN clients to access the local subnet behind the network interface that is NOT for Internet access. In this scenario, you must run the following commands to add IPTables rules. To persist after reboot, you may add these commands to /etc/rc.local.

# Replace eth1 with the name of the network interface
# on the VPN server that you want VPN clients to access
netif=eth1
iptables -I FORWARD 2 -i "$netif" -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -I FORWARD 2 -i ppp+ -o "$netif" -j ACCEPT
iptables -I FORWARD 2 -i "$netif" -d 192.168.43.0/24 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -I FORWARD 2 -s 192.168.43.0/24 -o "$netif" -j ACCEPT
iptables -t nat -I POSTROUTING -s 192.168.43.0/24 -o "$netif" -m policy --dir out --pol none -j MASQUERADE
iptables -t nat -I POSTROUTING -s 192.168.42.0/24 -o "$netif" -j MASQUERADE

IKEv2 only VPN

Libreswan 4.2 and newer versions support the ikev1-policy config option. Using this option, advanced users can set up an IKEv2-only VPN, i.e. only IKEv2 connections are accepted by the VPN server, while IKEv1 connections (including the IPsec/L2TP and IPsec/XAuth ("Cisco IPsec") modes) are dropped.

To set up an IKEv2-only VPN, first install the VPN server and set up IKEv2 using instructions in this README. Then check Libreswan version using ipsec --version, and update Libreswan if needed. After that, edit /etc/ipsec.conf on the VPN server. Append ikev1-policy=drop to the end of the config setup section, indented by two spaces. Save the file and run service ipsec restart. When finished, you can run ipsec status to verify that only the ikev2-cp connection is enabled.

Modify IPTables rules

If you want to modify the IPTables rules after install, edit /etc/iptables.rules and/or /etc/iptables/rules.v4 (Ubuntu/Debian), or /etc/sysconfig/iptables (CentOS/RHEL). Then reboot your server.

Bugs & Questions

Got a question? Please first search other people's comments in this Gist and on my blog.
Ask VPN related questions on the Libreswan or strongSwan mailing list, or read these wikis: [1] [2] [3] [4] [5].
If you found a reproducible bug, open a GitHub Issue to submit a bug report.

Uninstallation

See Uninstall the VPN.

License

This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License
Attribution required: please include my name in any derivative and let me know how you have improved it!

24 KiB Raw Blame History

IPsec VPN Server Auto Setup Scripts

Table of Contents

Quick start

Features

Requirements

Installation

Next steps

Important notes

Upgrade Libreswan

Advanced usage

Use alternative DNS servers

DNS name and server IP changes

Internal VPN IPs and traffic

Access VPN server's subnet

IKEv2 only VPN

Modify IPTables rules

Bugs & Questions

Uninstallation

See also

License

24 KiB

Raw Blame History