mirror/setup-ipsec-vpn
1
0
Fork 0
mirror of synced 2024-11-21 20:46:10 +03:00
Code Issues Projects Releases Wiki Activity
master
setup-ipsec-vpn/docs/clients.md
hwdsl2 2e069eaa1f Update docs
2024-09-07 12:47:19 -05:00

33 KiB
Raw Permalink Blame History

English | 中文

Configure IPsec/L2TP VPN Clients

After setting up your own VPN server, follow these steps to configure your devices. IPsec/L2TP is natively supported by Android, iOS, OS X, and Windows. There is no additional software to install. Setup should only take a few minutes. In case you are unable to connect, first check to make sure the VPN credentials were entered correctly.

Windows

You may also connect using IKEv2 mode (recommended).

Windows 11

  1. Right-click on the wireless/network icon in your system tray.
  2. Select Network and Internet settings, then on the page that opens, click VPN.
  3. Click the Add VPN button.
  4. Select Windows (built-in) in the VPN provider drop-down menu.
  5. Enter anything you like in the Connection name field.
  6. Enter Your VPN Server IP in the Server name or address field.
  7. Select L2TP/IPsec with pre-shared key in the VPN type drop-down menu.
  8. Enter Your VPN IPsec PSK in the Pre-shared key field.
  9. Enter Your VPN Username in the User name field.
  10. Enter Your VPN Password in the Password field.
  11. Check the Remember my sign-in info checkbox.
  12. Click Save to save the VPN connection details.

Note: This one-time registry change is required if the VPN server and/or client is behind NAT (e.g. home router).

To connect to the VPN: Click the Connect button, or click on the wireless/network icon in your system tray, click VPN, then select the new VPN entry and click Connect. If prompted, enter Your VPN Username and Password, then click OK. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

Windows 10 and 8

  1. Right-click on the wireless/network icon in your system tray.
  2. Select Open Network & Internet settings, then on the page that opens, click Network and Sharing Center.
  3. Click Set up a new connection or network.
  4. Select Connect to a workplace and click Next.
  5. Click Use my Internet connection (VPN).
  6. Enter Your VPN Server IP in the Internet address field.
  7. Enter anything you like in the Destination name field, and then click Create.
  8. Return to Network and Sharing Center. On the left, click Change adapter settings.
  9. Right-click on the new VPN entry and choose Properties.
  10. Click the Security tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the Type of VPN.
  11. Click Allow these protocols. Check the "Challenge Handshake Authentication Protocol (CHAP)" and "Microsoft CHAP Version 2 (MS-CHAP v2)" checkboxes.
  12. Click the Advanced settings button.
  13. Select Use preshared key for authentication and enter Your VPN IPsec PSK for the Key.
  14. Click OK to close the Advanced settings.
  15. Click OK to save the VPN connection details.

Note: This one-time registry change is required if the VPN server and/or client is behind NAT (e.g. home router).

To connect to the VPN: Click on the wireless/network icon in your system tray, select the new VPN entry, and click Connect. If prompted, enter Your VPN Username and Password, then click OK. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

Alternatively, instead of following the steps above, you may create the VPN connection using these Windows PowerShell commands. Replace Your VPN Server IP and Your VPN IPsec PSK with your own values, enclosed in single quotes:

# Disable persistent command history
Set-PSReadlineOption –HistorySaveStyle SaveNothing
# Create VPN connection
Add-VpnConnection -Name 'My IPsec VPN' -ServerAddress 'Your VPN Server IP' `
  -L2tpPsk 'Your VPN IPsec PSK' -TunnelType L2tp -EncryptionLevel Required `
  -AuthenticationMethod Chap,MSChapv2 -Force -RememberCredential -PassThru
# Ignore the data encryption warning (data is encrypted in the IPsec tunnel)

Windows 7, Vista and XP

  1. Click on the Start Menu and go to the Control Panel.
  2. Go to the Network and Internet section.
  3. Click Network and Sharing Center.
  4. Click Set up a new connection or network.
  5. Select Connect to a workplace and click Next.
  6. Click Use my Internet connection (VPN).
  7. Enter Your VPN Server IP in the Internet address field.
  8. Enter anything you like in the Destination name field.
  9. Check the Don't connect now; just set it up so I can connect later checkbox.
  10. Click Next.
  11. Enter Your VPN Username in the User name field.
  12. Enter Your VPN Password in the Password field.
  13. Check the Remember this password checkbox.
  14. Click Create, and then Close.
  15. Return to Network and Sharing Center. On the left, click Change adapter settings.
  16. Right-click on the new VPN entry and choose Properties.
  17. Click the Options tab and uncheck Include Windows logon domain.
  18. Click the Security tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the Type of VPN.
  19. Click Allow these protocols. Check the "Challenge Handshake Authentication Protocol (CHAP)" and "Microsoft CHAP Version 2 (MS-CHAP v2)" checkboxes.
  20. Click the Advanced settings button.
  21. Select Use preshared key for authentication and enter Your VPN IPsec PSK for the Key.
  22. Click OK to close the Advanced settings.
  23. Click OK to save the VPN connection details.

Note: This one-time registry change is required if the VPN server and/or client is behind NAT (e.g. home router).

To connect to the VPN: Click on the wireless/network icon in your system tray, select the new VPN entry, and click Connect. If prompted, enter Your VPN Username and Password, then click OK. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

OS X (macOS)

macOS 13 (Ventura) and newer

You may also connect using IKEv2 (recommended) or IPsec/XAuth mode.

  1. Open System Settings and go to the Network section.
  2. Click VPN on the right hand side of the window.
  3. Click the Add VPN Configuration drop-down menu and select L2TP over IPSec.
  4. In the window that opens, enter anything you like for the Display name.
  5. Leave Configuration as Default.
  6. Enter Your VPN Server IP for the Server address.
  7. Enter Your VPN Username for the Account name.
  8. Select Password from the User authentication drop-down menu.
  9. Enter Your VPN Password for the Password.
  10. Select Shared secret from the Machine authentication drop-down menu.
  11. Enter Your VPN IPsec PSK for the Shared secret.
  12. Leave the Group name field blank.
  13. (Important before you click create) Click the Options tab, and make sure the Send all traffic over VPN connection toggle is ON.
  14. (Important before you click create) Click the TCP/IP tab, and select Link-local only from the Configure IPv6 drop-down menu.
  15. Click Create to save the VPN configuration.
  16. To show VPN status in your menu bar and for shortcut access, go to the Control Center section of System Settings. Scroll to the bottom and select Show in Menu Bar from the VPN drop-down menu.

To connect to the VPN: Use the menu bar icon, or go to the VPN section of System Settings and toggle the switch for your VPN configuration. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

macOS 12 (Monterey) and older

You may also connect using IKEv2 (recommended) or IPsec/XAuth mode.

  1. Open System Preferences and go to the Network section.
  2. Click the + button in the lower-left corner of the window.
  3. Select VPN from the Interface drop-down menu.
  4. Select L2TP over IPSec from the VPN Type drop-down menu.
  5. Enter anything you like for the Service Name.
  6. Click Create.
  7. Enter Your VPN Server IP for the Server Address.
  8. Enter Your VPN Username for the Account Name.
  9. Click the Authentication Settings button.
  10. In the User Authentication section, select the Password radio button and enter Your VPN Password.
  11. In the Machine Authentication section, select the Shared Secret radio button and enter Your VPN IPsec PSK.
  12. Click OK.
  13. Check the Show VPN status in menu bar checkbox.
  14. (Important) Click the Advanced button and make sure the Send all traffic over VPN connection checkbox is checked.
  15. (Important) Click the TCP/IP tab, and make sure Link-local only is selected in the Configure IPv6 section.
  16. Click OK to close the Advanced settings, and then click Apply to save the VPN connection information.

To connect to the VPN: Use the menu bar icon, or go to the Network section of System Preferences, select the VPN and choose Connect. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

Android

Important: Android users should instead connect using IKEv2 mode (recommended), which is more secure. Android 12+ only supports IKEv2 mode. The native VPN client in Android uses the less secure modp1024 (DH group 2) for the IPsec/L2TP and IPsec/XAuth ("Cisco IPsec") modes.

If you still want to connect using IPsec/L2TP mode, you must first edit /etc/ipsec.conf on the VPN server. Find the line ike=... and append ,aes256-sha2;modp1024,aes128-sha1;modp1024 at the end. Save the file and run service ipsec restart.

Docker users: Add VPN_ENABLE_MODP1024=yes to your env file, then re-create the Docker container.

After that, follow the steps below on your Android device:

  1. Launch the Settings application.
  2. Tap "Network & internet". Or, if using Android 7 or earlier, tap More... in the Wireless & networks section.
  3. Tap VPN.
  4. Tap Add VPN Profile or the + icon at top-right of screen.
  5. Enter anything you like in the Name field.
  6. Select L2TP/IPSec PSK in the Type drop-down menu.
  7. Enter Your VPN Server IP in the Server address field.
  8. Leave the L2TP secret field blank.
  9. Leave the IPSec identifier field blank.
  10. Enter Your VPN IPsec PSK in the IPSec pre-shared key field.
  11. Tap Save.
  12. Tap the new VPN connection.
  13. Enter Your VPN Username in the Username field.
  14. Enter Your VPN Password in the Password field.
  15. Check the Save account information checkbox.
  16. Tap Connect.

Once connected, you will see a VPN icon in the notification bar. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

iOS

You may also connect using IKEv2 (recommended) or IPsec/XAuth mode.

  1. Go to Settings -> General -> VPN.
  2. Tap Add VPN Configuration....
  3. Tap Type. Select L2TP and go back.
  4. Tap Description and enter anything you like.
  5. Tap Server and enter Your VPN Server IP.
  6. Tap Account and enter Your VPN Username.
  7. Tap Password and enter Your VPN Password.
  8. Tap Secret and enter Your VPN IPsec PSK.
  9. Make sure the Send All Traffic switch is ON.
  10. Tap Done.
  11. Slide the VPN switch ON.

Once connected, you will see a VPN icon in the status bar. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

Chrome OS

You may also connect using IKEv2 mode (recommended).

  1. Go to Settings -> Network.
  2. Click Add connection, then click Add built-in VPN.
  3. Enter anything you like for the Service name.
  4. Select L2TP/IPsec in the Provider type drop-down menu.
  5. Enter Your VPN Server IP for the Server hostname.
  6. Select Pre-shared key in the Authentication type drop-down menu.
  7. Enter Your VPN Username for the Username.
  8. Enter Your VPN Password for the Password.
  9. Enter Your VPN IPsec PSK for the Pre-shared key.
  10. Leave other fields blank.
  11. Enable Save identity and password.
  12. Click Connect.

Once connected, you will see a VPN icon overlay on the network status icon. You can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

If you get an error when trying to connect, see Troubleshooting.

Linux

You may also connect using IKEv2 mode (recommended).

Ubuntu Linux

Ubuntu 18.04 (and newer) users can install the network-manager-l2tp-gnome package using apt, then configure the IPsec/L2TP VPN client using the GUI.

  1. Go to Settings -> Network -> VPN. Click the + button.
  2. Select Layer 2 Tunneling Protocol (L2TP).
  3. Enter anything you like in the Name field.
  4. Enter Your VPN Server IP for the Gateway.
  5. Enter Your VPN Username for the User name.
  6. Right-click the ? in the Password field, select Store the password only for this user.
  7. Enter Your VPN Password for the Password.
  8. Leave the NT Domain field blank.
  9. Click the IPsec Settings... button.
  10. Check the Enable IPsec tunnel to L2TP host checkbox.
  11. Leave the Gateway ID field blank.
  12. Enter Your VPN IPsec PSK for the Pre-shared key.
  13. Expand the Advanced section.
  14. Enter aes128-sha1-modp2048 for the Phase1 Algorithms.
  15. Enter aes128-sha1 for the Phase2 Algorithms.
  16. Click OK, then click Add to save the VPN connection information.
  17. Turn the VPN switch ON.

If you get an error when trying to connect, try this fix.

Once connected, you can verify that your traffic is being routed properly by looking up your IP address on Google. It should say "Your public IP address is Your VPN Server IP".

Fedora and CentOS

Fedora 28 (and newer) and CentOS 8/7 users can connect using IPsec/XAuth mode.

Other Linux

First check here to see if the network-manager-l2tp and network-manager-l2tp-gnome packages are available for your Linux distribution. If yes, install them (select strongSwan) and follow the instructions above. Alternatively, you may configure Linux VPN clients using the command line.

Configure Linux VPN clients using the command line

Advanced users can configure Linux VPN clients using the command line. Alternatively, you may connect using IKEv2 mode (recommended), or configure using the GUI. Instructions below are inspired by the work of Peter Sanford. Commands must be run as root on your VPN client.

To set up the VPN client, first install the following packages:

# Ubuntu and Debian
apt-get update
apt-get install strongswan xl2tpd net-tools

# Fedora
yum install strongswan xl2tpd net-tools

# CentOS
yum install epel-release
yum --enablerepo=epel install strongswan xl2tpd net-tools

Create VPN variables (replace with actual values):

VPN_SERVER_IP='your_vpn_server_ip'
VPN_IPSEC_PSK='your_ipsec_pre_shared_key'
VPN_USER='your_vpn_username'
VPN_PASSWORD='your_vpn_password'

Configure strongSwan:

cat > /etc/ipsec.conf <<EOF
# ipsec.conf - strongSwan IPsec configuration file

conn myvpn
  auto=add
  keyexchange=ikev1
  authby=secret
  type=transport
  left=%defaultroute
  leftprotoport=17/1701
  rightprotoport=17/1701
  right=$VPN_SERVER_IP
  ike=aes128-sha1-modp2048
  esp=aes128-sha1
EOF

cat > /etc/ipsec.secrets <<EOF
: PSK "$VPN_IPSEC_PSK"
EOF

chmod 600 /etc/ipsec.secrets

# For CentOS and Fedora ONLY
mv /etc/strongswan/ipsec.conf /etc/strongswan/ipsec.conf.old 2>/dev/null
mv /etc/strongswan/ipsec.secrets /etc/strongswan/ipsec.secrets.old 2>/dev/null
ln -s /etc/ipsec.conf /etc/strongswan/ipsec.conf
ln -s /etc/ipsec.secrets /etc/strongswan/ipsec.secrets

Configure xl2tpd:

cat > /etc/xl2tpd/xl2tpd.conf <<EOF
[lac myvpn]
lns = $VPN_SERVER_IP
ppp debug = yes
pppoptfile = /etc/ppp/options.l2tpd.client
length bit = yes
EOF

cat > /etc/ppp/options.l2tpd.client <<EOF
ipcp-accept-local
ipcp-accept-remote
refuse-eap
require-chap
noccp
noauth
mtu 1280
mru 1280
noipdefault
defaultroute
usepeerdns
connect-delay 5000
name "$VPN_USER"
password "$VPN_PASSWORD"
EOF

chmod 600 /etc/ppp/options.l2tpd.client

The VPN client setup is now complete. Follow the steps below to connect.

Note: You must repeat all steps below every time you try to connect to the VPN.

Create xl2tpd control file:

mkdir -p /var/run/xl2tpd
touch /var/run/xl2tpd/l2tp-control

Restart services:

service strongswan restart

# For Ubuntu 20.04, if strongswan service not found
ipsec restart

service xl2tpd restart

Start the IPsec connection:

# Ubuntu and Debian
ipsec up myvpn

# CentOS and Fedora
strongswan up myvpn

Start the L2TP connection:

echo "c myvpn" > /var/run/xl2tpd/l2tp-control

Run ifconfig and check the output. You should now see a new interface ppp0.

Check your existing default route:

ip route

Find this line in the output: default via X.X.X.X .... Write down this gateway IP for use in the two commands below.

Exclude your VPN server's public IP from the new default route (replace with actual value):

route add YOUR_VPN_SERVER_PUBLIC_IP gw X.X.X.X

If your VPN client is a remote server, you must also exclude your Local PC's public IP from the new default route, to prevent your SSH session from being disconnected (replace with actual value):

route add YOUR_LOCAL_PC_PUBLIC_IP gw X.X.X.X

Add a new default route to start routing traffic via the VPN server：

route add default dev ppp0

The VPN connection is now complete. Verify that your traffic is being routed properly:

wget -qO- http://ipv4.icanhazip.com; echo

The above command should return Your VPN Server IP.

To stop routing traffic via the VPN server:

route del default dev ppp0

To disconnect:

# Ubuntu and Debian
echo "d myvpn" > /var/run/xl2tpd/l2tp-control
ipsec down myvpn

# CentOS and Fedora
echo "d myvpn" > /var/run/xl2tpd/l2tp-control
strongswan down myvpn

IKEv1 troubleshooting

Read this in other languages: English, 中文.

See also: IKEv2 troubleshooting and Advanced usage.

Check logs and VPN status

Commands below must be run as root (or using sudo).

First, restart services on the VPN server:

service ipsec restart
service xl2tpd restart

Docker users: Run docker restart ipsec-vpn-server.

Then reboot your VPN client device, and retry the connection. If still unable to connect, try removing and recreating the VPN connection. Make sure that the VPN server address and VPN credentials are entered correctly.

For servers with an external firewall (e.g. EC2/GCE), open UDP ports 500 and 4500 for the VPN.

Check the Libreswan (IPsec) and xl2tpd logs for errors:

# Ubuntu & Debian
grep pluto /var/log/auth.log
grep xl2tpd /var/log/syslog

# CentOS/RHEL, Rocky Linux, AlmaLinux, Oracle Linux & Amazon Linux 2
grep pluto /var/log/secure
grep xl2tpd /var/log/messages

# Alpine Linux
grep pluto /var/log/messages
grep xl2tpd /var/log/messages

Check the status of the IPsec VPN server:

ipsec status

Show currently established VPN connections:

ipsec trafficstatus

Windows error 809

Error 809: The network connection between your computer and the VPN server could not be established because the remote server is not responding. This could be because one of the network devices (e.g, firewalls, NAT, routers, etc) between your computer and the remote server is not configured to allow VPN connections. Please contact your Administrator or your service provider to determine which device may be causing the problem.

Note: The registry change below is only required if you use IPsec/L2TP mode to connect to the VPN. It is NOT required for the IKEv2 and IPsec/XAuth modes.

To fix this error, a one-time registry change is required because the VPN server and/or client is behind NAT (e.g. home router). Download and import the .reg file below, or run the following from an elevated command prompt. You must reboot your PC when finished.

  • For Windows Vista, 7, 8, 10 and 11 (download .reg file)

    REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f

  • For Windows XP ONLY (download .reg file)

    REG ADD HKLM\SYSTEM\CurrentControlSet\Services\IPSec /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f

Although uncommon, some Windows systems disable IPsec encryption, causing the connection to fail. To re-enable it, run the following command and reboot your PC.

  • For Windows XP, Vista, 7, 8, 10 and 11 (download .reg file)

    REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RasMan\Parameters /v ProhibitIpSec /t REG_DWORD /d 0x0 /f

Windows error 789 or 691

Error 789: The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.

Error 691: The remote connection was denied because the user name and password combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.

For error 789, click here for troubleshooting information. For error 691, you may try removing and recreating the VPN connection, by following the instructions in this document. Make sure that the VPN credentials are entered correctly.

Windows error 628 or 766

Error 628: The connection was terminated by the remote computer before it could be completed.

Error 766: A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.

To fix these errors, please follow these steps:

  1. Right-click on the wireless/network icon in your system tray.
  2. Windows 11: Select Network and Internet settings, then on the page that opens, click Advanced network settings. Click More network adapter options.
    Windows 10: Select Open Network & Internet settings, then on the page that opens, click Network and Sharing Center. On the left, click Change adapter settings.
    Windows 8/7: Select Open Network and Sharing Center. On the left, click Change adapter settings.
  3. Right-click on the new VPN connection, and choose Properties.
  4. Click the Security tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for Type of VPN.
  5. Click Allow these protocols. Check the "Challenge Handshake Authentication Protocol (CHAP)" and "Microsoft CHAP Version 2 (MS-CHAP v2)" checkboxes.
  6. Click the Advanced settings button.
  7. Select Use preshared key for authentication and enter Your VPN IPsec PSK for the Key.
  8. Click OK to close the Advanced settings.
  9. Click OK to save the VPN connection details.

Windows 10 connecting

If using Windows 10 and the VPN is stuck on "connecting" for more than a few minutes, try these steps:

  1. Right-click on the wireless/network icon in your system tray.
  2. Select Open Network & Internet settings, then on the page that opens, click VPN on the left.
  3. Select the new VPN entry, then click Connect. If prompted, enter Your VPN Username and Password, then click OK.

Windows 10/11 upgrades

After upgrading Windows 10/11 version (e.g. from 21H2 to 22H2), you may need to re-apply the fix above for Windows Error 809 and reboot.

Windows DNS leaks and IPv6

Windows 8, 10 and 11 use "smart multi-homed name resolution" by default, which may cause "DNS leaks" when using the native IPsec VPN client if your DNS servers on the Internet adapter are from the local network segment. To fix, you may either disable smart multi-homed name resolution, or configure your Internet adapter to use DNS servers outside your local network (e.g. 8.8.8.8 and 8.8.4.4). When finished, reboot your PC.

In addition, if your computer has IPv6 enabled, all IPv6 traffic (including DNS queries) will bypass the VPN. Learn how to disable IPv6 in Windows. If you need a VPN with IPv6 support, you could instead try OpenVPN or WireGuard.

Android/Linux MTU/MSS issues

Some Android devices and Linux systems have MTU/MSS issues, that they are able to connect to the VPN using IPsec/XAuth ("Cisco IPsec") or IKEv2 mode, but cannot open websites. If you encounter this problem, try running the following commands on the VPN server. If successful, you may add these commands to /etc/rc.local to persist after reboot.

iptables -t mangle -A FORWARD -m policy --pol ipsec --dir in \
  -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 \
  -j TCPMSS --set-mss 1360
iptables -t mangle -A FORWARD -m policy --pol ipsec --dir out \
  -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 \
  -j TCPMSS --set-mss 1360

echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc

Docker users: Instead of running the commands above, you may apply this fix by adding VPN_ANDROID_MTU_FIX=yes to your env file, then re-create the Docker container.

Reference: [1].

macOS send traffic over VPN

OS X (macOS) users: If you can successfully connect using IPsec/L2TP mode, but your public IP does not show Your VPN Server IP, read the macOS section above and complete these steps. Save VPN configuration and re-connect.

For macOS 13 (Ventura) and newer:

  1. Click the Options tab, and make sure the Send all traffic over VPN connection toggle is ON.
  2. Click the TCP/IP tab, and select Link-local only from the Configure IPv6 drop-down menu.

For macOS 12 (Monterey) and older:

  1. Click the Advanced button and make sure the Send all traffic over VPN connection checkbox is checked.
  2. Click the TCP/IP tab, and make sure Link-local only is selected in the Configure IPv6 section.

After trying the steps above, if your computer is still not sending traffic over the VPN, check the service order. From the main network preferences screen, select "set service order" in the cog drop down under the list of connections. Drag the VPN connection to the top.

iOS/Android sleep mode

To save battery, iOS devices (iPhone/iPad) will automatically disconnect Wi-Fi shortly after the screen turns off (sleep mode). As a result, the IPsec VPN disconnects. This behavior is by design and cannot be configured.

If you need the VPN to auto-reconnect when the device wakes up, you may connect using IKEv2 mode (recommended) and enable the "VPN On Demand" feature. Alternatively, you may try OpenVPN instead, which has support for options such as "Reconnect on Wakeup" and "Seamless Tunnel".

Android devices may also disconnect Wi-Fi after entering sleep mode. You may try enabling the "Always-on VPN" option to stay connected. Learn more here.

Debian kernel

Debian users: Run uname -r to check your server's Linux kernel version. If it contains the word "cloud", and /dev/ppp is missing, then the kernel lacks ppp support and cannot use IPsec/L2TP mode. The VPN setup scripts try to detect this and show a warning. In this case, you may instead use IKEv2 or IPsec/XAuth mode to connect to the VPN.

To fix the issue with IPsec/L2TP mode, you may switch to the standard Linux kernel by installing e.g. the linux-image-amd64 package. Then update the default kernel in GRUB and reboot your server.

License

Note: This license applies to this document only.

Copyright (C) 2016-2024 Lin Song View my profile on LinkedIn
Inspired by the work of Joshua Lund

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.