mirror/openvpn-install
1
0
Fork 0
mirror of https://github.com/Nyr/openvpn-install.git synced 2024-11-24 05:56:08 +03:00
Code Issues Projects Releases Wiki Activity
e52970decc
openvpn-install/README.md
Chris Xiao e52970decc
fixed formatting in documentation
2018-07-24 23:25:48 -04:00

3.6 KiB
Raw Blame History

OpenVPN Installer

To Developers and Users

WARNING: Only Trust Signed Commits.

Table of Contents

Description

OpenVPN installer for Debian, Ubuntu and CentOS, with support for OpenVPN over SSL.

This script lets you set up your own OpenVPN server in minutes, even if you no experience OpenVPN before. It's designed to be as simple, unobtrusive, and universal as possible.

Installation

If you run into any issues during installation, please refer to Troubleshooting.

Install on CentOS/Debian/Ubuntu

  • Please note: if your server is running the following OS versions, please select AES-256-CBC when you're asked to select a cipher mode.

    • CentOS 6 or older
    • Debian 8 (Jessie) or older
    • Ubuntu 16.10 or older

  • Run this in a terminal on your server, and follow the on-screen instructions:

    # Download the script
wget https://raw.githubusercontent.com/birkhoffcheng/openvpn-install/master/openvpn-install.sh

# Run the install script
sudo bash openvpn-install.sh

# Note: If you're running Ubuntu 16.10 or older

# Start stunnel (only if you're using OpenVPN over SSL)
sudo stunnel

  • Once it finishes, your OpenVPN server is up and running! You should set up client devices next.

Client setup

Before continuing...

  • Download stunnel.conf and the .ovpn file from your server.
  • If your username is root, they're located at /root.
  • Otherwise, they're located at /home/<YOUR USERNAME>.

OS-specific setup processes

Troubleshooting

  • wget: command not found: This means that wget isn't install it on your server. Just install it and try again. To install wget:

    # Run this on Debian/Ubuntu
sudo apt -y install wget

# Run this on CentOS
sudo yum -y install wget

  • The TUN device is not available. You need to enable TUN before running this script: Follow this guide.

  • If you're unable to connect to your server with OpenVPN...

    • Please check if stunnel is running on your device. (if you're using OpenVPN over SSL)

      • On Windows, check if the stunnel icon is present in the Task Bar (bottom right).
      • Run this to check on MacOS or Linux (both client and server)
      # You should see stunnel in the output
ps -A | grep stunnel

    • Also check if both stunnel (if applicable) and OpenVPN are running on your server.

      # You should see stunnel in the output (if you're using OpenVPN over SSL)
ps -A | grep stunnel

# You should see openvpn in the output
ps -A | grep openvpn

    • If you still can't connect, try removing and reinstalling OpenVPN on your server.

      • Run the install script and select Uninstall
      • Run the install script again and make sure you enter the correct information.

FAQ

Where to find a VPS

You can get a VPS for as little as $2.50/month (IPv6 only) or $5/month (with IPv4) at Vultr or $5/month (with IPv4) at DigitalOcean.

Donations

If you want to show your appreciation, you can donate via PayPal or Bitcoin (12R4euPg17EfJyYNfdTxjiQ2SctW1b4CRz). Thanks!