While deep nesting will not work on a standard `<select>`, we can
emulate it through data objects still, and just handle the display
of the data in the results.
This also means that the horrific deep-nested CSS is back to handle
the padding. I hope that will get fixed over time.
This also fixes one of the performance issues with adding array
data, as options are added at the very end instead of one by one.
Due to a change in 7edf0e3ebe that
made the rendered selection take up the full width of the selection
container, the placeholder was not being automatically displayed.
The calculations were always turning out negative, which has been
fixed by not trying to automatically calculate the best possible
width.
Because of the change made previously to make events global, any
time a result message was triggered there would be a stack overflow.
This was because we were re-triggering the event locally if it
happened on a global level, which would start the loop.
This has been fixed so the event is never caught locally, but
instead uses the global handler.
The `AllowClear` decorator appears to work fine with multiple
selects, so we've chosen to remove remove it. This adds some
styling and fixes the check so it all works as expected.
This closes https://github.com/select2/select2/issues/2903.
This fixes an issue where the `x` in multiple selects (visible next
to the option) would be visible even if the container was disabled.
Because it was still accepting events as well, this would cause the
underlying data to be changed, even though it was disabled. We now
hide the icon using CSS so this issue doesn't occur.
The same applies to the `x` for clearing a placeholder.
https://github.com/select2/select2/issues/2903
Also pull the logic for automatically closing the dropdown into the
dropdown adapter, taking it out of the core.
The `selected` and `unselected` events are now `select` and
`unselect`, which is what many of the other adapters were expecting
them to be.
Some tests for placeholders have been added.
Now Select2 can fire jQuery events that will match the corresponding
internal events. The `open` and `close` events are now publicly
accessible.
The selection adapter was chosen because it is the least likely to
be moved, but handles the most common events. This `EventRelay`
decorator should theoretically be able to decorate any of the
adapters, as they all have the `bind` method that it needs.
The star event will allow us to relay any custom events as well as
the ones used internally by Select2. This also makes it much
easier to start triggering events in general, as we don't need to
relay it in the core anymore.
A module has been created for the jQuery-facing events, and the
release announcement has been updated to mention the event name
changes.
This also adds some documentation about the public events.
For the dropdown search on single select instances, the search
focus should happen in a `setTimeout` call. This is because many
browsers trigger the element focus on `click`, so our original call
to `$search.focus` will essentially be ignored. By also focusing
it in a timeout, this will delay the call to `focus` so the browser
will no longer take it back.
We do not have this issue for multiple select instances, as they
trigger the `open` event on `click`, instead of using `mousedown`.
This fixes https://github.com/select2/select2/issues/2900.
There was a plan to universally use an array as the return from
query methods, but now that we've realized pagination and extra
things are impossible without it, we're going back to the return
object. Anyone looking to migrate their data should be returning
an object with the key `results` containing what they previously
returned.
This should fix https://github.com/select2/select2/issues/2898
This fixes the SASS error caused by the `&[dir="rtl"]` selector in
the `_single.scss` and `_multiple.scss` files. We were expecting
these files to be nested within the `.select-container` class, which
would have made this a non-error as the `&` would refer to the
`.select2-container` class that was wrapping the `@import`.
This moves the `@import` statements into the `.select2-container`
class, so this no longer triggers an error in the Ruby version of
SASS.
This closes https://github.com/select2/select2/issues/2896
jQuery.mousewheel will allow us to prevent the dropdown from
automatically closing when the user scrolls to the end of the list.
It is automatically bundled in the full versions of Select2 and
we don't require that it is included in order for Select2 to work.
jQuery.mousewheel was taken directly from the source repository
using the commit at
cc2c5d73ae
I'm still not quite sure how this should be handled for the general
case, but for the special case we have this for infinite scrolling,
only on AJAX data.
This will always clone the options that are passed in when
initializing Select2 on multiple objects (like `$("select")`) so
it doesn't always assume that the configuration is the exact same.
This prevents any reference-based tricks for modifying the data
within Select2, but some would look at that as an upside.
The documentation for templates still needs to be created.
A warning is now generated in the console for applications using
the previous data attributes that have been migrated.
Now that the data objects have the `element` property, we can test
to make sure it's a DOM element and then use it for selecting the
option. This allows us to select multiple options with the same id,
as well as handle cases where that is already happening.
You cannot use `$e.val()` to select two options with the same id,
as jQuery will reject it, but you can set the second option to
`.selected = true`, which is supported.
alt-down/up is the standard way of opening a select when using a
screen reader. This also fixes the gradient in IE, so now it
displays the right colors. Also added a note about Placeholders.js,
so the placeholders on multi-select boxes will work in IE 9 and
below.
Added a disabled state for Select2. This will correctly listen to
property changes (so when the disabled property is changed) and
update the state of Select2 to reflect it.
Added a utility function to find a method to a different context.
With the recent changes to how Select2 works internally, this really
isn't needed. This has been added to make the migration path
easier, and it just internally calls `val` on the underlying select
element. The only difference is that the `val` function will now
convert any non-string elements to strings.
The second argument (`triggerChange`) has not been migrated, as
Select2 now internally relies on the `change` event.
**Note:** As the old `initSelection` method has not been migrated,
it is not possible to set the `val` on remote data sources where
the value has not previously been selected.
The backspace key now behaves very similar to how it does in other
multiple select boxes, such as the one that Stack Exchange uses.
When the user presses the backspace key, the last selected option
is unselected and the search box is filled with the text of the
option.
`dropdownParent` controls the location of the dropdown when it is
automatically added to the DOM. By default, this is the body
element but it can be modified based on where the user needs it.
In past versions of Select2, a mask was used to detect clicks
outside of the dropdown. While this works with high accuracy, and
avoid many of the click issues we had with modals, it is no longer
the default close handler for Select2. It blocks any features on
the container from working without a second click, and introduces
odd edge cases that we cannot easily handle.
Up until now, the container could only have a dropdown that was
displayed below the container. While this worked well, there are
some cases where the dropdown should be displayed above the
container. Most notably, this is when the conatainer is displayed
towards the bottom of the page, and displaying the dropdown would
cause the page to be extended. Because we close the dropdown
when the page is scrolled, the user would not be able to access any
options that were displayed outside of the viewpoint.
Because of the order that events are fired, we attach the handlers
for repositioning the dropdown after results are displayed when the
container is opened for the first time. This allows it to be
registered after the results container registers their events, so
the dropdown is repositioned after the results have been displayed.
The logic for determining the direction that the dropdown will be
shown in is very similar to the positioning code used in
Select2 3.x. Unlike previous versions of Select2, a class is used
to indicate the direction of the dropdown, even if it is displaying
below the container.
The themes provided with Select2 have been updated to correctly
render the dropdown in both directions.
This now matches how the browser works, where the dropdown is
closed when the window scrolls.
The arrow was also covering the clear placeholder icon, this has
now been fixed and the clear icon is now placed correctly.
When the dropdown is in the dropdown that is attached to the body,
the call to `show` causes `display: inline` to be set directly on
the search container. This causes rendering issues, so this change
uses a class instead of calling `show` and `hide` directly.
This is most likely a jQuery bug of some form, as it only happens
when using the dropdown that is attached to the body.
In Select2 3.x, the dropdown is attached to the body element and
it is floated above all other elements.
In Select2 4.x, the dropdown is attached directly to the Select2
container, which allows us to skip any special placing logic. This
happens to be how Chosen currently does it, and it prevents us
from having the dropdown display up, as well as a few other strange
issues that can't be prevented.
This new module will most likely become the default, as it matches
the functionality of Select2 3.x and has quite a few advantages.
The other positioning code will need to be broken out into a
separate module in the future.
The main container should not need to position the individual
components. This makes it easier for components to override where
they should be placed, such as adding the dropdown outside of the
container.
When destroying Select2, an error could be raised while destroying
the selection container. This was because the destroy handler was
relying on the container id being present.
The old functionality has been restored where Select2 will destroy
itself when it is initialized again.
This is inspired by https://github.com/ivaynberg/select2/issues/2826
and starts the general transition to using selectors with a lower
specificity. This should make it considerably easier to override
the styles in the long run.
Unfortunately libsass does not support the SASS 3.3 style for BEM
where we can just use `&__m` for defining sub-modules. For now we
are still using a limited amount of nesting, but nowhere near as
much as we did in the past.
Now the search box is automatically resized for placeholders to
fit the available space, so we don't need to worry about the
placeholder not being visible. When the placeholder doesn't need
to be visible, the size of the search box is determined based on
the length of the current search term.
This adds a search box to the main container for multiple select
boxes, similar to the what the old version had. This can still be
swapped out such that the search box displays above the results
like it previously did.
The placeholder for multiple selects will also now use the input
attribute of the search box instead of generating a custom element.
This also changes the selector for the search container to
`.select2-search`, which is consistent with the old class and
reduces the complexity of the selectors.
This fixes an issue with how decorators worked, where the constructor
from the parent class would clobber the custom constructor that is
generated for the new decorated class. This has been fixed by
excluding the constructor from the list of fields which are
transferred when decorating classes.
This adds a dictionary for converting diacritics to a normalized
representation. This dictionary is used in the default matcher.
The code for stripping the diacritics was pulled from the current
implementation in Select2 3.x.
This migrates over the required English translations under their
new names.
The "Searching" message has also been adjusted to use "Searching..."
instead of "Loading more results...", which is what it used to
say sometimes.
This also changes the AJAX handler to call `abort` when needed.
Now when searching, a loading message is prepended to the top of
the results. This replaces the old spinner image and allows for it
to be translated across different languages.
The loading message can be styled differently and is passed
through the results formatters.
Previously, a result was no longer highlighted when the mouse was
no longer over it. While this was useful for resetting the
highlight automatically, we started doing this when a new result
was highlighted to make sure that we never had multiple options
highlighted.
Now, a result will always be highlighted until the highlight is
removed when the next result is highlighted. While this shouldn't
affect many users, it is closer to how native select boxes work.
This also allows users using keyboard navigation to jump between
mouse and keyboard navigation without the highlight reseting to
the top of the results.
This fixes many of the speed issues the results had when working
with large data sets. jQuery has been completely dropped, with the
exception of setting the data, which does not require a jQuery
object but instead works directly with the DOM. This does not
include options with children, which still uses jQuery to deal
with the nested objects.
This only works with IE 8+, which is fine.
This fixes caching when querying, so the data object no longer
needs to be completely regenerated whenever the `<option>` is
queried.
While this does not fix the speed issues on the first opening of
the instance, it does fix the speed issues during searching.
This improves the speeds of creating the `<option>` tags for array
data. By creating the HTML ahead of time and putting it into an
`<option>` element before passing it to jQuery, it cuts down on the
time it takes for jQuery to process the HTML string and convert it
into DOM elements. This proved to be incredibly slow.
This also changes the `item` function to return early when the
data exists. The `$e.data` call has also been switched to a
`$.data` call, which doesn't need to check the DOM to see if the
data attributes already exist. This cuts down on a bit of wasted
time, as the `data` key should never be present in the DOM, and it
should be ignored if it is.
Now the options are mostly generated by hand before being passed
off to jQuery for templating. This fixes much of the speed issues
we had when they were entirely being generated through jQuery.
This converts individual objects passed in through the `array`
parameter to `<option>` tags when Select2 is initialized. This
removes a lot of duplicate code from the `ArrayAdapter`, and keeps
everything closer to the native `<select>` element.
This introduces a breaking change from previous versions of Select2,
where the initial value for array data was blank, even if a blank
option was not present in the original array of objects. Now the
first object passed in will be selected by default, following the
behavior of a standard `<select>` element.
This breaking change does not affect `<select multiple="multiple">`
elements, which by default have no selection.
The matcher example now matches the old matcher example, and the
compatibility module has been turned into a function decorator
instead of a class decorator.
Only show the "No results found" message when there are no results
visible in the list. This avoid issues when loading more data, and
it returns no results.
Only try to see if the load more button is visible if it is present
in the DOM. This prevents making continuous requests when there are
no more results.
This starts work on the example, which currently uses the GitHub
API.
The `ajax.delay` option has been added that allows for debouncing
requests made within a certain number of milliseconds.
This allows for any control to emit key events, and for the Select2
instance to handle them. So now the search box will allow for
results to be scrolled and selected, bringing back the old expected
functionality. This also stops triggering new queries when the
arrow keys are pressed.
The container will also be automatically focused when the dropdown
is closed, which is consistent with the old Select2.
The results will no longer be queried on initialization, but
instead will be queried when the dropdown is opened. This is more
consistent with the previous version of Select2.
The search box will now be cleared when the dropdown is closed.
The placeholder will not only be automatically hidden if the
results adapter was not already overridden. This will allow users
to override the results adapter to now hide the placeholder, if
they do not want that functionality.
This allows them to be overridden, allowing for things like
attaching the dropdown to a different part of the DOM.
The id is also now generated in a function that can be overridden.
This adds a custom r.js build for i18n, which processes each JS
file in the `select2/i18n` directory and builds it.
So far only the "No results found" translation has been added.
Now that `define` and `require` are never made public, we have to
build everything to support `$.fn.select2.amd` while also working
with other AMD loaders.
This will prevent leaking variables, and will remove the possibility
of Select2 not working well with other plugins which support
AMD loaders. The `define` and `require` methods are now aliased
under `$.Select2.amd` for use inside additional files, such as
translations.
