diff --git a/wireguard-install.sh b/wireguard-install.sh
index ce73a07..5a852a1 100644
--- a/wireguard-install.sh
+++ b/wireguard-install.sh
@@ -9,121 +9,121 @@ GREEN='\033[0;32m'
 NC='\033[0m'
 
 function isRoot() {
-	if [ "${EUID}" -ne 0 ]; then
-		echo "You need to run this script as root"
-		exit 1
-	fi
+  if [ "${EUID}" -ne 0 ]; then
+    echo "You need to run this script as root"
+    exit 1
+  fi
 }
 
 function checkVirt() {
-	if [ "$(systemd-detect-virt)" == "openvz" ]; then
-		echo "OpenVZ is not supported"
-		exit 1
-	fi
+  if [ "$(systemd-detect-virt)" == "openvz" ]; then
+    echo "OpenVZ is not supported"
+    exit 1
+  fi
 
-	if [ "$(systemd-detect-virt)" == "lxc" ]; then
-		echo "LXC is not supported (yet)."
-		echo "WireGuard can technically run in an LXC container,"
-		echo "but the kernel module has to be installed on the host,"
-		echo "the container has to be run with some specific parameters"
-		echo "and only the tools need to be installed in the container."
-		exit 1
-	fi
+  if [ "$(systemd-detect-virt)" == "lxc" ]; then
+    echo "LXC is not supported (yet)."
+    echo "WireGuard can technically run in an LXC container,"
+    echo "but the kernel module has to be installed on the host,"
+    echo "the container has to be run with some specific parameters"
+    echo "and only the tools need to be installed in the container."
+    exit 1
+  fi
 }
 
 function checkOS() {
-	source /etc/os-release
-	OS="${ID}"
-	if [[ ${OS} == "debian" || ${OS} == "raspbian" ]]; then
-		if [[ ${VERSION_ID} -lt 10 ]]; then
-			echo "Your version of Debian (${VERSION_ID}) is not supported. Please use Debian 10 Buster or later"
-			exit 1
-		fi
-		OS=debian # overwrite if raspbian
-	elif [[ ${OS} == "ubuntu" ]]; then
-		RELEASE_YEAR=$(echo "${VERSION_ID}" | cut -d'.' -f1)
-		if [[ ${RELEASE_YEAR} -lt 18 ]]; then
-			echo "Your version of Ubuntu (${VERSION_ID}) is not supported. Please use Ubuntu 18.04 or later"
-			exit 1
-		fi
-	elif [[ ${OS} == "fedora" ]]; then
-		if [[ ${VERSION_ID} -lt 32 ]]; then
-			echo "Your version of Fedora (${VERSION_ID}) is not supported. Please use Fedora 32 or later"
-			exit 1
-		fi
-	elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
-		if [[ ${VERSION_ID} == 7* ]]; then
-			echo "Your version of CentOS (${VERSION_ID}) is not supported. Please use CentOS 8 or later"
-			exit 1
-		fi
-	elif [[ -e /etc/oracle-release ]]; then
-		source /etc/os-release
-		OS=oracle
-	elif [[ -e /etc/arch-release ]]; then
-		OS=arch
-	else
-		echo "Looks like you aren't running this installer on a Debian, Ubuntu, Fedora, CentOS, AlmaLinux, Oracle or Arch Linux system"
-		exit 1
-	fi
+  source /etc/os-release
+  OS="${ID}"
+  if [[ ${OS} == "debian" || ${OS} == "raspbian" ]]; then
+    if [[ ${VERSION_ID} -lt 10 ]]; then
+      echo "Your version of Debian (${VERSION_ID}) is not supported. Please use Debian 10 Buster or later"
+      exit 1
+    fi
+    OS=debian # overwrite if raspbian
+  elif [[ ${OS} == "ubuntu" ]]; then
+    RELEASE_YEAR=$(echo "${VERSION_ID}" | cut -d'.' -f1)
+    if [[ ${RELEASE_YEAR} -lt 18 ]]; then
+      echo "Your version of Ubuntu (${VERSION_ID}) is not supported. Please use Ubuntu 18.04 or later"
+      exit 1
+    fi
+  elif [[ ${OS} == "fedora" ]]; then
+    if [[ ${VERSION_ID} -lt 32 ]]; then
+      echo "Your version of Fedora (${VERSION_ID}) is not supported. Please use Fedora 32 or later"
+      exit 1
+    fi
+  elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
+    if [[ ${VERSION_ID} == 7* ]]; then
+      echo "Your version of CentOS (${VERSION_ID}) is not supported. Please use CentOS 8 or later"
+      exit 1
+    fi
+  elif [[ -e /etc/oracle-release ]]; then
+    source /etc/os-release
+    OS=oracle
+  elif [[ -e /etc/arch-release ]]; then
+    OS=arch
+  else
+    echo "Looks like you aren't running this installer on a Debian, Ubuntu, Fedora, CentOS, AlmaLinux, Oracle or Arch Linux system"
+    exit 1
+  fi
 }
 
 function getHomeDirForClient() {
-	local CLIENT_NAME=$1
+  local CLIENT_NAME=$1
 
-	if [ -z "${CLIENT_NAME}" ]; then
-		echo "Error: getHomeDirForClient() requires a client name as argument"
-		exit 1
-	fi
+  if [ -z "${CLIENT_NAME}" ]; then
+    echo "Error: getHomeDirForClient() requires a client name as argument"
+    exit 1
+  fi
 
-	# Home directory of the user, where the client configuration will be written
-	if [ -e "/home/${CLIENT_NAME}" ]; then
-		# if $1 is a user name
-		HOME_DIR="/home/${CLIENT_NAME}"
-	elif [ "${SUDO_USER}" ]; then
-		# if not, use SUDO_USER
-		if [ "${SUDO_USER}" == "root" ]; then
-			# If running sudo as root
-			HOME_DIR="/root"
-		else
-			HOME_DIR="/home/${SUDO_USER}"
-		fi
-	else
-		# if not SUDO_USER, use /root
-		HOME_DIR="/root"
-	fi
+  # Home directory of the user, where the client configuration will be written
+  if [ -e "/home/${CLIENT_NAME}" ]; then
+    # if $1 is a user name
+    HOME_DIR="/home/${CLIENT_NAME}"
+  elif [ "${SUDO_USER}" ]; then
+    # if not, use SUDO_USER
+    if [ "${SUDO_USER}" == "root" ]; then
+      # If running sudo as root
+      HOME_DIR="/root"
+    else
+      HOME_DIR="/home/${SUDO_USER}"
+    fi
+  else
+    # if not SUDO_USER, use /root
+    HOME_DIR="/root"
+  fi
 
-	echo "$HOME_DIR"
+  echo "$HOME_DIR"
 }
 
 function initialCheck() {
-	isRoot
-	checkVirt
-	checkOS
+  isRoot
+  checkVirt
+  checkOS
 }
 
 function installQuestions() {
-	echo "Welcome to the WireGuard installer!"
-	echo "The git repository is available at: https://github.com/angristan/wireguard-install"
-	echo ""
-	echo "I need to ask you a few questions before starting the setup."
-	echo "You can keep the default options and just press enter if you are ok with them."
-	echo ""
+  echo "Welcome to the WireGuard installer!"
+  echo "The git repository is available at: https://github.com/angristan/wireguard-install"
+  echo ""
+  echo "I need to ask you a few questions before starting the setup."
+  echo "You can keep the default options and just press enter if you are ok with them."
+  echo ""
 
-	# Detect public IPv4 or IPv6 address and pre-fill for the user
-	SERVER_PUB_IP=${SERVER_PUB_IP:-$(ip -4 addr | sed -ne 's|^.* inet \([^/]*\)/.* scope global.*$|\1|p' | awk '{print $1}' | head -1)}
-	if [[ -z ${SERVER_PUB_IP} ]]; then
-		# Detect public IPv6 address
-		SERVER_PUB_IP=$(ip -6 addr | sed -ne 's|^.* inet6 \([^/]*\)/.* scope global.*$|\1|p' | head -1)
-	fi
+  # Detect public IPv4 or IPv6 address and pre-fill for the user
+  SERVER_PUB_IP=${SERVER_PUB_IP:-$(ip -4 addr | sed -ne 's|^.* inet \([^/]*\)/.* scope global.*$|\1|p' | awk '{print $1}' | head -1)}
+  if [[ -z ${SERVER_PUB_IP} ]]; then
+    # Detect public IPv6 address
+    SERVER_PUB_IP=$(ip -6 addr | sed -ne 's|^.* inet6 \([^/]*\)/.* scope global.*$|\1|p' | head -1)
+  fi
 
-	APPROVE_IP=${APPROVE_IP:-n}
-	if [[ ${APPROVE_IP} =~ n ]]; then
-		read -rp "IPv4 or IPv6 public address: " -e -i "${SERVER_PUB_IP}" SERVER_PUB_IP
-	fi
+  APPROVE_IP=${APPROVE_IP:-n}
+  if [[ ${APPROVE_IP} =~ n ]]; then
+    read -rp "IPv4 or IPv6 public address: " -e -i "${SERVER_PUB_IP}" SERVER_PUB_IP
+  fi
 
-	# Detect public interface and pre-fill for the user
-	SERVER_NIC="${SERVER_NIC:-$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)' | head -1)}"
-	APPROVE_NIC=${APPROVE_NIC:-n}
+  # Detect public interface and pre-fill for the user
+  SERVER_NIC="${SERVER_NIC:-$(ip -4 route ls | grep default | grep -Po '(?<=dev )(\S+)' | head -1)}"
+  APPROVE_NIC=${APPROVE_NIC:-n}
   if [[ ${APPROVE_IP} =~ n ]]; then
     until [[ ${SERVER_PUB_NIC} =~ ^[a-zA-Z0-9_]+$ || ${APPROVE_NIC} =~ n ]]; do
       read -rp "Public interface: " -e -i "${SERVER_NIC}" SERVER_PUB_NIC
@@ -132,50 +132,50 @@ function installQuestions() {
     SERVER_PUB_NIC="${SERVER_NIC}"
   fi
 
-	until [[ ${SERVER_WG_NIC} =~ ^[a-zA-Z0-9_]+$ && ${#SERVER_WG_NIC} -lt 16 ]]; do
-		read -rp "WireGuard interface name: " -e -i "${SERVER_WG_NIC_DEFAULT}" SERVER_WG_NIC
-	done
+  until [[ ${SERVER_WG_NIC} =~ ^[a-zA-Z0-9_]+$ && ${#SERVER_WG_NIC} -lt 16 ]]; do
+    read -rp "WireGuard interface name: " -e -i "${SERVER_WG_NIC_DEFAULT}" SERVER_WG_NIC
+  done
 
-	until [[ ${SERVER_WG_IPV4} =~ ^([0-9]{1,3}\.){3} ]]; do
-		read -rp "Server WireGuard IPv4: " -e -i "${SERVER_WG_IPV4_DEFAULT}" SERVER_WG_IPV4
-	done
+  until [[ ${SERVER_WG_IPV4} =~ ^([0-9]{1,3}\.){3} ]]; do
+    read -rp "Server WireGuard IPv4: " -e -i "${SERVER_WG_IPV4_DEFAULT}" SERVER_WG_IPV4
+  done
 
-	until [[ ${SERVER_WG_IPV6} =~ ^([a-f0-9]{1,4}:){3,4}: ]]; do
-		read -rp "Server WireGuard IPv6: " -e -i "${SERVER_WG_IPV6_DEFAULT}" SERVER_WG_IPV6
-	done
+  until [[ ${SERVER_WG_IPV6} =~ ^([a-f0-9]{1,4}:){3,4}: ]]; do
+    read -rp "Server WireGuard IPv6: " -e -i "${SERVER_WG_IPV6_DEFAULT}" SERVER_WG_IPV6
+  done
 
-	# Generate random number within private ports range
-	RANDOM_PORT=$(shuf -i49152-65535 -n1)
-	until [[ ${SERVER_PORT} =~ ^[0-9]+$ ]] && [ "${SERVER_PORT}" -ge 1 ] && [ "${SERVER_PORT}" -le 65535 ]; do
-		read -rp "Server WireGuard port [1-65535]: " -e -i "${RANDOM_PORT}" SERVER_PORT
-	done
+  # Generate random number within private ports range
+  RANDOM_PORT=$(shuf -i49152-65535 -n1)
+  until [[ ${SERVER_PORT} =~ ^[0-9]+$ ]] && [ "${SERVER_PORT}" -ge 1 ] && [ "${SERVER_PORT}" -le 65535 ]; do
+    read -rp "Server WireGuard port [1-65535]: " -e -i "${RANDOM_PORT}" SERVER_PORT
+  done
 
-	# Adguard DNS by default
-	until [[ ${CLIENT_DNS_1} =~ ^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; do
-		read -rp "First DNS resolver to use for the clients: " -e -i "${CLIENT_DNS_1_DEFAULT}" CLIENT_DNS_1
-	done
-	until [[ ${CLIENT_DNS_2} =~ ^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; do
-		read -rp "Second DNS resolver to use for the clients (optional): " -e -i "${CLIENT_DNS_2_DEFAULT}" CLIENT_DNS_2
-		if [[ ${CLIENT_DNS_2} == "" ]]; then
-			CLIENT_DNS_2="${CLIENT_DNS_1}"
-		fi
-	done
+  # Adguard DNS by default
+  until [[ ${CLIENT_DNS_1} =~ ^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; do
+    read -rp "First DNS resolver to use for the clients: " -e -i "${CLIENT_DNS_1_DEFAULT}" CLIENT_DNS_1
+  done
+  until [[ ${CLIENT_DNS_2} =~ ^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$ ]]; do
+    read -rp "Second DNS resolver to use for the clients (optional): " -e -i "${CLIENT_DNS_2_DEFAULT}" CLIENT_DNS_2
+    if [[ ${CLIENT_DNS_2} == "" ]]; then
+      CLIENT_DNS_2="${CLIENT_DNS_1}"
+    fi
+  done
 
-	until [[ ${ALLOWED_IPS} =~ ^.+$ ]]; do
-		echo -e "\nWireGuard uses a parameter called AllowedIPs to determine what is routed over the VPN."
-		read -rp "Allowed IPs list for generated clients (leave default to route everything): " -e -i '0.0.0.0/0,::/0' ALLOWED_IPS
-		if [[ ${ALLOWED_IPS} == "" ]]; then
-			ALLOWED_IPS="${ALLOWED_IPS_DEFAULTS}"
-		fi
-	done
+  until [[ ${ALLOWED_IPS} =~ ^.+$ ]]; do
+    echo -e "\nWireGuard uses a parameter called AllowedIPs to determine what is routed over the VPN."
+    read -rp "Allowed IPs list for generated clients (leave default to route everything): " -e -i '0.0.0.0/0,::/0' ALLOWED_IPS
+    if [[ ${ALLOWED_IPS} == "" ]]; then
+      ALLOWED_IPS="${ALLOWED_IPS_DEFAULTS}"
+    fi
+  done
 
-	echo ""
-	echo "Okay, that was all I needed. We are ready to setup your WireGuard server now."
-	echo "You will be able to generate a client at the end of the installation."
-	APPROVE_INSTALL=${APPROVE_INSTALL:-n}
-	if [[ $APPROVE_INSTALL =~ n ]]; then
-		read -n1 -r -p "Press any key to continue..."
-	fi
+  echo ""
+  echo "Okay, that was all I needed. We are ready to setup your WireGuard server now."
+  echo "You will be able to generate a client at the end of the installation."
+  APPROVE_INSTALL=${APPROVE_INSTALL:-n}
+  if [[ $APPROVE_INSTALL =~ n ]]; then
+    read -n1 -r -p "Press any key to continue..."
+  fi
 }
 
 function installWireGuard() {
@@ -187,71 +187,71 @@ function installWireGuard() {
   ALLOWED_IPS_DEFAULTS="0.0.0.0/0,::/0"
 
   if [[ ${APPROVE_INSTALL} == "y" ]]; then
-		# Set default choices so that no questions will be asked.
-		APPROVE_IP=${APPROVE_IP:-y}
-		APPROVE_NIC=${APPROVE_NIC:-y}
-		SERVER_WG_NIC=${SERVER_WG_NIC:-$SERVER_WG_NIC_DEFAULT}
-		SERVER_WG_IPV4=${SERVER_WG_IPV4:-$SERVER_WG_IPV4_DEFAULT}
-		SERVER_WG_IPV6=${SERVER_WG_IPV6:-$SERVER_WG_IPV6_DEFAULT}
-		SERVER_PORT=${SERVER_PORT:-$(shuf -i49152-65535 -n1)}
-		CLIENT_DNS_1=${CLIENT_DNS_1:-$CLIENT_DNS_1_DEFAULT}
-		CLIENT_DNS_2=${CLIENT_DNS_2:-$CLIENT_DNS_2_DEFAULT}
-		CLIENT_NAME=${CLIENT_NAME:-client}
+    # Set default choices so that no questions will be asked.
+    APPROVE_IP=${APPROVE_IP:-y}
+    APPROVE_NIC=${APPROVE_NIC:-y}
+    SERVER_WG_NIC=${SERVER_WG_NIC:-$SERVER_WG_NIC_DEFAULT}
+    SERVER_WG_IPV4=${SERVER_WG_IPV4:-$SERVER_WG_IPV4_DEFAULT}
+    SERVER_WG_IPV6=${SERVER_WG_IPV6:-$SERVER_WG_IPV6_DEFAULT}
+    SERVER_PORT=${SERVER_PORT:-$(shuf -i49152-65535 -n1)}
+    CLIENT_DNS_1=${CLIENT_DNS_1:-$CLIENT_DNS_1_DEFAULT}
+    CLIENT_DNS_2=${CLIENT_DNS_2:-$CLIENT_DNS_2_DEFAULT}
+    CLIENT_NAME=${CLIENT_NAME:-client}
     ALLOWED_IPS=${ALLOWED_IPS:-$ALLOWED_IPS_DEFAULTS}
 
-		# Behind NAT, we'll default to the publicly reachable IPv4.
-		SERVER_PUB_IP=${SERVER_PUB_IP:-$(curl -s https://api.ipify.org)}
-	fi
+    # Behind NAT, we'll default to the publicly reachable IPv4.
+    SERVER_PUB_IP=${SERVER_PUB_IP:-$(curl -s https://api.ipify.org)}
+  fi
 
-	# Run setup questions first
-	installQuestions
+  # Run setup questions first
+  installQuestions
 
-	# Install WireGuard tools and module
-	if [[ ${OS} == 'ubuntu' ]] || [[ ${OS} == 'debian' && ${VERSION_ID} -gt 10 ]]; then
-		apt-get update
-		apt-get install -y wireguard iptables resolvconf qrencode
-	elif [[ ${OS} == 'debian' ]]; then
-		if ! grep -rqs "^deb .* buster-backports" /etc/apt/; then
-			echo "deb http://deb.debian.org/debian buster-backports main" >/etc/apt/sources.list.d/backports.list
-			apt-get update
-		fi
-		apt update
-		apt-get install -y iptables resolvconf qrencode
-		apt-get install -y -t buster-backports wireguard
-	elif [[ ${OS} == 'fedora' ]]; then
-		if [[ ${VERSION_ID} -lt 32 ]]; then
-			dnf install -y dnf-plugins-core
-			dnf copr enable -y jdoss/wireguard
-			dnf install -y wireguard-dkms
-		fi
-		dnf install -y wireguard-tools iptables qrencode
-	elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
-		if [[ ${VERSION_ID} == 8* ]]; then
-			yum install -y epel-release elrepo-release
-			yum install -y kmod-wireguard
-			yum install -y qrencode # not available on release 9
-		fi
-		yum install -y wireguard-tools iptables
-	elif [[ ${OS} == 'oracle' ]]; then
-		dnf install -y oraclelinux-developer-release-el8
-		dnf config-manager --disable -y ol8_developer
-		dnf config-manager --enable -y ol8_developer_UEKR6
-		dnf config-manager --save -y --setopt=ol8_developer_UEKR6.includepkgs='wireguard-tools*'
-		dnf install -y wireguard-tools qrencode iptables
-	elif [[ ${OS} == 'arch' ]]; then
-		pacman -S --needed --noconfirm wireguard-tools qrencode
-	fi
+  # Install WireGuard tools and module
+  if [[ ${OS} == 'ubuntu' ]] || [[ ${OS} == 'debian' && ${VERSION_ID} -gt 10 ]]; then
+    apt-get update
+    apt-get install -y wireguard iptables resolvconf qrencode
+  elif [[ ${OS} == 'debian' ]]; then
+    if ! grep -rqs "^deb .* buster-backports" /etc/apt/; then
+      echo "deb http://deb.debian.org/debian buster-backports main" >/etc/apt/sources.list.d/backports.list
+      apt-get update
+    fi
+    apt update
+    apt-get install -y iptables resolvconf qrencode
+    apt-get install -y -t buster-backports wireguard
+  elif [[ ${OS} == 'fedora' ]]; then
+    if [[ ${VERSION_ID} -lt 32 ]]; then
+      dnf install -y dnf-plugins-core
+      dnf copr enable -y jdoss/wireguard
+      dnf install -y wireguard-dkms
+    fi
+    dnf install -y wireguard-tools iptables qrencode
+  elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
+    if [[ ${VERSION_ID} == 8* ]]; then
+      yum install -y epel-release elrepo-release
+      yum install -y kmod-wireguard
+      yum install -y qrencode # not available on release 9
+    fi
+    yum install -y wireguard-tools iptables
+  elif [[ ${OS} == 'oracle' ]]; then
+    dnf install -y oraclelinux-developer-release-el8
+    dnf config-manager --disable -y ol8_developer
+    dnf config-manager --enable -y ol8_developer_UEKR6
+    dnf config-manager --save -y --setopt=ol8_developer_UEKR6.includepkgs='wireguard-tools*'
+    dnf install -y wireguard-tools qrencode iptables
+  elif [[ ${OS} == 'arch' ]]; then
+    pacman -S --needed --noconfirm wireguard-tools qrencode
+  fi
 
-	# Make sure the directory exists (this does not seem the be the case on fedora)
-	mkdir /etc/wireguard >/dev/null 2>&1
+  # Make sure the directory exists (this does not seem the be the case on fedora)
+  mkdir /etc/wireguard >/dev/null 2>&1
 
-	chmod 600 -R /etc/wireguard/
+  chmod 600 -R /etc/wireguard/
 
-	SERVER_PRIV_KEY=$(wg genkey)
-	SERVER_PUB_KEY=$(echo "${SERVER_PRIV_KEY}" | wg pubkey)
+  SERVER_PRIV_KEY=$(wg genkey)
+  SERVER_PUB_KEY=$(echo "${SERVER_PRIV_KEY}" | wg pubkey)
 
-	# Save WireGuard settings
-	echo "SERVER_PUB_IP=${SERVER_PUB_IP}
+  # Save WireGuard settings
+  echo "SERVER_PUB_IP=${SERVER_PUB_IP}
 SERVER_PUB_NIC=${SERVER_PUB_NIC}
 SERVER_WG_NIC=${SERVER_WG_NIC}
 SERVER_WG_IPV4=${SERVER_WG_IPV4}
@@ -263,19 +263,19 @@ CLIENT_DNS_1=${CLIENT_DNS_1}
 CLIENT_DNS_2=${CLIENT_DNS_2}
 ALLOWED_IPS=${ALLOWED_IPS}" >/etc/wireguard/params
 
-	# Add server interface
-	echo "[Interface]
+  # Add server interface
+  echo "[Interface]
 Address = ${SERVER_WG_IPV4}/24,${SERVER_WG_IPV6}/64
 ListenPort = ${SERVER_PORT}
 PrivateKey = ${SERVER_PRIV_KEY}" >"/etc/wireguard/${SERVER_WG_NIC}.conf"
 
-	if pgrep firewalld; then
-		FIREWALLD_IPV4_ADDRESS=$(echo "${SERVER_WG_IPV4}" | cut -d"." -f1-3)".0"
-		FIREWALLD_IPV6_ADDRESS=$(echo "${SERVER_WG_IPV6}" | sed 's/:[^:]*$/:0/')
-		echo "PostUp = firewall-cmd --add-port ${SERVER_PORT}/udp && firewall-cmd --add-rich-rule='rule family=ipv4 source address=${FIREWALLD_IPV4_ADDRESS}/24 masquerade' && firewall-cmd --add-rich-rule='rule family=ipv6 source address=${FIREWALLD_IPV6_ADDRESS}/24 masquerade'
+  if pgrep firewalld; then
+    FIREWALLD_IPV4_ADDRESS=$(echo "${SERVER_WG_IPV4}" | cut -d"." -f1-3)".0"
+    FIREWALLD_IPV6_ADDRESS=$(echo "${SERVER_WG_IPV6}" | sed 's/:[^:]*$/:0/')
+    echo "PostUp = firewall-cmd --add-port ${SERVER_PORT}/udp && firewall-cmd --add-rich-rule='rule family=ipv4 source address=${FIREWALLD_IPV4_ADDRESS}/24 masquerade' && firewall-cmd --add-rich-rule='rule family=ipv6 source address=${FIREWALLD_IPV6_ADDRESS}/24 masquerade'
 PostDown = firewall-cmd --remove-port ${SERVER_PORT}/udp && firewall-cmd --remove-rich-rule='rule family=ipv4 source address=${FIREWALLD_IPV4_ADDRESS}/24 masquerade' && firewall-cmd --remove-rich-rule='rule family=ipv6 source address=${FIREWALLD_IPV6_ADDRESS}/24 masquerade'" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
-	else
-		echo "PostUp = iptables -I INPUT -p udp --dport ${SERVER_PORT} -j ACCEPT
+  else
+    echo "PostUp = iptables -I INPUT -p udp --dport ${SERVER_PORT} -j ACCEPT
 PostUp = iptables -I FORWARD -i ${SERVER_PUB_NIC} -o ${SERVER_WG_NIC} -j ACCEPT
 PostUp = iptables -I FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
 PostUp = iptables -t nat -A POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE
@@ -287,118 +287,118 @@ PostDown = iptables -D FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
 PostDown = iptables -t nat -D POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE
 PostDown = ip6tables -D FORWARD -i ${SERVER_WG_NIC} -j ACCEPT
 PostDown = ip6tables -t nat -D POSTROUTING -o ${SERVER_PUB_NIC} -j MASQUERADE" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
-	fi
+  fi
 
-	# Enable routing on the server
-	echo "net.ipv4.ip_forward = 1
+  # Enable routing on the server
+  echo "net.ipv4.ip_forward = 1
 net.ipv6.conf.all.forwarding = 1" >/etc/sysctl.d/wg.conf
 
-	sysctl --system
+  sysctl --system
 
-	systemctl start "wg-quick@${SERVER_WG_NIC}"
-	systemctl enable "wg-quick@${SERVER_WG_NIC}"
+  systemctl start "wg-quick@${SERVER_WG_NIC}"
+  systemctl enable "wg-quick@${SERVER_WG_NIC}"
 
-	newClient
-	echo -e "${GREEN}If you want to add more clients, you simply need to run this script another time!${NC}"
+  newClient
+  echo -e "${GREEN}If you want to add more clients, you simply need to run this script another time!${NC}"
 
-	# Check if WireGuard is running
-	systemctl is-active --quiet "wg-quick@${SERVER_WG_NIC}"
-	WG_RUNNING=$?
+  # Check if WireGuard is running
+  systemctl is-active --quiet "wg-quick@${SERVER_WG_NIC}"
+  WG_RUNNING=$?
 
-	# WireGuard might not work if we updated the kernel. Tell the user to reboot
-	if [[ ${WG_RUNNING} -ne 0 ]]; then
-		echo -e "\n${RED}WARNING: WireGuard does not seem to be running.${NC}"
-		echo -e "${ORANGE}You can check if WireGuard is running with: systemctl status wg-quick@${SERVER_WG_NIC}${NC}"
-		echo -e "${ORANGE}If you get something like \"Cannot find device ${SERVER_WG_NIC}\", please reboot!${NC}"
-	else # WireGuard is running
-		echo -e "\n${GREEN}WireGuard is running.${NC}"
-		echo -e "${GREEN}You can check the status of WireGuard with: systemctl status wg-quick@${SERVER_WG_NIC}\n\n${NC}"
-		echo -e "${ORANGE}If you don't have internet connectivity from your client, try to reboot the server.${NC}"
-	fi
+  # WireGuard might not work if we updated the kernel. Tell the user to reboot
+  if [[ ${WG_RUNNING} -ne 0 ]]; then
+    echo -e "\n${RED}WARNING: WireGuard does not seem to be running.${NC}"
+    echo -e "${ORANGE}You can check if WireGuard is running with: systemctl status wg-quick@${SERVER_WG_NIC}${NC}"
+    echo -e "${ORANGE}If you get something like \"Cannot find device ${SERVER_WG_NIC}\", please reboot!${NC}"
+  else # WireGuard is running
+    echo -e "\n${GREEN}WireGuard is running.${NC}"
+    echo -e "${GREEN}You can check the status of WireGuard with: systemctl status wg-quick@${SERVER_WG_NIC}\n\n${NC}"
+    echo -e "${ORANGE}If you don't have internet connectivity from your client, try to reboot the server.${NC}"
+  fi
 }
 
 function newClient() {
-	# If SERVER_PUB_IP is IPv6, add brackets if missing
-	if [[ ${SERVER_PUB_IP} =~ .*:.* ]]; then
-		if [[ ${SERVER_PUB_IP} != *"["* ]] || [[ ${SERVER_PUB_IP} != *"]"* ]]; then
-			SERVER_PUB_IP="[${SERVER_PUB_IP}]"
-		fi
-	fi
-	ENDPOINT="${SERVER_PUB_IP}:${SERVER_PORT}"
+  # If SERVER_PUB_IP is IPv6, add brackets if missing
+  if [[ ${SERVER_PUB_IP} =~ .*:.* ]]; then
+    if [[ ${SERVER_PUB_IP} != *"["* ]] || [[ ${SERVER_PUB_IP} != *"]"* ]]; then
+      SERVER_PUB_IP="[${SERVER_PUB_IP}]"
+    fi
+  fi
+  ENDPOINT="${SERVER_PUB_IP}:${SERVER_PORT}"
 
-	echo ""
-	echo "Client configuration"
-	echo ""
-	echo "The client name must consist of alphanumeric character(s). It may also include underscores or dashes and can't exceed 15 chars."
+  echo ""
+  echo "Client configuration"
+  echo ""
+  echo "The client name must consist of alphanumeric character(s). It may also include underscores or dashes and can't exceed 15 chars."
 
   CLIENT_EXISTS=$(grep -c -E "^### Client ${CLIENT_NAME}\$" "/etc/wireguard/${SERVER_WG_NIC}.conf")
-	until [[ ${CLIENT_NAME} =~ ^[a-zA-Z0-9_-]+$ && ${CLIENT_EXISTS} == '0' && ${#CLIENT_NAME} -lt 16 ]]; do
-		read -rp "Client name: " -e CLIENT_NAME
-		CLIENT_EXISTS=$(grep -c -E "^### Client ${CLIENT_NAME}\$" "/etc/wireguard/${SERVER_WG_NIC}.conf")
+  until [[ ${CLIENT_NAME} =~ ^[a-zA-Z0-9_-]+$ && ${CLIENT_EXISTS} == '0' && ${#CLIENT_NAME} -lt 16 ]]; do
+    read -rp "Client name: " -e CLIENT_NAME
+    CLIENT_EXISTS=$(grep -c -E "^### Client ${CLIENT_NAME}\$" "/etc/wireguard/${SERVER_WG_NIC}.conf")
 
-		if [[ ${CLIENT_EXISTS} != 0 ]]; then
-			echo ""
-			echo -e "${ORANGE}A client with the specified name was already created, please choose another name.${NC}"
-			echo ""
-		fi
-	done
+    if [[ ${CLIENT_EXISTS} != 0 ]]; then
+      echo ""
+      echo -e "${ORANGE}A client with the specified name was already created, please choose another name.${NC}"
+      echo ""
+    fi
+  done
 
-	for DOT_IP in {2..254}; do
-		DOT_EXISTS=$(grep -c "${SERVER_WG_IPV4::-1}${DOT_IP}" "/etc/wireguard/${SERVER_WG_NIC}.conf")
-		if [[ ${DOT_EXISTS} == '0' ]]; then
-			break
-		fi
-	done
+  for DOT_IP in {2..254}; do
+    DOT_EXISTS=$(grep -c "${SERVER_WG_IPV4::-1}${DOT_IP}" "/etc/wireguard/${SERVER_WG_NIC}.conf")
+    if [[ ${DOT_EXISTS} == '0' ]]; then
+      break
+    fi
+  done
 
-	if [[ ${DOT_EXISTS} == '1' ]]; then
-		echo ""
-		echo "The subnet configured supports only 253 clients."
-		exit 1
-	fi
+  if [[ ${DOT_EXISTS} == '1' ]]; then
+    echo ""
+    echo "The subnet configured supports only 253 clients."
+    exit 1
+  fi
 
-	BASE_IP=$(echo "$SERVER_WG_IPV4" | awk -F '.' '{ print $1"."$2"."$3 }')
-	until [[ ${IPV4_EXISTS} == '0' ]]; do
+  BASE_IP=$(echo "$SERVER_WG_IPV4" | awk -F '.' '{ print $1"."$2"."$3 }')
+  until [[ ${IPV4_EXISTS} == '0' ]]; do
 
     if [[ $APPROVE_INSTALL =~ n ]]; then
       read -rp "Client WireGuard IPv4: ${BASE_IP}." -e -i "${DOT_IP}" DOT_IP
     fi
 
-		CLIENT_WG_IPV4="${BASE_IP}.${DOT_IP}"
-		IPV4_EXISTS=$(grep -c "$CLIENT_WG_IPV4/32" "/etc/wireguard/${SERVER_WG_NIC}.conf")
+    CLIENT_WG_IPV4="${BASE_IP}.${DOT_IP}"
+    IPV4_EXISTS=$(grep -c "$CLIENT_WG_IPV4/32" "/etc/wireguard/${SERVER_WG_NIC}.conf")
 
-		if [[ ${IPV4_EXISTS} != 0 ]]; then
-			echo ""
-			echo -e "${ORANGE}A client with the specified IPv4 was already created, please choose another IPv4.${NC}"
-			echo ""
-		fi
-	done
+    if [[ ${IPV4_EXISTS} != 0 ]]; then
+      echo ""
+      echo -e "${ORANGE}A client with the specified IPv4 was already created, please choose another IPv4.${NC}"
+      echo ""
+    fi
+  done
 
-	BASE_IP=$(echo "$SERVER_WG_IPV6" | awk -F '::' '{ print $1 }')
-	until [[ ${IPV6_EXISTS} == '0' ]]; do
+  BASE_IP=$(echo "$SERVER_WG_IPV6" | awk -F '::' '{ print $1 }')
+  until [[ ${IPV6_EXISTS} == '0' ]]; do
 
     if [[ $APPROVE_INSTALL =~ n ]]; then
-		  read -rp "Client WireGuard IPv6: ${BASE_IP}::" -e -i "${DOT_IP}" DOT_IP
+      read -rp "Client WireGuard IPv6: ${BASE_IP}::" -e -i "${DOT_IP}" DOT_IP
     fi
 
-		CLIENT_WG_IPV6="${BASE_IP}::${DOT_IP}"
-		IPV6_EXISTS=$(grep -c "${CLIENT_WG_IPV6}/128" "/etc/wireguard/${SERVER_WG_NIC}.conf")
+    CLIENT_WG_IPV6="${BASE_IP}::${DOT_IP}"
+    IPV6_EXISTS=$(grep -c "${CLIENT_WG_IPV6}/128" "/etc/wireguard/${SERVER_WG_NIC}.conf")
 
-		if [[ ${IPV6_EXISTS} != 0 ]]; then
-			echo ""
-			echo -e "${ORANGE}A client with the specified IPv6 was already created, please choose another IPv6.${NC}"
-			echo ""
-		fi
-	done
+    if [[ ${IPV6_EXISTS} != 0 ]]; then
+      echo ""
+      echo -e "${ORANGE}A client with the specified IPv6 was already created, please choose another IPv6.${NC}"
+      echo ""
+    fi
+  done
 
-	# Generate key pair for the client
-	CLIENT_PRIV_KEY=$(wg genkey)
-	CLIENT_PUB_KEY=$(echo "${CLIENT_PRIV_KEY}" | wg pubkey)
-	CLIENT_PRE_SHARED_KEY=$(wg genpsk)
+  # Generate key pair for the client
+  CLIENT_PRIV_KEY=$(wg genkey)
+  CLIENT_PUB_KEY=$(echo "${CLIENT_PRIV_KEY}" | wg pubkey)
+  CLIENT_PRE_SHARED_KEY=$(wg genpsk)
 
-	HOME_DIR=$(getHomeDirForClient "${CLIENT_NAME}")
+  HOME_DIR=$(getHomeDirForClient "${CLIENT_NAME}")
 
-	# Create client file and add the server as a peer
-	echo "[Interface]
+  # Create client file and add the server as a peer
+  echo "[Interface]
 PrivateKey = ${CLIENT_PRIV_KEY}
 Address = ${CLIENT_WG_IPV4}/32,${CLIENT_WG_IPV6}/128
 DNS = ${CLIENT_DNS_1},${CLIENT_DNS_2}
@@ -409,157 +409,157 @@ PresharedKey = ${CLIENT_PRE_SHARED_KEY}
 Endpoint = ${ENDPOINT}
 AllowedIPs = ${ALLOWED_IPS}" >"${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"
 
-	# Add the client as a peer to the server
-	echo -e "\n### Client ${CLIENT_NAME}
+  # Add the client as a peer to the server
+  echo -e "\n### Client ${CLIENT_NAME}
 [Peer]
 PublicKey = ${CLIENT_PUB_KEY}
 PresharedKey = ${CLIENT_PRE_SHARED_KEY}
 AllowedIPs = ${CLIENT_WG_IPV4}/32,${CLIENT_WG_IPV6}/128" >>"/etc/wireguard/${SERVER_WG_NIC}.conf"
 
-	wg syncconf "${SERVER_WG_NIC}" <(wg-quick strip "${SERVER_WG_NIC}")
+  wg syncconf "${SERVER_WG_NIC}" <(wg-quick strip "${SERVER_WG_NIC}")
 
-	# Generate QR code if qrencode is installed
-	if command -v qrencode &>/dev/null; then
-		echo -e "${GREEN}\nHere is your client config file as a QR Code:\n${NC}"
-		qrencode -t ansiutf8 -l L <"${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"
-		echo ""
-	fi
+  # Generate QR code if qrencode is installed
+  if command -v qrencode &>/dev/null; then
+    echo -e "${GREEN}\nHere is your client config file as a QR Code:\n${NC}"
+    qrencode -t ansiutf8 -l L <"${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"
+    echo ""
+  fi
 
-	echo -e "${GREEN}Your client config file is in ${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf${NC}"
+  echo -e "${GREEN}Your client config file is in ${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf${NC}"
 }
 
 function listClients() {
-	NUMBER_OF_CLIENTS=$(grep -c -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf")
-	if [[ ${NUMBER_OF_CLIENTS} -eq 0 ]]; then
-		echo ""
-		echo "You have no existing clients!"
-		exit 1
-	fi
+  NUMBER_OF_CLIENTS=$(grep -c -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf")
+  if [[ ${NUMBER_OF_CLIENTS} -eq 0 ]]; then
+    echo ""
+    echo "You have no existing clients!"
+    exit 1
+  fi
 
-	grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | nl -s ') '
+  grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | nl -s ') '
 }
 
 function revokeClient() {
-	NUMBER_OF_CLIENTS=$(grep -c -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf")
-	if [[ ${NUMBER_OF_CLIENTS} == '0' ]]; then
-		echo ""
-		echo "You have no existing clients!"
-		exit 1
-	fi
+  NUMBER_OF_CLIENTS=$(grep -c -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf")
+  if [[ ${NUMBER_OF_CLIENTS} == '0' ]]; then
+    echo ""
+    echo "You have no existing clients!"
+    exit 1
+  fi
 
-	echo ""
-	echo "Select the existing client you want to revoke"
-	grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | nl -s ') '
-	until [[ ${CLIENT_NUMBER} -ge 1 && ${CLIENT_NUMBER} -le ${NUMBER_OF_CLIENTS} ]]; do
-		if [[ ${CLIENT_NUMBER} == '1' ]]; then
-			read -rp "Select one client [1]: " CLIENT_NUMBER
-		else
-			read -rp "Select one client [1-${NUMBER_OF_CLIENTS}]: " CLIENT_NUMBER
-		fi
-	done
+  echo ""
+  echo "Select the existing client you want to revoke"
+  grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | nl -s ') '
+  until [[ ${CLIENT_NUMBER} -ge 1 && ${CLIENT_NUMBER} -le ${NUMBER_OF_CLIENTS} ]]; do
+    if [[ ${CLIENT_NUMBER} == '1' ]]; then
+      read -rp "Select one client [1]: " CLIENT_NUMBER
+    else
+      read -rp "Select one client [1-${NUMBER_OF_CLIENTS}]: " CLIENT_NUMBER
+    fi
+  done
 
-	# match the selected number to a client name
-	CLIENT_NAME=$(grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | sed -n "${CLIENT_NUMBER}"p)
+  # match the selected number to a client name
+  CLIENT_NAME=$(grep -E "^### Client" "/etc/wireguard/${SERVER_WG_NIC}.conf" | cut -d ' ' -f 3 | sed -n "${CLIENT_NUMBER}"p)
 
-	# remove [Peer] block matching $CLIENT_NAME
-	sed -i "/^### Client ${CLIENT_NAME}\$/,/^$/d" "/etc/wireguard/${SERVER_WG_NIC}.conf"
+  # remove [Peer] block matching $CLIENT_NAME
+  sed -i "/^### Client ${CLIENT_NAME}\$/,/^$/d" "/etc/wireguard/${SERVER_WG_NIC}.conf"
 
-	# remove generated client file
-	HOME_DIR=$(getHomeDirForClient "${CLIENT_NAME}")
-	rm -f "${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"
+  # remove generated client file
+  HOME_DIR=$(getHomeDirForClient "${CLIENT_NAME}")
+  rm -f "${HOME_DIR}/${SERVER_WG_NIC}-client-${CLIENT_NAME}.conf"
 
-	# restart wireguard to apply changes
-	wg syncconf "${SERVER_WG_NIC}" <(wg-quick strip "${SERVER_WG_NIC}")
+  # restart wireguard to apply changes
+  wg syncconf "${SERVER_WG_NIC}" <(wg-quick strip "${SERVER_WG_NIC}")
 }
 
 function uninstallWg() {
-	echo ""
-	echo -e "\n${RED}WARNING: This will uninstall WireGuard and remove all the configuration files!${NC}"
-	echo -e "${ORANGE}Please backup the /etc/wireguard directory if you want to keep your configuration files.\n${NC}"
-	read -rp "Do you really want to remove WireGuard? [y/n]: " -e REMOVE
-	REMOVE=${REMOVE:-n}
-	if [[ $REMOVE == 'y' ]]; then
-		checkOS
+  echo ""
+  echo -e "\n${RED}WARNING: This will uninstall WireGuard and remove all the configuration files!${NC}"
+  echo -e "${ORANGE}Please backup the /etc/wireguard directory if you want to keep your configuration files.\n${NC}"
+  read -rp "Do you really want to remove WireGuard? [y/n]: " -e REMOVE
+  REMOVE=${REMOVE:-n}
+  if [[ $REMOVE == 'y' ]]; then
+    checkOS
 
-		systemctl stop "wg-quick@${SERVER_WG_NIC}"
-		systemctl disable "wg-quick@${SERVER_WG_NIC}"
+    systemctl stop "wg-quick@${SERVER_WG_NIC}"
+    systemctl disable "wg-quick@${SERVER_WG_NIC}"
 
-		if [[ ${OS} == 'ubuntu' ]]; then
-			apt-get remove -y wireguard wireguard-tools qrencode
-		elif [[ ${OS} == 'debian' ]]; then
-			apt-get remove -y wireguard wireguard-tools qrencode
-		elif [[ ${OS} == 'fedora' ]]; then
-			dnf remove -y --noautoremove wireguard-tools qrencode
-			if [[ ${VERSION_ID} -lt 32 ]]; then
-				dnf remove -y --noautoremove wireguard-dkms
-				dnf copr disable -y jdoss/wireguard
-			fi
-		elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
-			yum remove -y --noautoremove wireguard-tools
-			if [[ ${VERSION_ID} == 8* ]]; then
-				yum remove --noautoremove kmod-wireguard qrencode
-			fi
-		elif [[ ${OS} == 'oracle' ]]; then
-			yum remove --noautoremove wireguard-tools qrencode
-		elif [[ ${OS} == 'arch' ]]; then
-			pacman -Rs --noconfirm wireguard-tools qrencode
-		fi
+    if [[ ${OS} == 'ubuntu' ]]; then
+      apt-get remove -y wireguard wireguard-tools qrencode
+    elif [[ ${OS} == 'debian' ]]; then
+      apt-get remove -y wireguard wireguard-tools qrencode
+    elif [[ ${OS} == 'fedora' ]]; then
+      dnf remove -y --noautoremove wireguard-tools qrencode
+      if [[ ${VERSION_ID} -lt 32 ]]; then
+        dnf remove -y --noautoremove wireguard-dkms
+        dnf copr disable -y jdoss/wireguard
+      fi
+    elif [[ ${OS} == 'centos' ]] || [[ ${OS} == 'almalinux' ]] || [[ ${OS} == 'rocky' ]]; then
+      yum remove -y --noautoremove wireguard-tools
+      if [[ ${VERSION_ID} == 8* ]]; then
+        yum remove --noautoremove kmod-wireguard qrencode
+      fi
+    elif [[ ${OS} == 'oracle' ]]; then
+      yum remove --noautoremove wireguard-tools qrencode
+    elif [[ ${OS} == 'arch' ]]; then
+      pacman -Rs --noconfirm wireguard-tools qrencode
+    fi
 
-		rm -rf /etc/wireguard
-		rm -f /etc/sysctl.d/wg.conf
+    rm -rf /etc/wireguard
+    rm -f /etc/sysctl.d/wg.conf
 
-		# Reload sysctl
-		sysctl --system
+    # Reload sysctl
+    sysctl --system
 
-		# Check if WireGuard is running
-		systemctl is-active --quiet "wg-quick@${SERVER_WG_NIC}"
-		WG_RUNNING=$?
+    # Check if WireGuard is running
+    systemctl is-active --quiet "wg-quick@${SERVER_WG_NIC}"
+    WG_RUNNING=$?
 
-		if [[ ${WG_RUNNING} -eq 0 ]]; then
-			echo "WireGuard failed to uninstall properly."
-			exit 1
-		else
-			echo "WireGuard uninstalled successfully."
-			exit 0
-		fi
-	else
-		echo ""
-		echo "Removal aborted!"
-	fi
+    if [[ ${WG_RUNNING} -eq 0 ]]; then
+      echo "WireGuard failed to uninstall properly."
+      exit 1
+    else
+      echo "WireGuard uninstalled successfully."
+      exit 0
+    fi
+  else
+    echo ""
+    echo "Removal aborted!"
+  fi
 }
 
 function manageMenu() {
-	echo "Welcome to WireGuard-install!"
-	echo "The git repository is available at: https://github.com/angristan/wireguard-install"
-	echo ""
-	echo "It looks like WireGuard is already installed."
-	echo ""
-	echo "What do you want to do?"
-	echo "   1) Add a new user"
-	echo "   2) List all users"
-	echo "   3) Revoke existing user"
-	echo "   4) Uninstall WireGuard"
-	echo "   5) Exit"
-	until [[ ${MENU_OPTION} =~ ^[1-5]$ ]]; do
-		read -rp "Select an option [1-5]: " MENU_OPTION
-	done
-	case "${MENU_OPTION}" in
-	1)
-		newClient
-		;;
-	2)
-		listClients
-		;;
-	3)
-		revokeClient
-		;;
-	4)
-		uninstallWg
-		;;
-	5)
-		exit 0
-		;;
-	esac
+  echo "Welcome to WireGuard-install!"
+  echo "The git repository is available at: https://github.com/angristan/wireguard-install"
+  echo ""
+  echo "It looks like WireGuard is already installed."
+  echo ""
+  echo "What do you want to do?"
+  echo "   1) Add a new user"
+  echo "   2) List all users"
+  echo "   3) Revoke existing user"
+  echo "   4) Uninstall WireGuard"
+  echo "   5) Exit"
+  until [[ ${MENU_OPTION} =~ ^[1-5]$ ]]; do
+    read -rp "Select an option [1-5]: " MENU_OPTION
+  done
+  case "${MENU_OPTION}" in
+  1)
+    newClient
+    ;;
+  2)
+    listClients
+    ;;
+  3)
+    revokeClient
+    ;;
+  4)
+    uninstallWg
+    ;;
+  5)
+    exit 0
+    ;;
+  esac
 }
 
 # Check for root, virt, OS...
@@ -567,8 +567,8 @@ initialCheck
 
 # Check if WireGuard is already installed and load params
 if [[ -e /etc/wireguard/params ]]; then
-	source /etc/wireguard/params
-	manageMenu
+  source /etc/wireguard/params
+  manageMenu
 else
-	installWireGuard
+  installWireGuard
 fi