459 lines
15 KiB
Bash
Executable File
459 lines
15 KiB
Bash
Executable File
#!/bin/sh
|
|
#
|
|
# Script for automatic setup of an IPsec VPN server on Ubuntu LTS and Debian 8.
|
|
# Works on any dedicated server or Virtual Private Server (VPS) except OpenVZ.
|
|
#
|
|
# DO NOT RUN THIS SCRIPT ON YOUR PC OR MAC! THIS IS MEANT TO BE RUN
|
|
# ON A DEDICATED SERVER OR VPS!
|
|
#
|
|
# Copyright (C) 2014-2016 Lin Song <linsongui@gmail.com>
|
|
# Based on the work of Thomas Sarlandie (Copyright 2012)
|
|
#
|
|
# This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
|
|
# Unported License: http://creativecommons.org/licenses/by-sa/3.0/
|
|
#
|
|
# Attribution required: please include my name in any derivative and let me
|
|
# know how you have improved it!
|
|
|
|
# =====================================================
|
|
|
|
# Define your own values for these variables
|
|
# - IPsec pre-shared key, VPN username and password
|
|
# - All values MUST be placed inside 'single quotes'
|
|
# - DO NOT use these characters within values: \ " '
|
|
|
|
YOUR_IPSEC_PSK=''
|
|
YOUR_USERNAME=''
|
|
YOUR_PASSWORD=''
|
|
|
|
# Important notes: https://git.io/vpnnotes
|
|
# Setup VPN clients: https://git.io/vpnclients
|
|
|
|
# =====================================================
|
|
|
|
export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
|
|
|
|
exiterr() { echo "Error: ${1}" >&2; exit 1; }
|
|
exiterr2() { echo "Error: 'apt-get install' failed." >&2; exit 1; }
|
|
|
|
os_type="$(lsb_release -si 2>/dev/null)"
|
|
if [ "$os_type" != "Ubuntu" ] && [ "$os_type" != "Debian" ]; then
|
|
exiterr "This script only supports Ubuntu/Debian."
|
|
fi
|
|
|
|
if [ -f /proc/user_beancounters ]; then
|
|
exiterr "This script does not support OpenVZ VPS."
|
|
fi
|
|
|
|
if [ "$(id -u)" != 0 ]; then
|
|
exiterr "Script must be run as root. Try 'sudo sh $0'"
|
|
fi
|
|
|
|
eth0_state=$(cat /sys/class/net/eth0/operstate 2>/dev/null)
|
|
if [ -z "$eth0_state" ] || [ "$eth0_state" = "down" ]; then
|
|
cat 1>&2 <<'EOF'
|
|
Error: Network interface 'eth0' is not available.
|
|
|
|
Please DO NOT run this script on your PC or Mac!
|
|
|
|
Run 'cat /proc/net/dev' to find the active network interface,
|
|
then use it to replace ALL 'eth0' and 'eth+' in this script.
|
|
EOF
|
|
exit 1
|
|
fi
|
|
|
|
[ -n "$YOUR_IPSEC_PSK" ] && VPN_IPSEC_PSK="$YOUR_IPSEC_PSK"
|
|
[ -n "$YOUR_USERNAME" ] && VPN_USER="$YOUR_USERNAME"
|
|
[ -n "$YOUR_PASSWORD" ] && VPN_PASSWORD="$YOUR_PASSWORD"
|
|
|
|
if [ -z "$VPN_IPSEC_PSK" ] && [ -z "$VPN_USER" ] && [ -z "$VPN_PASSWORD" ]; then
|
|
echo "VPN credentials not set by user. Generating random PSK and password..."
|
|
echo
|
|
VPN_IPSEC_PSK="$(LC_CTYPE=C tr -dc 'A-HJ-NPR-Za-km-z2-9' < /dev/urandom | head -c 16)"
|
|
VPN_USER=vpnuser
|
|
VPN_PASSWORD="$(LC_CTYPE=C tr -dc 'A-HJ-NPR-Za-km-z2-9' < /dev/urandom | head -c 16)"
|
|
fi
|
|
|
|
if [ -z "$VPN_IPSEC_PSK" ] || [ -z "$VPN_USER" ] || [ -z "$VPN_PASSWORD" ]; then
|
|
exiterr "All VPN credentials must be specified. Edit the script and re-enter them."
|
|
fi
|
|
|
|
if [ "$(sed 's/\..*//' /etc/debian_version 2>/dev/null)" = "7" ]; then
|
|
cat <<'EOF'
|
|
IMPORTANT: Workaround required for Debian 7 (Wheezy).
|
|
You must first run the script at: https://git.io/vpndeb7
|
|
If not already done so, press Ctrl-C to interrupt now.
|
|
|
|
Continuing in 30 seconds ...
|
|
|
|
EOF
|
|
sleep 30
|
|
fi
|
|
|
|
echo "VPN setup in progress... Please be patient."
|
|
echo
|
|
|
|
# Create and change to working dir
|
|
mkdir -p /opt/src
|
|
cd /opt/src || exiterr "Cannot enter /opt/src."
|
|
|
|
# Update package index
|
|
export DEBIAN_FRONTEND=noninteractive
|
|
apt-get -yq update || exiterr "'apt-get update' failed."
|
|
|
|
# Make sure basic commands exist
|
|
apt-get -yq install wget dnsutils openssl || exiterr2
|
|
apt-get -yq install iproute gawk grep sed net-tools || exiterr2
|
|
|
|
cat <<'EOF'
|
|
|
|
Trying to auto discover IPs of this server...
|
|
|
|
In case the script hangs here for more than a few minutes,
|
|
use Ctrl-C to interrupt. Then edit it and manually enter IPs.
|
|
|
|
EOF
|
|
|
|
# In case auto IP discovery fails, you may manually enter server IPs here.
|
|
# If your server only has a public IP, put that public IP on both lines.
|
|
PUBLIC_IP=${VPN_PUBLIC_IP:-''}
|
|
PRIVATE_IP=${VPN_PRIVATE_IP:-''}
|
|
|
|
# In Amazon EC2, these two variables will be retrieved from metadata
|
|
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(wget -t 3 -T 15 -qO- 'http://169.254.169.254/latest/meta-data/public-ipv4')
|
|
[ -z "$PRIVATE_IP" ] && PRIVATE_IP=$(wget -t 3 -T 15 -qO- 'http://169.254.169.254/latest/meta-data/local-ipv4')
|
|
|
|
# Try to find IPs for non-EC2 servers
|
|
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(dig @resolver1.opendns.com -t A -4 myip.opendns.com +short)
|
|
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(wget -t 3 -T 15 -qO- http://whatismyip.akamai.com)
|
|
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(wget -t 3 -T 15 -qO- http://ipv4.icanhazip.com)
|
|
[ -z "$PRIVATE_IP" ] && PRIVATE_IP=$(ip -4 route get 1 | awk '{print $NF;exit}')
|
|
[ -z "$PRIVATE_IP" ] && PRIVATE_IP=$(ifconfig eth0 | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*')
|
|
|
|
# Check IPs for correct format
|
|
IP_REGEX="^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$"
|
|
if ! printf %s "$PUBLIC_IP" | grep -Eq "$IP_REGEX"; then
|
|
exiterr "Cannot find valid public IP. Edit the script and manually enter IPs."
|
|
fi
|
|
if ! printf %s "$PRIVATE_IP" | grep -Eq "$IP_REGEX"; then
|
|
exiterr "Cannot find valid private IP. Edit the script and manually enter IPs."
|
|
fi
|
|
|
|
# Install necessary packages
|
|
apt-get -yq install libnss3-dev libnspr4-dev pkg-config libpam0g-dev \
|
|
libcap-ng-dev libcap-ng-utils libselinux1-dev \
|
|
libcurl4-nss-dev flex bison gcc make \
|
|
libunbound-dev libnss3-tools libevent-dev || exiterr2
|
|
apt-get -yq --no-install-recommends install xmlto || exiterr2
|
|
apt-get -yq install ppp xl2tpd || exiterr2
|
|
|
|
# Install Fail2Ban to protect SSH server
|
|
apt-get -yq install fail2ban || exiterr2
|
|
|
|
# Compile and install Libreswan
|
|
swan_ver=3.18
|
|
swan_file="libreswan-$swan_ver.tar.gz"
|
|
swan_url1="https://download.libreswan.org/$swan_file"
|
|
swan_url2="https://github.com/libreswan/libreswan/archive/v$swan_ver.tar.gz"
|
|
wget -t 3 -T 30 -nv -O "$swan_file" "$swan_url1" || wget -t 3 -T 30 -nv -O "$swan_file" "$swan_url2"
|
|
[ "$?" != "0" ] && exiterr "Cannot download Libreswan source."
|
|
/bin/rm -rf "/opt/src/libreswan-$swan_ver"
|
|
tar xzf "$swan_file" && /bin/rm -f "$swan_file"
|
|
cd "libreswan-$swan_ver" || exiterr "Cannot enter Libreswan source dir."
|
|
echo "WERROR_CFLAGS =" > Makefile.inc.local
|
|
if [ "$(packaging/utils/lswan_detect.sh init)" = "systemd" ]; then
|
|
apt-get -yq install libsystemd-dev || exiterr2
|
|
fi
|
|
make -s programs && make -s install
|
|
|
|
# Verify the install and clean up
|
|
cd /opt/src || exiterr "Cannot enter /opt/src."
|
|
/bin/rm -rf "/opt/src/libreswan-$swan_ver"
|
|
/usr/local/sbin/ipsec --version 2>/dev/null | grep -qs "$swan_ver"
|
|
[ "$?" != "0" ] && exiterr "Libreswan $swan_ver failed to build."
|
|
|
|
# Create IPsec (Libreswan) config
|
|
sys_dt="$(date +%Y-%m-%d-%H:%M:%S)"
|
|
/bin/cp -f /etc/ipsec.conf "/etc/ipsec.conf.old-$sys_dt" 2>/dev/null
|
|
cat > /etc/ipsec.conf <<EOF
|
|
version 2.0
|
|
|
|
config setup
|
|
nat_traversal=yes
|
|
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!192.168.42.0/23
|
|
protostack=netkey
|
|
nhelpers=0
|
|
interfaces=%defaultroute
|
|
uniqueids=no
|
|
|
|
conn shared
|
|
left=$PRIVATE_IP
|
|
leftid=$PUBLIC_IP
|
|
right=%any
|
|
forceencaps=yes
|
|
authby=secret
|
|
pfs=no
|
|
rekey=no
|
|
keyingtries=5
|
|
dpddelay=30
|
|
dpdtimeout=120
|
|
dpdaction=clear
|
|
ike=3des-sha1,aes-sha1
|
|
phase2alg=3des-sha1,aes-sha1
|
|
|
|
conn l2tp-psk
|
|
auto=add
|
|
leftsubnet=$PRIVATE_IP/32
|
|
leftnexthop=%defaultroute
|
|
leftprotoport=17/1701
|
|
rightprotoport=17/%any
|
|
type=transport
|
|
auth=esp
|
|
also=shared
|
|
|
|
conn xauth-psk
|
|
auto=add
|
|
leftsubnet=0.0.0.0/0
|
|
rightaddresspool=192.168.43.10-192.168.43.250
|
|
modecfgdns1=8.8.8.8
|
|
modecfgdns2=8.8.4.4
|
|
leftxauthserver=yes
|
|
rightxauthclient=yes
|
|
leftmodecfgserver=yes
|
|
rightmodecfgclient=yes
|
|
modecfgpull=yes
|
|
xauthby=file
|
|
ike-frag=yes
|
|
ikev2=never
|
|
cisco-unity=yes
|
|
also=shared
|
|
EOF
|
|
|
|
# Specify IPsec PSK
|
|
/bin/cp -f /etc/ipsec.secrets "/etc/ipsec.secrets.old-$sys_dt" 2>/dev/null
|
|
cat > /etc/ipsec.secrets <<EOF
|
|
$PUBLIC_IP %any : PSK "$VPN_IPSEC_PSK"
|
|
EOF
|
|
|
|
# Create xl2tpd config
|
|
/bin/cp -f /etc/xl2tpd/xl2tpd.conf "/etc/xl2tpd/xl2tpd.conf.old-$sys_dt" 2>/dev/null
|
|
cat > /etc/xl2tpd/xl2tpd.conf <<'EOF'
|
|
[global]
|
|
port = 1701
|
|
|
|
[lns default]
|
|
ip range = 192.168.42.10-192.168.42.250
|
|
local ip = 192.168.42.1
|
|
require chap = yes
|
|
refuse pap = yes
|
|
require authentication = yes
|
|
name = l2tpd
|
|
pppoptfile = /etc/ppp/options.xl2tpd
|
|
length bit = yes
|
|
EOF
|
|
|
|
# Set xl2tpd options
|
|
/bin/cp -f /etc/ppp/options.xl2tpd "/etc/ppp/options.xl2tpd.old-$sys_dt" 2>/dev/null
|
|
cat > /etc/ppp/options.xl2tpd <<'EOF'
|
|
ipcp-accept-local
|
|
ipcp-accept-remote
|
|
ms-dns 8.8.8.8
|
|
ms-dns 8.8.4.4
|
|
noccp
|
|
auth
|
|
crtscts
|
|
mtu 1280
|
|
mru 1280
|
|
lock
|
|
proxyarp
|
|
lcp-echo-failure 4
|
|
lcp-echo-interval 30
|
|
connect-delay 5000
|
|
EOF
|
|
|
|
# Create VPN credentials
|
|
/bin/cp -f /etc/ppp/chap-secrets "/etc/ppp/chap-secrets.old-$sys_dt" 2>/dev/null
|
|
cat > /etc/ppp/chap-secrets <<EOF
|
|
# Secrets for authentication using CHAP
|
|
# client server secret IP addresses
|
|
"$VPN_USER" l2tpd "$VPN_PASSWORD" *
|
|
EOF
|
|
|
|
/bin/cp -f /etc/ipsec.d/passwd "/etc/ipsec.d/passwd.old-$sys_dt" 2>/dev/null
|
|
VPN_PASSWORD_ENC=$(openssl passwd -1 "$VPN_PASSWORD")
|
|
cat > /etc/ipsec.d/passwd <<EOF
|
|
$VPN_USER:$VPN_PASSWORD_ENC:xauth-psk
|
|
EOF
|
|
|
|
# Update sysctl settings
|
|
if ! grep -qs "hwdsl2 VPN script" /etc/sysctl.conf; then
|
|
/bin/cp -f /etc/sysctl.conf "/etc/sysctl.conf.old-$sys_dt" 2>/dev/null
|
|
cat >> /etc/sysctl.conf <<'EOF'
|
|
|
|
# Added by hwdsl2 VPN script
|
|
kernel.msgmnb = 65536
|
|
kernel.msgmax = 65536
|
|
kernel.shmmax = 68719476736
|
|
kernel.shmall = 4294967296
|
|
|
|
net.ipv4.ip_forward = 1
|
|
net.ipv4.tcp_syncookies = 1
|
|
net.ipv4.conf.all.accept_source_route = 0
|
|
net.ipv4.conf.default.accept_source_route = 0
|
|
net.ipv4.conf.all.accept_redirects = 0
|
|
net.ipv4.conf.default.accept_redirects = 0
|
|
net.ipv4.conf.all.send_redirects = 0
|
|
net.ipv4.conf.default.send_redirects = 0
|
|
net.ipv4.conf.lo.send_redirects = 0
|
|
net.ipv4.conf.eth0.send_redirects = 0
|
|
net.ipv4.conf.all.rp_filter = 0
|
|
net.ipv4.conf.default.rp_filter = 0
|
|
net.ipv4.conf.lo.rp_filter = 0
|
|
net.ipv4.conf.eth0.rp_filter = 0
|
|
net.ipv4.icmp_echo_ignore_broadcasts = 1
|
|
net.ipv4.icmp_ignore_bogus_error_responses = 1
|
|
|
|
net.core.wmem_max = 12582912
|
|
net.core.rmem_max = 12582912
|
|
net.ipv4.tcp_rmem = 10240 87380 12582912
|
|
net.ipv4.tcp_wmem = 10240 87380 12582912
|
|
EOF
|
|
fi
|
|
|
|
# Create basic IPTables rules. First check for existing rules.
|
|
# - If IPTables is "empty", simply write out the new rules.
|
|
# - If *not* empty, insert new rules and save them with existing ones.
|
|
if ! grep -qs "hwdsl2 VPN script" /etc/iptables.rules; then
|
|
service fail2ban stop >/dev/null 2>&1
|
|
iptables-save > "/etc/iptables.rules.old-$sys_dt"
|
|
sshd_port="$(ss -nlput | grep sshd | awk '{print $5}' | head -n 1 | grep -Eo '[0-9]{1,5}$')"
|
|
if [ "$(iptables-save | grep -c '^\-')" = "0" ] && [ "$sshd_port" = "22" ]; then
|
|
cat > /etc/iptables.rules <<EOF
|
|
# Added by hwdsl2 VPN script
|
|
*filter
|
|
:INPUT ACCEPT [0:0]
|
|
:FORWARD ACCEPT [0:0]
|
|
:OUTPUT ACCEPT [0:0]
|
|
-A INPUT -m conntrack --ctstate INVALID -j DROP
|
|
-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
|
|
-A INPUT -i lo -j ACCEPT
|
|
-A INPUT -d 127.0.0.0/8 -j REJECT
|
|
-A INPUT -p icmp -j ACCEPT
|
|
-A INPUT -p udp --dport 67:68 --sport 67:68 -j ACCEPT
|
|
-A INPUT -p tcp --dport 22 -j ACCEPT
|
|
-A INPUT -p udp -m multiport --dports 500,4500 -j ACCEPT
|
|
-A INPUT -p udp --dport 1701 -m policy --dir in --pol ipsec -j ACCEPT
|
|
-A INPUT -p udp --dport 1701 -j DROP
|
|
-A INPUT -j DROP
|
|
-A FORWARD -m conntrack --ctstate INVALID -j DROP
|
|
# Uncomment to DROP traffic between VPN clients themselves
|
|
# -A FORWARD -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j DROP
|
|
# -A FORWARD -s 192.168.43.0/24 -d 192.168.43.0/24 -j DROP
|
|
-A FORWARD -i eth+ -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
|
|
-A FORWARD -i ppp+ -o eth+ -j ACCEPT
|
|
-A FORWARD -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j ACCEPT
|
|
-A FORWARD -i eth+ -d 192.168.43.0/24 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
|
|
-A FORWARD -s 192.168.43.0/24 -o eth+ -j ACCEPT
|
|
-A FORWARD -j DROP
|
|
COMMIT
|
|
*nat
|
|
:PREROUTING ACCEPT [0:0]
|
|
:INPUT ACCEPT [0:0]
|
|
:OUTPUT ACCEPT [0:0]
|
|
:POSTROUTING ACCEPT [0:0]
|
|
-A POSTROUTING -s 192.168.42.0/24 -o eth+ -j SNAT --to-source $PRIVATE_IP
|
|
-A POSTROUTING -s 192.168.43.0/24 -o eth+ -m policy --dir out --pol none -j SNAT --to-source $PRIVATE_IP
|
|
COMMIT
|
|
EOF
|
|
else
|
|
iptables -I INPUT 1 -p udp -m multiport --dports 500,4500 -j ACCEPT
|
|
iptables -I INPUT 2 -p udp --dport 1701 -m policy --dir in --pol ipsec -j ACCEPT
|
|
iptables -I INPUT 3 -p udp --dport 1701 -j DROP
|
|
iptables -I FORWARD 1 -m conntrack --ctstate INVALID -j DROP
|
|
iptables -I FORWARD 2 -i eth+ -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
|
|
iptables -I FORWARD 3 -i ppp+ -o eth+ -j ACCEPT
|
|
iptables -I FORWARD 4 -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j ACCEPT
|
|
iptables -I FORWARD 5 -i eth+ -d 192.168.43.0/24 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
|
|
iptables -I FORWARD 6 -s 192.168.43.0/24 -o eth+ -j ACCEPT
|
|
# Uncomment to DROP traffic between VPN clients themselves
|
|
# iptables -I FORWARD 2 -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j DROP
|
|
# iptables -I FORWARD 3 -s 192.168.43.0/24 -d 192.168.43.0/24 -j DROP
|
|
iptables -A FORWARD -j DROP
|
|
iptables -t nat -I POSTROUTING -s 192.168.43.0/24 -o eth+ -m policy --dir out --pol none -j SNAT --to-source "$PRIVATE_IP"
|
|
iptables -t nat -I POSTROUTING -s 192.168.42.0/24 -o eth+ -j SNAT --to-source "$PRIVATE_IP"
|
|
echo "# Modified by hwdsl2 VPN script" > /etc/iptables.rules
|
|
iptables-save >> /etc/iptables.rules
|
|
fi
|
|
# Update rules for iptables-persistent
|
|
if [ -f /etc/iptables/rules.v4 ]; then
|
|
/bin/cp -f /etc/iptables/rules.v4 "/etc/iptables/rules.v4.old-$sys_dt"
|
|
/bin/cp -f /etc/iptables.rules /etc/iptables/rules.v4
|
|
fi
|
|
fi
|
|
|
|
# Load IPTables rules at system boot
|
|
mkdir -p /etc/network/if-pre-up.d
|
|
cat > /etc/network/if-pre-up.d/iptablesload <<'EOF'
|
|
#!/bin/sh
|
|
iptables-restore < /etc/iptables.rules
|
|
exit 0
|
|
EOF
|
|
|
|
# Start services at boot
|
|
if ! grep -qs "hwdsl2 VPN script" /etc/rc.local; then
|
|
/bin/cp -f /etc/rc.local "/etc/rc.local.old-$sys_dt" 2>/dev/null
|
|
sed --follow-symlinks -i -e '/^exit 0/d' /etc/rc.local
|
|
cat >> /etc/rc.local <<'EOF'
|
|
|
|
# Added by hwdsl2 VPN script
|
|
service fail2ban restart || /bin/true
|
|
service ipsec start
|
|
service xl2tpd start
|
|
echo 1 > /proc/sys/net/ipv4/ip_forward
|
|
exit 0
|
|
EOF
|
|
fi
|
|
|
|
# Reload sysctl.conf
|
|
sysctl -e -q -p
|
|
|
|
# Update file attributes
|
|
chmod +x /etc/rc.local
|
|
chmod +x /etc/network/if-pre-up.d/iptablesload
|
|
chmod 600 /etc/ipsec.secrets* /etc/ppp/chap-secrets* /etc/ipsec.d/passwd*
|
|
|
|
# Apply new IPTables rules
|
|
iptables-restore < /etc/iptables.rules
|
|
|
|
# Restart services
|
|
service fail2ban stop >/dev/null 2>&1
|
|
service ipsec stop >/dev/null 2>&1
|
|
service xl2tpd stop >/dev/null 2>&1
|
|
service fail2ban start
|
|
service ipsec start
|
|
service xl2tpd start
|
|
|
|
cat <<EOF
|
|
|
|
================================================
|
|
|
|
IPsec VPN server is now ready for use!
|
|
|
|
Connect to your new VPN with these details:
|
|
|
|
Server IP: $PUBLIC_IP
|
|
IPsec PSK: $VPN_IPSEC_PSK
|
|
Username: $VPN_USER
|
|
Password: $VPN_PASSWORD
|
|
|
|
Write these down. You'll need them to connect!
|
|
|
|
Important notes: https://git.io/vpnnotes
|
|
Setup VPN clients: https://git.io/vpnclients
|
|
|
|
================================================
|
|
|
|
EOF
|
|
|
|
exit 0
|