119 lines
7.8 KiB
Markdown
119 lines
7.8 KiB
Markdown
## Configure IPsec/XAuth VPN Clients
|
|
|
|
*Read this in other languages: [English](clients-xauth.md), [简体中文](clients-xauth-zh.md).*
|
|
|
|
*To connect using IPsec/L2TP mode, see: [Configure IPsec/L2TP VPN Clients](clients.md)*
|
|
|
|
After <a href="https://github.com/hwdsl2/setup-ipsec-vpn" target="_blank">setting up your own VPN server</a>, follow these steps to configure your devices. IPsec/XAuth ("Cisco IPsec") is natively supported by Android, iOS and OS X. There is no additional software to install. Windows users can use the free <a href="https://www.shrew.net/download/vpn" target="_blank">Shrew Soft client</a>. In case you are unable to connect, first check to make sure the VPN credentials were entered correctly.
|
|
|
|
`IPsec/XAuth` mode is also called "Cisco IPsec". Compared to `IPsec/L2TP`, it is generally faster with less overhead.
|
|
|
|
---
|
|
* Platforms
|
|
* [Windows](#windows)
|
|
* [OS X (macOS)](#os-x)
|
|
* [Android](#android)
|
|
* [iOS (iPhone/iPad)](#ios)
|
|
|
|
### Windows ###
|
|
|
|
**Note:** You can also connect using [IPsec/L2TP mode](clients.md). No additional software is required.
|
|
|
|
1. Download and install the free <a href="https://www.shrew.net/download/vpn" target="_blank">Shrew Soft VPN client</a>.
|
|
1. Click Start Menu -> All Programs -> ShrewSoft VPN Client -> VPN Access Manager
|
|
1. Click the **Add (+)** button on toolbar.
|
|
1. Enter `Your VPN Server IP` in the **Host Name or IP Address** field.
|
|
1. Click the **Authentication** tab. Select **Mutual PSK + XAuth** from the **Authentication Method** drop-down menu.
|
|
1. Click the **Credentials** tab below. Enter `Your VPN IPsec PSK` in the **Pre Shared Key** field.
|
|
1. Click the **Phase 1** tab. Select **main** from the **Exchange Type** drop-down menu.
|
|
1. Click the **Phase 2** tab. Select **sha1** from the **HMAC Algorithm** drop-down menu.
|
|
1. Click **Save** to save the VPN connection details.
|
|
1. Select the new VPN connection. Click the **Connect** button on toolbar.
|
|
1. Enter `Your VPN Username` in the **Username** field.
|
|
1. Enter `Your VPN Password` in the **Password** field.
|
|
1. Click **Connect**.
|
|
|
|
Once connected, you will see **tunnel enabled** in the VPN Connect status window. Click the "Network" tab, and confirm that **Established - 1** is displayed under "Security Associations". You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
**Note:** This <a href="https://documentation.meraki.com/MX-Z/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_809" target="_blank">one-time registry change</a> is required if the VPN server and/or client is behind NAT (e.g. home router). Refer to the linked web page, or run the following from an <a href="http://www.winhelponline.com/blog/open-elevated-command-prompt-windows/" target="_blank">elevated command prompt</a>. You must reboot your computer when finished.
|
|
- For Windows Vista, 7, 8 and 10
|
|
```console
|
|
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
|
|
```
|
|
|
|
- For Windows XP ONLY
|
|
```console
|
|
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\IPSec /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
|
|
```
|
|
|
|
### OS X ###
|
|
1. Open System Preferences and go to the Network section.
|
|
1. Click the **+** button in the lower-left corner of the window.
|
|
1. Select **VPN** from the **Interface** drop-down menu.
|
|
1. Select **Cisco IPSec** from the **VPN Type** drop-down menu.
|
|
1. Enter anything you like for the **Service Name**.
|
|
1. Click **Create**.
|
|
1. Enter `Your VPN Server IP` for the **Server Address**.
|
|
1. Enter `Your VPN Username` for the **Account Name**.
|
|
1. Enter `Your VPN Password` for the **Password**.
|
|
1. Click the **Authentication Settings** button.
|
|
1. In the **Machine Authentication** section, select the **Shared Secret** radio button and enter `Your VPN IPsec PSK`.
|
|
1. Leave the **Group Name** field blank.
|
|
1. Click **OK**.
|
|
1. Check the **Show VPN status in menu bar** checkbox.
|
|
1. Click **Apply** to save the VPN connection information.
|
|
|
|
To connect to the VPN: Use the menu bar icon, or go to the Network section of System Preferences, select the VPN and choose **Connect**. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
### Android ###
|
|
1. Launch the **Settings** application.
|
|
1. Tap **More...** in the **Wireless & Networks** section.
|
|
1. Tap **VPN**.
|
|
1. Tap **Add VPN Profile** or the **+** icon at top-right of screen.
|
|
1. Enter anything you like in the **Name** field.
|
|
1. Select **IPSec Xauth PSK** in the **Type** drop-down menu.
|
|
1. Enter `Your VPN Server IP` in the **Server address** field.
|
|
1. Leave the **IPSec identifier** field blank.
|
|
1. Enter `Your VPN IPsec PSK` in the **IPSec pre-shared key** field.
|
|
1. Tap **Save**.
|
|
1. Tap the new VPN connection.
|
|
1. Enter `Your VPN Username` in the **Username** field.
|
|
1. Enter `Your VPN Password` in the **Password** field.
|
|
1. Check the **Save account information** checkbox.
|
|
1. Tap **Connect**.
|
|
|
|
**Note:** If you are using Android 6 (Marshmallow) and unable to connect, try these workarounds:
|
|
|
|
1. Click the settings icon next to your VPN profile. Select "Show Advanced Options" and scroll down to the bottom. If the option "Backwards-compatible mode" exists, enable it and reconnect the VPN. If not, skip to the next step.
|
|
1. Edit `/etc/ipsec.conf` on the VPN server and append `,aes256-sha2_256` to both `ike=` and `phase2alg=` lines. Then add a new line `sha2-truncbug=yes`. Indent lines with two spaces. Save the file and run `service ipsec restart`. (<a href="https://libreswan.org/wiki/FAQ#Android_6.0_connection_comes_up_but_no_packet_flow" target="_blank">Ref</a>)
|
|
|
|
Once connected, you will see a VPN icon in the notification bar. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
### iOS ###
|
|
1. Go to Settings -> General -> VPN.
|
|
1. Tap **Add VPN Configuration...**.
|
|
1. Tap **Type**. Select **IPSec** and go back.
|
|
1. Tap **Description** and enter anything you like.
|
|
1. Tap **Server** and enter `Your VPN Server IP`.
|
|
1. Tap **Account** and enter `Your VPN Username`.
|
|
1. Tap **Password** and enter `Your VPN Password`.
|
|
1. Leave the **Group Name** field blank.
|
|
1. Tap **Secret** and enter `Your VPN IPsec PSK`.
|
|
1. Tap **Done**.
|
|
1. Slide the **VPN** switch ON.
|
|
|
|
Once connected, you will see a VPN icon in the status bar. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
## Credits
|
|
|
|
This document was adapted from the <a href="https://github.com/jlund/streisand" target="_blank">Streisand</a> project by Joshua Lund and contributors.
|
|
|
|
## License
|
|
|
|
Copyright (C) 2016 Lin Song
|
|
Based on <a href="https://github.com/jlund/streisand/blob/master/playbooks/roles/l2tp-ipsec/templates/instructions.md.j2" target="_blank">the work of Joshua Lund</a> (Copyright 2014-2016)
|
|
|
|
This program is free software: you can redistribute it and/or modify it under the terms of the <a href="https://www.gnu.org/licenses/gpl.html" target="_blank">GNU General Public License</a> as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
|