162 lines
10 KiB
Markdown
162 lines
10 KiB
Markdown
## Configure IPsec/L2TP VPN Clients
|
|
|
|
*Read this in other languages: [English](clients.md), [简体中文](clients-zh.md).*
|
|
|
|
*To connect using IPsec/XAuth mode, see: [Configure IPsec/XAuth VPN Clients](clients-xauth.md)*
|
|
|
|
After <a href="https://github.com/hwdsl2/setup-ipsec-vpn" target="_blank">setting up your own VPN server</a>, follow these steps to configure your devices. IPsec/L2TP is natively supported by Android, iOS, OS X, and Windows. There is no additional software to install. Setup should only take a few minutes. In case you are unable to connect, first check to make sure the VPN credentials were entered correctly.
|
|
|
|
---
|
|
* Platforms
|
|
* [Windows](#windows)
|
|
* [OS X](#os-x)
|
|
* [Android](#android)
|
|
* [iOS](#ios)
|
|
* [Chromebook](#chromebook)
|
|
|
|
### Windows ###
|
|
|
|
**Windows 10 and 8.x:**
|
|
|
|
1. Right-click on the wireless/network icon in your system tray.
|
|
1. Select **Open Network and Sharing Center**.
|
|
1. Click **Set up a new connection or network**.
|
|
1. Select **Connect to a workplace** and click **Next**.
|
|
1. Click **Use my Internet connection (VPN)**.
|
|
1. Enter `Your VPN Server IP` in the **Internet address** field.
|
|
1. Enter anything you like in the **Destination name** field, and then click **Create**.
|
|
1. Right-click on the wireless/network icon in your system tray, select **Open Network and Sharing Center**.
|
|
1. On the left, click **Change adapter settings**. Right-click on the new VPN entry and choose **Properties**.
|
|
1. Click the **Security** tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the **Type of VPN**.
|
|
1. Click **Allow these protocols**. Select "Challenge Handshake Authentication Protocol (CHAP)" and deselect others.
|
|
1. Click the **Advanced settings** button.
|
|
1. Select **Use preshared key for authentication** and enter `Your VPN IPsec PSK` for the **Key**.
|
|
1. Click **OK** to close the **Advanced settings**.
|
|
1. Click **OK** to save the VPN connection details.
|
|
|
|
**Note:** A one-time registry change is required before connecting. See notes below.
|
|
|
|
**Windows 7, Vista and XP:**
|
|
|
|
1. Click on the Start Menu and go to the Control Panel.
|
|
1. Go to the **Network and Internet** section.
|
|
1. Click **Network and Sharing Center**.
|
|
1. Click **Set up a new connection or network**.
|
|
1. Select **Connect to a workplace** and click **Next**.
|
|
1. Click **Use my Internet connection (VPN)**.
|
|
1. Enter `Your VPN Server IP` in the **Internet address** field.
|
|
1. Enter anything you like in the **Destination name** field.
|
|
1. Check the **Don't connect now; just set it up so I can connect later** checkbox.
|
|
1. Click **Next**.
|
|
1. Enter `Your VPN Username` in the **User name** field.
|
|
1. Enter `Your VPN Password` in the **Password** field.
|
|
1. Check the **Remember this password** checkbox.
|
|
1. Click **Create**, and then **Close**.
|
|
1. Right-click on the wireless/network icon in your system tray, select **Open Network and Sharing Center**.
|
|
1. On the left, click **Change adapter settings**. Right-click on the new VPN entry and choose **Properties**.
|
|
1. Click the **Options** tab and uncheck **Include Windows logon domain**.
|
|
1. Click the **Security** tab. Select "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)" for the **Type of VPN**.
|
|
1. Click **Allow these protocols**. Select "Challenge Handshake Authentication Protocol (CHAP)" and deselect others.
|
|
1. Click the **Advanced settings** button.
|
|
1. Select **Use preshared key for authentication** and enter `Your VPN IPsec PSK` for the **Key**.
|
|
1. Click **OK** to close the **Advanced settings**.
|
|
1. Click **OK** to save the VPN connection details.
|
|
|
|
<a id="regkey"></a>
|
|
To connect to the VPN: Click on the wireless/network icon in your system tray, select the new VPN entry, and click **Connect**. If prompted, enter `Your VPN Username` and `Password`, then click **OK**. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
**Note:** A <a href="https://documentation.meraki.com/MX-Z/Client_VPN/Troubleshooting_Client_VPN#Windows_Error_809" target="_blank">one-time registry change</a> is required if the VPN server and/or client is behind NAT (e.g. home router). Please refer to the linked page, or run the following from an <a href="http://windows.microsoft.com/en-us/windows/command-prompt-faq#1TC=windows-7" target="_blank">elevated command prompt</a>. You must reboot your computer when done.
|
|
- For Windows Vista and newer
|
|
```console
|
|
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\PolicyAgent /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
|
|
```
|
|
|
|
- For Windows XP only
|
|
```console
|
|
REG ADD HKLM\SYSTEM\CurrentControlSet\Services\IPSec /v AssumeUDPEncapsulationContextOnSendRule /t REG_DWORD /d 0x2 /f
|
|
```
|
|
|
|
### OS X ###
|
|
1. Open System Preferences and go to the Network section.
|
|
1. Click the **+** button in the lower-left corner of the window.
|
|
1. Select **VPN** from the **Interface** drop-down menu.
|
|
1. Select **L2TP over IPSec** from the **VPN Type** drop-down menu.
|
|
1. Enter anything you like for the **Service Name**.
|
|
1. Click **Create**.
|
|
1. Enter `Your VPN Server IP` for the **Server Address**.
|
|
1. Enter `Your VPN Username` for the **Account Name**.
|
|
1. Click the **Authentication Settings** button.
|
|
1. In the **User Authentication** section, select the **Password** radio button and enter `Your VPN Password` as its value.
|
|
1. In the **Machine Authentication** section, select the **Shared Secret** radio button and enter `Your VPN IPsec PSK` as its value.
|
|
1. Click **OK**.
|
|
1. Check the **Show VPN status in menu bar** checkbox.
|
|
1. Click the **Advanced** button and make sure the **Send all traffic over VPN connection** checkbox is selected.
|
|
1. Click the **TCP/IP** tab, and make sure **Link-local only** is selected in the **Configure IPv6** section.
|
|
1. Click **OK** to close the Advanced settings, and then click **Apply** to save the VPN connection information.
|
|
|
|
You can connect to the VPN using the VPN icon in the menu bar, or by selecting the VPN in the Network section of System Preferences and choosing **Connect**. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
### Android ###
|
|
1. Launch the **Settings** application.
|
|
1. Tap **More...** in the **Wireless & Networks** section.
|
|
1. Tap **VPN**.
|
|
1. Tap **Add VPN Profile** or the **+** icon at top-right of screen.
|
|
1. Enter anything you like in the **Name** field.
|
|
1. Select **L2TP/IPSec PSK** in the **Type** drop-down menu.
|
|
1. Enter `Your VPN Server IP` in the **Server address** field.
|
|
1. Enter `Your VPN IPsec PSK` in the **IPSec pre-shared key** field.
|
|
1. Tap **Save**.
|
|
1. Tap the new VPN connection.
|
|
1. Enter `Your VPN Username` in the **Username** field.
|
|
1. Enter `Your VPN Password` in the **Password** field.
|
|
1. Check the **Save account information** checkbox.
|
|
1. Tap **Connect**.
|
|
|
|
Note for Android 6 (Marshmallow) users: On the VPN server, edit `/etc/ipsec.conf` and append `,aes256-sha2_256` to both `ike=` and `phase2alg=` lines. Then add a new line `sha2-truncbug=yes` under section `conn shared` (<a href="https://libreswan.org/wiki/FAQ#Android_6.0_connection_comes_up_but_no_packet_flow" target="_blank">Reference</a>). Indent lines with two spaces. When finished, run `service ipsec restart`.
|
|
|
|
Once connected, you will see a VPN icon in the notification bar. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
### iOS ###
|
|
1. Go to Settings -> General -> VPN.
|
|
1. Tap **Add VPN Configuration...**.
|
|
1. Tap **Type**. Select **L2TP** and go back.
|
|
1. Tap **Description** and enter anything you like.
|
|
1. Tap **Server** and enter `Your VPN Server IP`.
|
|
1. Tap **Account** and enter `Your VPN Username`.
|
|
1. Tap **Password** and enter `Your VPN Password`.
|
|
1. Tap **Secret** and enter `Your VPN IPsec PSK`.
|
|
1. Make sure the **Send All Traffic** switch is ON.
|
|
1. Tap **Done**.
|
|
1. Slide the **VPN** switch ON.
|
|
|
|
Once connected, you will see a VPN icon in the status bar. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
### Chromebook ###
|
|
1. If you haven't already, sign in to your Chromebook.
|
|
1. Click the status area, where your account picture appears.
|
|
1. Click **Settings**.
|
|
1. In the **Internet connection** section, click **Add connection**.
|
|
1. Click **Add OpenVPN / L2TP**.
|
|
1. Enter `Your VPN Server IP` for the **Server hostname**.
|
|
1. Enter anything you like for the **Service name**.
|
|
1. Make sure **Provider type** is **L2TP/IPSec + pre-shared key**.
|
|
1. Enter `Your VPN IPsec PSK` for the **Pre-shared key**.
|
|
1. Enter `Your VPN Username` for the **Username**.
|
|
1. Enter `Your VPN Password` for the **Password**.
|
|
1. Click **Connect**.
|
|
|
|
Once connected, you will see a VPN icon overlay on the network status icon. You can verify that your traffic is being routed properly by <a href="https://encrypted.google.com/search?q=my+ip" target="_blank">looking up your IP address on Google</a>. It should say "Your public IP address is `Your VPN Server IP`".
|
|
|
|
## Credits
|
|
|
|
This document was adapted from the <a href="https://github.com/jlund/streisand" target="_blank">Streisand</a> project by Joshua Lund and contributors.
|
|
|
|
## License
|
|
|
|
Copyright (C) 2016 Lin Song
|
|
Based on <a href="https://github.com/jlund/streisand/blob/master/playbooks/roles/l2tp-ipsec/templates/instructions.md.j2" target="_blank">the work of Joshua Lund</a> (Copyright 2014-2016)
|
|
|
|
This program is free software: you can redistribute it and/or modify it under the terms of the <a href="https://www.gnu.org/licenses/gpl.html" target="_blank">GNU General Public License</a> as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
|