mirror/setup-ipsec-vpn
1
0
Fork 0
mirror of synced 2024-11-29 08:06:04 +03:00
Code Issues Projects Releases Wiki Activity
7f3b94308d
setup-ipsec-vpn/vpnsetup_centos.sh
hwdsl2 d82d6d00b3 Update comments in the VPN scripts
2016-01-17 17:05:35 -06:00

443 lines
15 KiB
Bash
Raw Blame History

#!/bin/sh
#
# Script for automatic configuration of IPsec/L2TP VPN server on 64-bit CentOS/RHEL 6 & 7.
# Works on dedicated servers or any KVM- or XEN-based Virtual Private Server (VPS).
# It can also be used as the Amazon EC2 "user-data" with the official CentOS 6 and 7 AMIs.
#
# DO NOT RUN THIS SCRIPT ON YOUR PC OR MAC! THIS IS MEANT TO BE RUN
# ON YOUR DEDICATED SERVER OR VPS!
#
# Copyright (C) 2015 Lin Song
# Based on the work of Thomas Sarlandie (Copyright 2012)
#
# This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
# Unported License: http://creativecommons.org/licenses/by-sa/3.0/
#
# Attribution required: please include my name in any derivative and let me
# know how you have improved it!
if [ "$(uname)" = "Darwin" ]; then
echo 'DO NOT run this script on your Mac! It should only be run on a Dedicated Server / VPS'
echo 'or a newly-created EC2 instance, after you have modified it to set the variables below.'
exit 1
fi
# Please define your own values for these variables
# Escape *all* non-alphanumeric characters with a backslash (or 3 backslashes for \ and ").
# Examples: \ --> \\\\, " --> \\\", ' --> \', $ --> \$, ` --> \`, [space] --> \[space]
IPSEC_PSK=your_very_secure_key
VPN_USER=your_username
VPN_PASSWORD=your_very_secure_password
# IMPORTANT: Be sure to read important notes at the URL below:
# https://github.com/hwdsl2/setup-ipsec-vpn#important-notes
if [ ! -f /etc/redhat-release ]; then
echo "Looks like you aren't running this script on a CentOS/RHEL system."
exit 1
fi
if ! grep -qs -e "release 6" -e "release 7" /etc/redhat-release; then
echo "Sorry, this script only supports versions 6 and 7 of CentOS/RHEL."
exit 1
fi
if [ "$(uname -m)" != "x86_64" ]; then
echo "Sorry, this script only supports 64-bit CentOS/RHEL."
exit 1
fi
if [ -f "/proc/user_beancounters" ]; then
echo "Sorry, this script does NOT support OpenVZ VPS. Try Nyr's OpenVPN script instead:"
echo "https://github.com/Nyr/openvpn-install"
exit 1
fi
if [ "$(id -u)" != 0 ]; then
echo "Sorry, you need to run this script as root."
exit 1
fi
# Check for empty VPN variables
if [ -z "$IPSEC_PSK" ] || [ -z "$VPN_USER" ] || [ -z "$VPN_PASSWORD" ]; then
echo "Sorry, the VPN credentials cannot be empty. Please re-edit the VPN script."
exit 1
fi
# Create and change to working dir
mkdir -p /opt/src
cd /opt/src || { echo "Failed to change working directory to /opt/src. Aborting."; exit 1; }
# Install wget, dig (bind-utils) and nano
yum -y install wget bind-utils nano
echo
echo 'Please wait... Trying to find Public/Private IP of this server.'
echo
echo 'If the script hangs here for more than a few minutes, press Ctrl-C to interrupt,'
echo 'then edit and comment out the next two lines PUBLIC_IP= and PRIVATE_IP=, or replace'
echo 'them with actual IPs. If your server only has a public IP, put it on both lines.'
echo
# In Amazon EC2, these two variables will be found automatically.
# For all other servers, you may replace them with the actual IPs,
# or comment out and let the script auto-detect in the next section.
# If your server only has a public IP, put it on both lines.
PUBLIC_IP=$(wget --retry-connrefused -t 3 -T 15 -qO- 'http://169.254.169.254/latest/meta-data/public-ipv4')
PRIVATE_IP=$(wget --retry-connrefused -t 3 -T 15 -qO- 'http://169.254.169.254/latest/meta-data/local-ipv4')
# Attempt to find server IPs for non-EC2 servers
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(dig +short myip.opendns.com @resolver1.opendns.com)
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(wget -t 3 -T 15 -qO- http://ipv4.icanhazip.com)
[ -z "$PUBLIC_IP" ] && PUBLIC_IP=$(wget -t 3 -T 15 -qO- http://ipecho.net/plain)
[ -z "$PRIVATE_IP" ] && PRIVATE_IP=$(ip -4 route get 1 | awk '{print $NF;exit}')
[ -z "$PRIVATE_IP" ] && PRIVATE_IP=$(ifconfig eth0 | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*')
# Check IPs for correct format
IP_REGEX="^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$"
if printf %s "$PUBLIC_IP" | grep -vEq "$IP_REGEX"; then
echo "Could not find valid Public IP, please edit the VPN script manually."
exit 1
fi
if printf %s "$PRIVATE_IP" | grep -vEq "$IP_REGEX"; then
echo "Could not find valid Private IP, please edit the VPN script manually."
exit 1
fi
# Add the EPEL repository
if grep -qs "release 6" /etc/redhat-release; then
EPEL_RPM="epel-release-6-8.noarch.rpm"
EPEL_URL="http://download.fedoraproject.org/pub/epel/6/x86_64/$EPEL_RPM"
elif grep -qs "release 7" /etc/redhat-release; then
EPEL_RPM="epel-release-7-5.noarch.rpm"
EPEL_URL="http://download.fedoraproject.org/pub/epel/7/x86_64/e/$EPEL_RPM"
else
echo "Sorry, this script only supports versions 6 and 7 of CentOS/RHEL."
exit 1
fi
wget -t 3 -T 30 -nv -O "$EPEL_RPM" "$EPEL_URL"
[ ! -f "$EPEL_RPM" ] && { echo "Could not retrieve EPEL repository RPM file. Aborting."; exit 1; }
rpm -ivh --force "$EPEL_RPM" && /bin/rm -f "$EPEL_RPM"
# Install necessary packages
yum -y install nss-devel nspr-devel pkgconfig pam-devel \
libcap-ng-devel libselinux-devel \
curl-devel gmp-devel flex bison gcc make \
fipscheck-devel unbound-devel gmp gmp-devel xmlto
yum -y install ppp xl2tpd
# Install Fail2Ban to protect SSH server
yum -y install fail2ban
# Install IP6Tables for CentOS/RHEL 6
if grep -qs "release 6" /etc/redhat-release; then
yum -y install iptables-ipv6
fi
# Installed Libevent2. Use backported version for CentOS 6.
if grep -qs "release 6" /etc/redhat-release; then
LE2_URL="https://people.redhat.com/pwouters/libreswan-rhel6"
RPM1="libevent2-2.0.21-1.el6.x86_64.rpm"
RPM2="libevent2-devel-2.0.21-1.el6.x86_64.rpm"
wget -t 3 -T 30 -nv -O "$RPM1" "$LE2_URL/$RPM1"
wget -t 3 -T 30 -nv -O "$RPM2" "$LE2_URL/$RPM2"
[ ! -f "$RPM1" ] || [ ! -f "$RPM2" ] && { echo "Could not retrieve Libevent2 RPM file(s). Aborting."; exit 1; }
rpm -ivh --force "$RPM1" "$RPM2" && /bin/rm -f "$RPM1" "$RPM2"
elif grep -qs "release 7" /etc/redhat-release; then
yum -y install libevent-devel
fi
# Compile and install Libreswan (https://libreswan.org/)
SWAN_VER=3.16
SWAN_FILE="libreswan-${SWAN_VER}.tar.gz"
SWAN_URL="https://download.libreswan.org/${SWAN_FILE}"
wget -t 3 -T 30 -nv -O "$SWAN_FILE" "$SWAN_URL"
[ ! -f "$SWAN_FILE" ] && { echo "Could not retrieve Libreswan source file. Aborting."; exit 1; }
/bin/rm -rf "/opt/src/libreswan-${SWAN_VER}"
tar xvzf "$SWAN_FILE" && rm -f "$SWAN_FILE"
cd "libreswan-${SWAN_VER}" || { echo "Failed to enter Libreswan source directory. Aborting."; exit 1; }
make programs && make install
# Prepare various config files
# Create Libreswan configuration
/bin/cp -f /etc/ipsec.conf "/etc/ipsec.conf.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat > /etc/ipsec.conf <<EOF
version 2.0
config setup
dumpdir=/var/run/pluto/
nat_traversal=yes
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!192.168.42.0/24
oe=off
protostack=netkey
nhelpers=0
interfaces=%defaultroute
conn vpnpsk
connaddrfamily=ipv4
auto=add
left=$PRIVATE_IP
leftid=$PUBLIC_IP
leftsubnet=$PRIVATE_IP/32
leftnexthop=%defaultroute
leftprotoport=17/1701
rightprotoport=17/%any
right=%any
rightsubnetwithin=0.0.0.0/0
forceencaps=yes
authby=secret
pfs=no
type=transport
auth=esp
ike=3des-sha1,aes-sha1
phase2alg=3des-sha1,aes-sha1
rekey=no
keyingtries=5
dpddelay=30
dpdtimeout=120
dpdaction=clear
EOF
# Specify IPsec PSK
/bin/cp -f /etc/ipsec.secrets "/etc/ipsec.secrets.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat > /etc/ipsec.secrets <<EOF
$PUBLIC_IP %any : PSK "$IPSEC_PSK"
EOF
# Create xl2tpd config
/bin/cp -f /etc/xl2tpd/xl2tpd.conf "/etc/xl2tpd/xl2tpd.conf.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat > /etc/xl2tpd/xl2tpd.conf <<EOF
[global]
port = 1701
;debug avp = yes
;debug network = yes
;debug state = yes
;debug tunnel = yes
[lns default]
ip range = 192.168.42.10-192.168.42.250
local ip = 192.168.42.1
require chap = yes
refuse pap = yes
require authentication = yes
name = l2tpd
;ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes
EOF
# Specify xl2tpd options
/bin/cp -f /etc/ppp/options.xl2tpd "/etc/ppp/options.xl2tpd.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat > /etc/ppp/options.xl2tpd <<EOF
ipcp-accept-local
ipcp-accept-remote
ms-dns 8.8.8.8
ms-dns 8.8.4.4
noccp
auth
crtscts
idle 1800
mtu 1280
mru 1280
lock
lcp-echo-failure 10
lcp-echo-interval 60
connect-delay 5000
EOF
# Create VPN credentials
/bin/cp -f /etc/ppp/chap-secrets "/etc/ppp/chap-secrets.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat > /etc/ppp/chap-secrets <<EOF
# Secrets for authentication using CHAP
# client server secret IP addresses
"$VPN_USER" l2tpd "$VPN_PASSWORD" *
EOF
# Update sysctl settings for VPN and better performance
if ! grep -qs "hwdsl2 VPN script" /etc/sysctl.conf; then
/bin/cp -f /etc/sysctl.conf "/etc/sysctl.conf.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat >> /etc/sysctl.conf <<EOF
# Added by hwdsl2 VPN script
kernel.sysrq = 0
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
kernel.randomize_va_space = 1
net.ipv4.ip_forward = 1
net.ipv4.tcp_syncookies = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.log_martians = 1
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.lo.send_redirects = 0
net.ipv4.conf.eth0.send_redirects = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.eth0.rp_filter = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.core.wmem_max = 12582912
net.core.rmem_max = 12582912
net.ipv4.tcp_rmem = 10240 87380 12582912
net.ipv4.tcp_wmem = 10240 87380 12582912
EOF
fi
# Create basic IPTables rules. First, check if there are existing IPTables rules loaded.
# 1. If IPTables is "empty", write out the new set of rules below.
# 2. If *not* empty, insert new rules and save them together with existing ones.
if ! grep -qs "hwdsl2 VPN script" /etc/sysconfig/iptables; then
/bin/cp -f /etc/sysconfig/iptables "/etc/sysconfig/iptables.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
/sbin/service fail2ban stop >/dev/null 2>&1
if [ "$(/sbin/iptables-save | grep -c '^\-')" = "0" ]; then
cat > /etc/sysconfig/iptables <<EOF
# Added by hwdsl2 VPN script
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:ICMPALL - [0:0]
-A INPUT -m conntrack --ctstate INVALID -j DROP
-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -d 127.0.0.0/8 -j REJECT
-A INPUT -p icmp --icmp-type 255 -j ICMPALL
-A INPUT -p udp --dport 67:68 --sport 67:68 -j ACCEPT
-A INPUT -p tcp --dport 22 -j ACCEPT
-A INPUT -p udp -m multiport --dports 500,4500 -j ACCEPT
-A INPUT -p udp --dport 1701 -m policy --dir in --pol ipsec -j ACCEPT
-A INPUT -p udp --dport 1701 -j DROP
-A INPUT -j DROP
-A FORWARD -m conntrack --ctstate INVALID -j DROP
-A FORWARD -i eth+ -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i ppp+ -o eth+ -j ACCEPT
# If you wish to allow traffic between VPN clients themselves, uncomment this line:
# -A FORWARD -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j ACCEPT
-A FORWARD -j DROP
-A ICMPALL -p icmp -f -j DROP
-A ICMPALL -p icmp --icmp-type 0 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 3 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 4 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 8 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 11 -j ACCEPT
-A ICMPALL -p icmp -j DROP
COMMIT
*nat
:PREROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING -s 192.168.42.0/24 -o eth+ -j SNAT --to-source "${PRIVATE_IP}"
COMMIT
EOF
else
iptables -I INPUT 1 -p udp -m multiport --dports 500,4500 -j ACCEPT
iptables -I INPUT 2 -p udp --dport 1701 -m policy --dir in --pol ipsec -j ACCEPT
iptables -I INPUT 3 -p udp --dport 1701 -j DROP
iptables -I FORWARD 1 -m conntrack --ctstate INVALID -j DROP
iptables -I FORWARD 2 -i eth+ -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -I FORWARD 3 -i ppp+ -o eth+ -j ACCEPT
# iptables -I FORWARD 4 -i ppp+ -o ppp+ -s 192.168.42.0/24 -d 192.168.42.0/24 -j ACCEPT
iptables -A FORWARD -j DROP
iptables -t nat -I POSTROUTING -s 192.168.42.0/24 -o eth+ -j SNAT --to-source "${PRIVATE_IP}"
echo "# Modified by hwdsl2 VPN script" > /etc/sysconfig/iptables
/sbin/iptables-save >> /etc/sysconfig/iptables
fi
fi
# Create basic IP6Tables rules
if ! grep -qs "hwdsl2 VPN script" /etc/sysconfig/ip6tables; then
/bin/cp -f /etc/sysconfig/ip6tables "/etc/sysconfig/ip6tables.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat > /etc/sysconfig/ip6tables <<EOF
# Added by hwdsl2 VPN script
*filter
:INPUT ACCEPT [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -m rt --rt-type 0 -j DROP
-A INPUT -s fe80::/10 -j ACCEPT
-A INPUT -p ipv6-icmp -j ACCEPT
-A INPUT -j DROP
COMMIT
EOF
fi
# Create basic Fail2Ban rules if not already exist
if [ ! -f /etc/fail2ban/jail.local ] ; then
cat > /etc/fail2ban/jail.local <<EOF
[DEFAULT]
ignoreip = 127.0.0.1/8
bantime = 600
findtime = 600
maxretry = 5
backend = auto
[ssh-iptables]
enabled = true
filter = sshd
action = iptables[name=SSH, port=ssh, protocol=tcp]
logpath = /var/log/secure
EOF
fi
# Update rc.local to start services at system boot
if ! grep -qs "hwdsl2 VPN script" /etc/rc.local; then
/bin/cp -f /etc/rc.local "/etc/rc.local.old-$(date +%Y-%m-%d-%H:%M:%S)" 2>/dev/null
cat >> /etc/rc.local <<EOF
# Added by hwdsl2 VPN script
/sbin/iptables-restore < /etc/sysconfig/iptables
/sbin/ip6tables-restore < /etc/sysconfig/ip6tables
/sbin/service fail2ban restart
/sbin/service ipsec start
/sbin/service xl2tpd start
echo 1 > /proc/sys/net/ipv4/ip_forward
EOF
fi
# Initialize Libreswan database
if [ ! -f /etc/ipsec.d/cert8.db ] ; then
echo > /var/tmp/libreswan-nss-pwd
/usr/bin/certutil -N -f /var/tmp/libreswan-nss-pwd -d /etc/ipsec.d
/bin/rm -f /var/tmp/libreswan-nss-pwd
fi
# Restore SELinux contexts
restorecon /etc/ipsec.d/*db 2>/dev/null
restorecon /usr/local/sbin -Rv 2>/dev/null
restorecon /usr/local/libexec/ipsec -Rv 2>/dev/null
# Reload sysctl.conf settings
/sbin/sysctl -p
# Update attributes of various files
/bin/chmod +x /etc/rc.local
/bin/chmod 600 /etc/ipsec.secrets* /etc/ppp/chap-secrets*
# Apply new IPTables rules
/sbin/iptables-restore < /etc/sysconfig/iptables
/sbin/ip6tables-restore < /etc/sysconfig/ip6tables
# Restart services
/sbin/service fail2ban stop >/dev/null 2>&1
/sbin/service ipsec stop >/dev/null 2>&1
/sbin/service xl2tpd stop >/dev/null 2>&1
/sbin/service fail2ban start
/sbin/service ipsec start
/sbin/service xl2tpd start
Reference in New Issue View Git Blame Copy Permalink