#!/bin/sh
#
# Amazon EC2 user-data file for automatic configuration of IPsec/L2TP VPN
# on a Ubuntu server instance. Tested with 14.04 (Trusty) AND 12.04 (Precise).
# With minor modifications, this script *can also be used* on dedicated servers
# or any KVM- or XEN-based Virtual Private Server (VPS) from other providers.
#
# DO NOT RUN THIS SCRIPT ON YOUR PC OR MAC! THIS IS MEANT TO BE RUN WHEN 
# YOUR AMAZON EC2 INSTANCE STARTS!
#
# For detailed instructions, please see:
# https://blog.ls20.com/ipsec-l2tp-vpn-auto-setup-for-ubuntu-12-04-on-amazon-ec2/
# Original post by Thomas Sarlandie: 
# http://www.sarfata.org/posts/setting-up-an-amazon-vpn-server.md
#
# Copyright (C) 2014 Lin Song
# Based on the work of Thomas Sarlandie (Copyright 2012)
#
# This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 
# Unported License: http://creativecommons.org/licenses/by-sa/3.0/
#
# Attribution required: please include my name in any derivative and let me
# know how you have improved it! 

if [[ "$(uname)" == "Darwin" ]]; then
  echo "DO NOT run this script on your Mac! It should only be run on a newly-created EC2 instance"
  echo "or other dedicated server / VPS, after you have modified it to set the three variables below."
  echo "Please see detailed instructions at the URLs in the comments."
  exit 1
fi

# Please define your own values for those variables
IPSEC_PSK=your_very_secure_key
VPN_USER=your_username
VPN_PASSWORD=your_very_secure_password

# Note: If you need multiple VPN users with different credentials,
# please see: https://gist.github.com/hwdsl2/123b886f29f4c689f531

# In Amazon EC2, those two variables will be found automatically.
# For all other servers, you MUST replace them with the actual IPs!
# If your server only has a public IP, use that IP on both lines.
PRIVATE_IP=$(wget -q -O - 'http://169.254.169.254/latest/meta-data/local-ipv4')
PUBLIC_IP=$(wget -q -O - 'http://169.254.169.254/latest/meta-data/public-ipv4')

# Install necessary packages
apt-get update
apt-get install libnss3-dev libnspr4-dev pkg-config libpam0g-dev \
        libcap-ng-dev libcap-ng-utils libselinux1-dev \
        libcurl4-nss-dev libgmp3-dev flex bison gcc make \
        libunbound-dev libnss3-tools wget -y
apt-get install xl2tpd -y

# Compile and install Libreswan (https://libreswan.org/)
# To upgrade Libreswan when a newer version is available, just re-run these
# six commands with the new download link, and then restart services with
# "service ipsec restart" and "service xl2tpd restart".
mkdir -p /opt/src
cd /opt/src
wget -qO- https://download.libreswan.org/libreswan-3.12.tar.gz | tar xvz
cd libreswan-3.12
make programs
make install

# Prepare various config files
cat > /etc/ipsec.conf <<EOF
version 2.0

config setup
  dumpdir=/var/run/pluto/
  nat_traversal=yes
  virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!192.168.42.0/24
  oe=off
  protostack=netkey
  nhelpers=0
  interfaces=%defaultroute

conn vpnpsk
  connaddrfamily=ipv4
  auto=add
  left=$PRIVATE_IP
  leftid=$PUBLIC_IP
  leftsubnet=$PRIVATE_IP/32
  leftnexthop=%defaultroute
  leftprotoport=17/1701
  rightprotoport=17/%any
  right=%any
  rightsubnetwithin=0.0.0.0/0
  forceencaps=yes
  authby=secret
  pfs=no
  type=transport
  auth=esp
  ike=3des-sha1,aes-sha1
  phase2alg=3des-sha1,aes-sha1
  rekey=no
  keyingtries=5
  dpddelay=30
  dpdtimeout=120
  dpdaction=clear
EOF

cat > /etc/ipsec.secrets <<EOF
$PUBLIC_IP  %any  : PSK "$IPSEC_PSK"
EOF

cat > /etc/xl2tpd/xl2tpd.conf <<EOF
[global]
port = 1701

;debug avp = yes
;debug network = yes
;debug state = yes
;debug tunnel = yes

[lns default]
ip range = 192.168.42.10-192.168.42.250
local ip = 192.168.42.1
require chap = yes
refuse pap = yes
require authentication = yes
name = l2tpd
;ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes
EOF

cat > /etc/ppp/options.xl2tpd <<EOF
ipcp-accept-local
ipcp-accept-remote
ms-dns 8.8.8.8
ms-dns 8.8.4.4
noccp
auth
crtscts
idle 1800
mtu 1280
mru 1280
lock
lcp-echo-failure 10
lcp-echo-interval 60
connect-delay 5000
EOF

cat > /etc/ppp/chap-secrets <<EOF
# Secrets for authentication using CHAP
# client  server  secret  IP addresses

$VPN_USER  l2tpd  $VPN_PASSWORD  *
EOF

/bin/cp -f /etc/sysctl.conf /etc/sysctl.conf.old-$(date +%Y-%m-%d-%H:%M:%S)
cat > /etc/sysctl.conf <<EOF
kernel.sysrq = 0
kernel.core_uses_pid = 1
net.ipv4.tcp_syncookies = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
net.ipv4.ip_forward = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.log_martians = 1
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.rp_filter = 0
net.ipv6.conf.all.disable_ipv6=1
net.ipv6.conf.default.disable_ipv6=1
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
kernel.randomize_va_space = 1
net.core.wmem_max=12582912
net.core.rmem_max=12582912
net.ipv4.tcp_rmem= 10240 87380 12582912
net.ipv4.tcp_wmem= 10240 87380 12582912
EOF

/bin/cp -f /etc/iptables.rules /etc/iptables.rules.old-$(date +%Y-%m-%d-%H:%M:%S)
cat > /etc/iptables.rules <<EOF
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:ICMPALL - [0:0]
-A INPUT -m conntrack --ctstate INVALID -j DROP
-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp --icmp-type 255 -j ICMPALL
-A INPUT -p udp --dport 67:68 --sport 67:68 -j ACCEPT
-A INPUT -p tcp --dport 22 -j ACCEPT
-A INPUT -p udp -m multiport --dports 500,4500 -j ACCEPT
-A INPUT -p udp --dport 1701 -m policy --dir in --pol ipsec -j ACCEPT
-A INPUT -p udp --dport 1701 -j DROP
-A INPUT -j DROP
-A FORWARD -m conntrack --ctstate INVALID -j DROP
-A FORWARD -i eth+ -o ppp+ -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i ppp+ -o eth+ -j ACCEPT
-A FORWARD -j DROP
-A ICMPALL -p icmp -f -j DROP        
-A ICMPALL -p icmp --icmp-type 0 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 3 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 4 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 8 -j ACCEPT
-A ICMPALL -p icmp --icmp-type 11 -j ACCEPT
-A ICMPALL -p icmp -j DROP
COMMIT
*nat
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING -s 192.168.42.0/24 -o eth+ -m policy --dir out --pol ipsec -j ACCEPT
-A POSTROUTING -s 192.168.42.0/24 -o eth+ -j SNAT --to-source ${PRIVATE_IP}
COMMIT
EOF

cat > /etc/network/if-pre-up.d/iptablesload <<EOF
#!/bin/sh
/sbin/iptables-restore < /etc/iptables.rules
exit 0
EOF

/bin/cp -f /etc/rc.local /etc/rc.local.old-$(date +%Y-%m-%d-%H:%M:%S)
cat > /etc/rc.local <<EOF
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
/usr/sbin/service ipsec restart
/usr/sbin/service xl2tpd restart
echo 1 > /proc/sys/net/ipv4/ip_forward
exit 0
EOF

if [ ! -f /etc/ipsec.d/cert8.db ] ; then
   echo > /var/tmp/libreswan-nss-pwd
   /usr/bin/certutil -N -f /var/tmp/libreswan-nss-pwd -d /etc/ipsec.d
   /bin/rm -f /var/tmp/libreswan-nss-pwd
fi

/sbin/sysctl -p
/bin/chmod +x /etc/network/if-pre-up.d/iptablesload
/sbin/iptables-restore < /etc/iptables.rules

/usr/sbin/service ipsec restart
/usr/sbin/service xl2tpd restart