# IPsec VPN Server Auto Setup Scripts
[](https://travis-ci.org/hwdsl2/setup-ipsec-vpn) [](https://github.com/hwdsl2/setup-ipsec-vpn/stargazers) [](https://github.com/hwdsl2/docker-ipsec-vpn-server) [](https://github.com/hwdsl2/docker-ipsec-vpn-server)
Set up your own IPsec VPN server in just a few minutes, with both IPsec/L2TP and Cisco IPsec on Ubuntu, Debian and CentOS. All you need to do is provide your own VPN credentials, and let the scripts handle the rest.
An IPsec VPN encrypts your network traffic, so that nobody between you and the VPN server can eavesdrop on your data as it travels via the Internet. This is especially useful when using unsecured networks, e.g. at coffee shops, airports or hotel rooms.
We will use Libreswan as the IPsec server, and xl2tpd as the L2TP provider.
**» Related tutorial: IPsec VPN Server Auto Setup with Libreswan**
*Read this in other languages: [English](README.md), [简体中文](README-zh.md).*
#### Table of Contents
- [Quick start](#quick-start)
- [Features](#features)
- [Requirements](#requirements)
- [Installation](#installation)
- [Next steps](#next-steps)
- [Important notes](#important-notes)
- [Upgrade Libreswan](#upgrade-libreswan)
- [Bugs & Questions](#bugs--questions)
- [Uninstallation](#uninstallation)
- [See also](#see-also)
- [License](#license)
## Quick start
First, prepare your Linux server* with a fresh install of Ubuntu LTS, Debian 8 or CentOS 7/6.
Use this one-liner to set up an IPsec VPN server:
```bash
wget https://git.io/vpnsetup -O vpnsetup.sh && sudo sh vpnsetup.sh
```
If using CentOS, replace `https://git.io/vpnsetup` above with `https://git.io/vpnsetup-centos`.
Your VPN login details will be randomly generated, and displayed on the screen when finished.
For other installation options and how to set up VPN clients, read the sections below.
\* A dedicated server or Virtual Private Server (VPS). OpenVZ VPS is NOT supported.
## Features
- **New:** The faster `IPsec/XAuth ("Cisco IPsec")` mode is supported
- **New:** A pre-built Docker image of the VPN server is now available
- Fully automated IPsec VPN server setup, no user input needed
- Encapsulates all VPN traffic in UDP - does not need ESP protocol
- Can be directly used as "user-data" for a new Amazon EC2 instance
- Automatically determines public IP and private IP of server
- Includes `sysctl.conf` optimizations for improved performance
- Tested with Ubuntu 16.04/14.04/12.04, Debian 8 and CentOS 7/6
## Requirements
A newly created Amazon EC2 instance, using one of these AMIs:
- Ubuntu 16.04 (Xenial), 14.04 (Trusty) or 12.04 (Precise)
- Debian 8 (Jessie) EC2 Images
- CentOS 7 (x86_64) with Updates
- CentOS 6 (x86_64) with Updates
Please refer to detailed instructions and EC2 pricing.
**-OR-**
A dedicated server or Virtual Private Server (VPS), freshly installed with one of the above OS. In addition, Debian 7 (Wheezy) can also be used with this workaround. OpenVZ VPS is NOT supported, users could instead try OpenVPN.
This also includes Linux VMs in public clouds, such as DigitalOcean, Vultr, Linode, Google Compute Engine, Amazon Lightsail, Microsoft Azure, IBM SoftLayer, Rackspace and VMware vCloud Air.
**» I want to run my own VPN but don't have a server for that**
:warning: **DO NOT** run these scripts on your PC or Mac! They should only be used on a server!
## Installation
### Ubuntu & Debian
First, update your system with `apt-get update && apt-get dist-upgrade` and reboot. This is optional, but recommended.
To install the VPN, please choose one of the following options:
**Option 1:** Have the script generate random VPN credentials for you (will be displayed when finished):
```bash
wget https://git.io/vpnsetup -O vpnsetup.sh && sudo sh vpnsetup.sh
```
**Option 2:** Edit the script and provide your own VPN credentials:
```bash
wget https://git.io/vpnsetup -O vpnsetup.sh
nano -w vpnsetup.sh
[Replace with your own values: YOUR_IPSEC_PSK, YOUR_USERNAME and YOUR_PASSWORD]
sudo sh vpnsetup.sh
```
**Option 3:** Define your VPN credentials as environment variables:
```bash
# All values MUST be placed inside 'single quotes'
# DO NOT use these characters within values: \ " '
wget https://git.io/vpnsetup -O vpnsetup.sh && sudo \
VPN_IPSEC_PSK='your_ipsec_pre_shared_key' \
VPN_USER='your_vpn_username' \
VPN_PASSWORD='your_vpn_password' sh vpnsetup.sh
```
DigitalOcean users may refer to this step-by-step guide by Tony Tran.
**Note:** If unable to download via `wget`, you may also open vpnsetup.sh (or vpnsetup_centos.sh) and click the **`Raw`** button. Press `Ctrl-A` to select all, `Ctrl-C` to copy, then paste into your favorite editor.
### CentOS & RHEL
First, update your system with `yum update` and reboot. This is optional, but recommended.
Follow the same steps as above, but replace `https://git.io/vpnsetup` with `https://git.io/vpnsetup-centos`.
## Next steps
Get your computer or device to use the VPN. Please refer to:
Configure IPsec/L2TP VPN Clients
Configure IPsec/XAuth ("Cisco IPsec") VPN Clients
How-To: IKEv2 VPN for Windows 7 and newer
If you get an error when trying to connect, see Troubleshooting.
Enjoy your very own VPN! :sparkles::tada::rocket::sparkles:
## Important notes
*Read this in other languages: [English](README.md#important-notes), [简体中文](README-zh.md#重要提示).*
**Windows and Android users**: If you get an error when trying to connect, see Troubleshooting.
The same VPN account can be used by your multiple devices. However, due to an IPsec limitation, only one device behind the same NAT (e.g. home router) can connect to the VPN server at a time. This applies even if you create multiple users.
If you wish to add, edit or remove VPN user accounts, see Manage VPN Users.
For servers with an external firewall (e.g. EC2/GCE), open UDP ports 500 & 4500, and TCP port 22 (for SSH).
Clients are set to use Google Public DNS when the VPN is active. If another DNS provider is preferred, replace `8.8.8.8` and `8.8.4.4` in both `/etc/ppp/options.xl2tpd` and `/etc/ipsec.conf`. Then reboot your server.
To modify the IPTables rules after install, edit `/etc/iptables.rules` and/or `/etc/iptables/rules.v4` (Ubuntu/Debian), or `/etc/sysconfig/iptables` (CentOS). Then reboot your server.
When connecting via `IPsec/L2TP`, the VPN server has IP `192.168.42.1` within the VPN subnet `192.168.42.0/24`.
The scripts will backup existing config files before making changes, with `.old-date-time` suffix.
## Upgrade Libreswan
The additional scripts vpnupgrade.sh and vpnupgrade_centos.sh can be used to upgrade Libreswan (changelog | announce). Edit the `swan_ver` variable as necessary. Check installed version: `ipsec --version`.
```bash
# Ubuntu & Debian
wget https://git.io/vpnupgrade -O vpnupgrade.sh
# CentOS & RHEL
wget https://git.io/vpnupgrade-centos -O vpnupgrade.sh
```
## Bugs & Questions
- Got a question? Please first search other people's comments in this Gist and on my blog.
- Ask VPN related questions on these mailing lists: [1] [2], or read related articles: [1] [2] [3] [4] [5].
- If you found a reproducible bug, open a GitHub Issue to submit a bug report.
## Uninstallation
Please refer to Uninstall the VPN.
## See also
- IPsec VPN Server on Docker
- IKEv2 VPN Server on Docker
- Streisand
- SoftEther VPN
- Shadowsocks
- OpenVPN Install
- Setup strongSwan
## License
Copyright (C) 2014-2017 Lin Song 
Based on the work of Thomas Sarlandie (Copyright 2012)
This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License
Attribution required: please include my name in any derivative and let me know how you have improved it!