mirror/setup-ipsec-vpn
1
0
Fork 0
mirror of synced 2024-11-21 20:46:10 +03:00
Code Issues Projects Releases Wiki Activity

Update docs

Browse Source
This commit is contained in:
hwdsl2 2024-02-24 19:15:05 -06:00
parent d56472d15e
commit f5acbdf54d
2 changed files with 10 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
docs/advanced-usage-zh.md
View File

@ -281,11 +281,11 @@ iptables -t nat -A PREROUTING -i "$netif" ! -s 192.168.43.0/24 -p udp --dport 12
## VPN 分流
在启用 VPN 分流 (split tunneling) 时，VPN 客户端将仅通过 VPN 隧道发送特定目标子网的流量。其他流量 **不会** 通过 VPN 隧道。VPN 分流有一些局限性，而且并非所有的 VPN 客户端都支持。
在启用 VPN 分流 (split tunneling) 时，VPN 客户端将仅通过 VPN 隧道发送特定目标子网的流量。其他流量 **不会** 通过 VPN 隧道。这允许你通过 VPN 安全访问指定的网络，而无需通过 VPN 发送所有客户端的流量。VPN 分流有一些局限性，而且并非所有的 VPN 客户端都支持。
高级用户可以为 [IPsec/XAuth ("Cisco IPsec")](clients-xauth-zh.md) 和/或 [IKEv2](ikev2-howto-zh.md) 模式启用 VPN 分流。这是可选的。IPsec/L2TP 模式不支持此功能（Windows 除外，见下文）。
高级用户可以为 [IPsec/XAuth ("Cisco IPsec")](clients-xauth-zh.md) 和/或 [IKEv2](ikev2-howto-zh.md) 模式启用 VPN 分流。这是可选的。展开查看详情。IPsec/L2TP 模式不支持此功能（Windows 除外，见下文）。
<details open>
<details>
<summary>
IPsec/XAuth ("Cisco IPsec") 模式：启用 VPN 分流 (split tunneling)
</summary>
@ -302,7 +302,7 @@ IPsec/XAuth ("Cisco IPsec") 模式：启用 VPN 分流 (split tunneling)
```
</details>
<details open>
<details>
<summary>
IKEv2 模式：启用 VPN 分流 (split tunneling)
</summary>
@ -332,7 +332,7 @@ IKEv2 模式：启用 VPN 分流 (split tunneling)
1. 单击 **高级**，然后取消选中 **在远程网络上使用默认网关**。
1. 单击 **确定** 以关闭 **属性** 对话框。
1. **（重要）** 断开 VPN 连接，然后重新连接。
1. 假设你想要 VPN 客户端通过 VPN 隧道发送流量的子网是 `10.123.123.0/24`。打开[提升权限命令提示符](http://www.cnblogs.com/xxcanghai/p/4610054.html)并运行以下命令。
1. 假设你想要 VPN 客户端通过 VPN 隧道发送流量的子网是 `10.123.123.0/24`。打开[提升权限命令提示符](http://www.cnblogs.com/xxcanghai/p/4610054.html)并运行以下命令之一。
对于 IKEv2 和 IPsec/XAuth ("Cisco IPsec") 模式：
```
route add -p 10.123.123.0 mask 255.255.255.0 192.168.43.1

10
docs/advanced-usage.md
View File

@ -281,11 +281,11 @@ If you want the rules to persist after reboot, you may add these commands to `/e
## Split tunneling
With split tunneling, VPN clients will only send traffic for a specific destination subnet through the VPN tunnel. Other traffic will NOT go through the VPN tunnel. Split tunneling has some limitations, and is not supported by all VPN clients.
With split tunneling, VPN clients will only send traffic for a specific destination subnet through the VPN tunnel. Other traffic will NOT go through the VPN tunnel. This allows you to gain secure access to a network through your VPN, without routing all your client's traffic through the VPN. Split tunneling has some limitations, and is not supported by all VPN clients.
Advanced users can optionally enable split tunneling for the [IPsec/XAuth ("Cisco IPsec")](clients-xauth.md) and/or [IKEv2](ikev2-howto.md) modes. IPsec/L2TP mode does not support this feature (except on Windows, see below).
Advanced users can optionally enable split tunneling for the [IPsec/XAuth ("Cisco IPsec")](clients-xauth.md) and/or [IKEv2](ikev2-howto.md) modes. Expand for details. IPsec/L2TP mode does not support this feature (except on Windows, see below).
<details open>
<details>
<summary>
IPsec/XAuth ("Cisco IPsec") mode: Enable split tunneling
</summary>
@ -302,7 +302,7 @@ The example below **ONLY** applies to IPsec/XAuth ("Cisco IPsec") mode. Commands
```
</details>
<details open>
<details>
<summary>
IKEv2 mode: Enable split tunneling
</summary>
@ -332,7 +332,7 @@ Alternatively, Windows users can enable split tunneling by manually adding route
1. Click **Advanced**. Uncheck **Use default gateway on remote network**.
1. Click **OK** to close the **Properties** window.
1. **(Important)** Disconnect the VPN, then re-connect.
1. Assume that the subnet you want VPN clients to send traffic through the VPN tunnel is `10.123.123.0/24`. Open an [elevated command prompt](http://www.winhelponline.com/blog/open-elevated-command-prompt-windows/) and run the following commands:
1. Assume that the subnet you want VPN clients to send traffic through the VPN tunnel is `10.123.123.0/24`. Open an [elevated command prompt](http://www.winhelponline.com/blog/open-elevated-command-prompt-windows/) and run one of the following commands:
For IKEv2 and IPsec/XAuth ("Cisco IPsec") modes:
```
route add -p 10.123.123.0 mask 255.255.255.0 192.168.43.1