naiveproxy/components/arc/common/oemcrypto.mojom

232 lines
8.8 KiB
Plaintext
Raw Normal View History

2018-01-28 19:30:36 +03:00
// Copyright 2017 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
// The original version of this file lives in the Chromium repository at:
// src/components/arc/common/oemcrypto.mojom
// This file defines the mojo interface between Android, Chrome and the
// Chrome OS daemon for the Widevine L1 OEMCrypto implementation used in ARC++.
// This files matches what's in Widevine's OEMCryptoCENC.h file closely and all
// methods are documented there.
module arc.mojom;
[Extensible]
enum OemCryptoResult {
SUCCESS = 0,
ERROR_INIT_FAILED = 1,
ERROR_TERMINATE_FAILED = 2,
ERROR_OPEN_FAILURE = 3,
ERROR_CLOSE_FAILURE = 4,
ERROR_ENTER_SECURE_PLAYBACK_FAILED = 5,
ERROR_EXIT_SECURE_PLAYBACK_FAILED = 6,
ERROR_SHORT_BUFFER = 7,
ERROR_NO_DEVICE_KEY = 8,
ERROR_NO_ASSET_KEY = 9,
ERROR_KEYBOX_INVALID = 10,
ERROR_NO_KEYDATA = 11,
ERROR_NO_CW = 12,
ERROR_DECRYPT_FAILED = 13,
ERROR_WRITE_KEYBOX = 14,
ERROR_WRAP_KEYBOX = 15,
ERROR_BAD_MAGIC = 16,
ERROR_BAD_CRC = 17,
ERROR_NO_DEVICEID = 18,
ERROR_RNG_FAILED = 19,
ERROR_RNG_NOT_SUPPORTED = 20,
ERROR_SETUP = 21,
ERROR_OPEN_SESSION_FAILED = 22,
ERROR_CLOSE_SESSION_FAILED = 23,
ERROR_INVALID_SESSIONS = 24,
ERROR_NOT_IMPLEMENTED = 25,
ERROR_NO_CONTENT_KEY = 26,
ERROR_CONTROL_INVALID = 27,
ERROR_UNKNOWN_FAILURE = 28,
ERROR_INVALID_CONTEXT = 29,
ERROR_SIGNATURE_FAILURE = 30,
ERROR_TOO_MANY_SESSIONS = 31,
ERROR_INVALID_NONCE = 32,
ERROR_TOO_MANY_KEYS = 33,
ERROR_DEVICE_NOT_RSA_PROVISIONED = 34,
ERROR_INVALID_RSA_KEY = 35,
ERROR_KEY_EXPIRED = 36,
ERROR_INSUFFICIENT_RESOURCES = 37,
ERROR_INSUFFICIENT_HDCP = 38,
};
struct OemCryptoSecureBuffer {
// buffer_handle should be passed to the ProtectedBufferManager service in
// the GPU in order to retrieve the shared memory handle that corresponds
// to the actual secure buffer. It should then be mapped and data written at
// offset up until offset + max_length.
handle buffer_handle;
uint32 max_length;
uint32 offset;
};
[Extensible]
enum OemCryptoCipherMode {
CIPHER_MODE_CTR = 0,
CIPHER_MODE_CBC = 1,
};
struct OemCryptoKeyObject {
uint32 key_id_offset;
uint32 key_id_length;
uint32 key_data_iv_offset;
uint32 key_data_offset;
uint32 key_data_length;
uint32 key_control_iv_offset;
uint32 key_control_offset;
OemCryptoCipherMode cipher_mode;
};
struct OemCryptoKeyRefreshObject {
uint32 key_id_offset;
uint32 key_id_length;
bool has_key_control_iv;
uint32 key_control_iv_offset;
uint32 key_control_offset;
};
[Extensible]
enum OemCryptoAlgorithm {
AES_CBC_128_NO_PADDING = 0,
HMAC_SHA265 = 1,
};
struct OemCryptoCencEncryptPatternDesc {
uint32 encrypt;
uint32 skip;
uint32 offset;
};
struct OemCryptoPstReport {
array<uint8, 20> signature;
uint8 status;
uint8 clock_security_level;
uint64 seconds_since_license_received;
uint64 seconds_since_first_decrypt;
uint64 seconds_since_last_decrypt;
};
[Extensible]
enum OemCryptoRsaPaddingScheme {
SIGN_RSASSA_PSS = 1,
SIGN_PKCS1_BLOCK1 = 2,
};
[Extensible]
enum OemCryptoHdcpCapability {
HDCP_NONE = 0,
HDCP_V1 = 1,
HDCP_V2 = 2,
HDCP_V2_1 = 3,
HDCP_V2_2 = 4,
HDCP_NO_DIGITAL_OUTPUT = 0xFF,
};
// This is the interface that implements all the calls that map to the
// OEMCrypto API itself.
// Next method ID: 36
interface OemCryptoService {
Initialize@0() => (OemCryptoResult result);
Terminate@1() => (OemCryptoResult result);
OpenSession@2() => (OemCryptoResult result, uint32 session);
CloseSession@3(uint32 session) => (OemCryptoResult result);
GenerateDerivedKeys@4(uint32 session, array<uint8> mac_key_context,
array<uint8> enc_key_context)
=> (OemCryptoResult result);
GenerateNonce@5(uint32 session) => (OemCryptoResult result, uint32 nonce);
GenerateSignature@6(uint32 session, array<uint8> message)
=> (OemCryptoResult result, array<uint8>? signature);
// The offset values are offsets into the message parameter for those values.
// If they have a length and it's zero, then they are NULL; if there is no
// length param then a bool param is there to indicate presence.
LoadKeys@7(uint32 session, array<uint8> message, array<uint8> signature,
bool has_enc_mac_keys, uint32 enc_mac_keys_iv_offset,
uint32 enc_mac_keys_offset, array<OemCryptoKeyObject> key_array,
uint32 pst_offset, uint32 pst_length)
=> (OemCryptoResult result);
RefreshKeys@8(uint32 session, array<uint8> message, array<uint8> signature,
array<OemCryptoKeyRefreshObject> key_array)
=> (OemCryptoResult result);
QueryKeyControl@9(uint32 session, array<uint8> key_id)
=> (OemCryptoResult result, array<uint8>? key_control_block);
SelectKey@10(uint32 session, array<uint8> key_id)
=> (OemCryptoResult result);
// For decrypting to a secure buffer, pass in the secure_buffer parameter,
// otherwise it will return the contents decrypted into a clear buffer in the
// returned array. It will only do that if the drm policy allows it.
DecryptCenc@11(uint32 session, array<uint8> data, bool is_encrypted,
array<uint8, 16> iv, uint32 block_offset,
OemCryptoSecureBuffer? secure_buffer,
OemCryptoCencEncryptPatternDesc pattern)
=> (OemCryptoResult result, array<uint8>? decrypted_data);
GenericEncrypt@12(uint32 session, array<uint8> data, array<uint8, 16> iv,
OemCryptoAlgorithm algorithm) =>
(OemCryptoResult result, array<uint8>? encrypted_data);
GenericDecrypt@13(uint32 session, array<uint8> data, array<uint8, 16> iv,
OemCryptoAlgorithm algorithm) =>
(OemCryptoResult result, array<uint8>? decrypted_data);
GenericSign@14(uint32 session, array<uint8> data,
OemCryptoAlgorithm algorithm) =>
(OemCryptoResult result, array<uint8>? signature);
GenericVerify@15(uint32 session, array<uint8> data,
OemCryptoAlgorithm algorithm, array<uint8> signature) =>
(OemCryptoResult result);
CopyBuffer@16(array<uint8> data, OemCryptoSecureBuffer out_buffer)
=> (OemCryptoResult result);
LoadTestKeybox@17() => (OemCryptoResult result);
IsKeyboxValid@18() => (OemCryptoResult result);
GetDeviceId@19() => (OemCryptoResult result, array<uint8>? device_id);
GetKeyData@20() => (OemCryptoResult result, array<uint8>? key_data);
GetRandom@21(uint32 length) => (OemCryptoResult result, array<uint8>? data);
GetNumberOfOpenSessions@22() => (OemCryptoResult result, uint32 num);
GetMaxNumberOfSessions@23() => (OemCryptoResult result, uint32 max);
RewrapDeviceRsaKey@24(uint32 session, array<uint8> message,
array<uint8> signature, uint32 nonce_offset,
uint32 enc_rsa_key_offset, uint32 enc_rsa_key_length,
uint32 enc_rsa_key_iv_offset)
=> (OemCryptoResult result, array<uint8>? wrapped_key);
LoadDeviceRsaKey@25(uint32 session, array<uint8> wrapped_rsa_key)
=> (OemCryptoResult result);
GenerateRsaSignature@26(uint32 session, array<uint8> message,
OemCryptoRsaPaddingScheme padding_scheme)
=> (OemCryptoResult result, array<uint8>? signature);
DeriveKeysFromSessionKey@27(uint32 session, array<uint8> enc_session_key,
array<uint8> mac_key_context,
array<uint8> enc_key_context)
=> (OemCryptoResult result);
SecurityPatchLevel@28() => (uint8 security_patch_level);
GetHdcpCapability@29() => (OemCryptoResult result,
OemCryptoHdcpCapability current,
OemCryptoHdcpCapability maximum);
UpdateUsageTable@30() => (OemCryptoResult result);
DeactivateUsageEntry@31(array<uint8> pst) => (OemCryptoResult result);
ReportUsage@32(uint32 session, array<uint8> pst)
=> (OemCryptoResult result, OemCryptoPstReport? report);
DeleteUsageEntry@33(uint32 session, uint32 pst_offset, uint32 pst_length,
array<uint8> message, array<uint8> signature) =>
(OemCryptoResult result);
ForceDeleteUsageEntry@34(array<uint8> pst) => (OemCryptoResult result);
DeleteUsageTable@35() => (OemCryptoResult result);
};
// OemCryptoService is implemented as another service outside of the Browser
// process, so we need to proxy a connection to it through ArcBridge initially.
// This interface is implemented in the Browser process and also in the daemon
// that runs in Chrome OS.
// Next Method ID: 1
interface OemCryptoHost {
Connect@0(OemCryptoService& oemcryptor);
};
// OemCryptoInstance is implemented in the liboemcrypto.so library that runs in
// Android and handles the Android side of the ArcBridge connection.
// Next Method ID: 1
interface OemCryptoInstance {
Init@0(OemCryptoHost host_ptr);
};