naiveproxy/chromeos/services/multidevice_setup/public/mojom/multidevice_setup.mojom

// Copyright 2018 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

module chromeos.multidevice_setup.mojom;

import "chromeos/services/device_sync/public/mojom/device_sync.mojom";

// Enumeration of event types which can be dispatched. Only used for debugging
// purposes.
enum EventTypeForDebugging {
  kNewUserPotentialHostExists,
  kExistingUserConnectedHostSwitched,
  kExistingUserNewChromebookAdded,
};

enum HostStatus {
  // The user's account has no devices which can serve as a host for
  // multi-device features.
  kNoEligibleHosts,

  // The user's account has one or more devices which can be used as a host for
  // multi-device features, but the user has not yet completed the setup flow
  // for any one of these devices.
  kEligibleHostExistsButNoHostSet,

  // The user has completed the setup flow for multi-device features on this
  // device, but there was an error contacting the back-end (e.g., the device
  // was offline during the setup flow, or the back-end rejected the request for
  // some reason). The local device will continue trying to contact the back-end
  // to confirm that the host is set.
  kHostSetLocallyButWaitingForBackendConfirmation,

  // The host has been set (both locally and on the back-end), but verification
  // has not yet completed. The local device will continue trying to establish
  // a Bluetooth connection to the host until verification succeeds.
  kHostSetButNotYetVerified,

  // The host has been set (both locally and on the back-end), and the
  // verification step over Bluetooth has completed. Features should be
  // available for use.
  kHostVerified
};

// Individual multi-device features types.
enum Feature {
  kBetterTogetherSuite,
  kInstantTethering,
  kMessages,
  kSmartLock
};

enum FeatureState {
  // Feature was prohibited by a device policy (e.g., EDU or Enterprise).
  kProhibitedByPolicy,

  // Feature was disabled by the user (i.e., via settings).
  kDisabledByUser,

  // Feature was enabled by the user (i.e., via settings).
  kEnabledByUser,

  // Feature is not supported by this Chromebook.
  kNotSupportedByChromebook,

  // Feature is not supported by the current host phone device.
  kNotSupportedByPhone,

  // The feature is unavailable because there is no verified multi-device host.
  // To set a host, use SetHostDevice(); to verify a host, use
  // RetrySetHostNow().
  kUnavailableNoVerifiedHost,

  // The feature is unavailable because there are insufficient security
  // mechanisms in place (e.g., Smart Lock returns this value when the host
  // phone device does not have a lock screen set).
  kUnavailableInsufficientSecurity,

  // The feature has been enabled by the user, but it is still unavailable
  // because the entire Better Together suite has been disabled by the user.
  kUnavailableSuiteDisabled
};

interface AccountStatusChangeDelegate {
  // Callback which indicates that one or more MultiDevice host phones are
  // available for setup with the MultiDevice setup flow. This function is only
  // called if the current user has not yet set up MultiDevice features.
  OnPotentialHostExistsForNewUser();

  // Callback which indicates that the currently-connected MultiDevice host has
  // changed. This likely means that the user has changed MultiDevice settings
  // on another device. This function is only called if the current user has
  // already set up MultiDevice features. Note: |new_host_device_name| is
  // expected to be a UTF-8 string.
  OnConnectedHostSwitchedForExistingUser(string new_host_device_name);

  // Callback which indicates that a new Chromebook was added to the account of
  // the current user. This function is only called if the current user has
  // already set up MultiDevice features.
  OnNewChromebookAddedForExistingUser();
};

interface HostStatusObserver {
  // Called whenever the host status changes. If the host status is
  // HostStatus::kNoEligibleHosts or
  // HostStatus::kEligibleHostExistsButNoHostSet, |host_device| is null.
  OnHostStatusChanged(HostStatus host_status,
                      chromeos.device_sync.mojom.RemoteDevice? host_device);
};

interface FeatureStateObserver {
  // Invoked when one or more features have changed state.
  OnFeatureStatesChanged(map<Feature, FeatureState> feature_states_map);
};

// Provides an API to the MultiDevice Setup flow. Designed to be exposed
// primarily to the MultiDevice setup flow at chrome://multidevice-setup (normal
// usage) as well as the ProximityAuth debug WebUI page at
// chrome://proximity-auth (debugging only).
interface MultiDeviceSetup {
  // Registers the "account status change" delegate to be used by the service.
  // Only one delegate can be set; this function should not be called more than
  // once.
  SetAccountStatusChangeDelegate(AccountStatusChangeDelegate delegate);

  // Adds an observer of host status changes. To stop observing, disconnect the
  // HostStatusObserverPtr passed here.
  AddHostStatusObserver(HostStatusObserver observer);

  // Adds an observer of feature state changes. To stop observing, disconnect
  // the FeatureStateObserverPtr passed here.
  AddFeatureStateObserver(FeatureStateObserver observer);

  // Provides a list of all eligible host devices (i.e., those which can be
  // passed to SetHostDevice()).
  GetEligibleHostDevices() =>
      (array<chromeos.device_sync.mojom.RemoteDevice> eligible_host_devices);

  // Sets the host associated with the provided public key as the host device
  // for this account. The provided auth token must be valid in order to prove
  // that the user is authenticated. If called when there is no current host or
  // when the current host is a different device from the one passed, this
  // function initiates a connection to the back-end and attempts to set the
  // host. When called with the same device that is already the host, this
  // function is a no-op. Returns a success boolean; this function will fail if
  // the provided public key does not correspond to an eligible host device on
  // the account, or the provided auth token is invalid.
  SetHostDevice(string public_key, string auth_token) => (bool success);

  // Removes the currently-set host as the multi-device host for this account.
  // If there was no host set to begin with, this function is a no-op.
  RemoveHostDevice();

  // Returns the host status and host device. If the host status is
  // HostStatus::kNoEligibleHosts or
  // HostStatus::kEligibleHostExistsButNoHostSet, |host_device| is null.
  GetHostStatus() => (HostStatus host_status,
                      chromeos.device_sync.mojom.RemoteDevice? host_device);

  // Attempts to enable or disable |feature|. This function succeeds only if
  // |feature|'s current state is FeatureState::kEnabledByUser or
  // FeatureState::kDisabledByUser.
  //
  // A valid |auth_token| only needs to be provided if Smart Lock is being
  // enabled. To be exact, this means a valid |auth_token| must be passed if
  // |feature| == EASY_UNLOCK_CLIENT and |enabled| == true, or
  // |feature| == BETTER_TOGETHER_CLIENT, |enabled| == true, and the pref for
  // Smart Lock is already enabled.
  SetFeatureEnabledState(Feature feature, bool enabled, string? auth_token) =>
      (bool success);

  // Provides the states of all Features.
  GetFeatureStates() => (map<Feature, FeatureState> feature_states_map);

  // Retries the most recent SetHostDevice() call.
  //
  // If the current status is
  // HostStatus::kHostSetLocallyButWaitingForBackendConfirmation, this function
  // retries the network attempt to set the device on the back-end. If the
  // current status is HostStatus::kHostSetButNotYetVerified, this function
  // retries the verification step. Both of these cases return true to the
  // caller.
  //
  // If the current status is any other value, this function is not applicable,
  // and false is returned to the caller.
  RetrySetHostNow() => (bool success);

  // Triggers an event to be dispatched by the service. This API function is
  // intended to be used only for debugging in the chrome://proximity-auth page.
  // During normal usage, events are triggered internally within the service.
  TriggerEventForDebugging(EventTypeForDebugging type) => (bool success);
};