naiveproxy/ash/public/interfaces/cros_display_config.mojom

// Copyright 2018 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

module ash.mojom;

import "ui/gfx/geometry/mojo/geometry.mojom";
import "ui/display/mojo/display.mojom";

// All points, bounds, and insets are in display pixels unless otherwise
// sepcified.

// SetDisplayLayoutInfo or SetDisplayProperties result.
enum DisplayConfigResult {
  kSuccess = 0,
  kInvalidOperationError,
  kInvalidDisplayIdError,
  kUnifiedNotEnabledError,
  kPropertyValueOutOfRangeError,
  kNotSupportedOnInternalDisplayError,
  kNegativeValueError,
  kSetDisplayModeError,
  kInvalidDisplayLayoutError,
  kMirrorModeSingleDisplayError,
  kMirrorModeSourceIdError,
  kMirrorModeDestIdError,
  kCalibrationNotAvailableError,
  kCalibrationNotStartedError,
  kCalibrationInProgressError,
  kCalibrationInvalidDataError,
  kCalibrationFailedError,
};

// Describes how the displays are laid out.
enum DisplayLayoutMode {
  // In normal mode displays are laid out as described by
  // DisplayLayoutInfo.layouts.
  kNormal = 0,
  // In unified desktop mode, a single desktop will be stretched across all
  // available displays.
  kUnified,
  // In mirrored mode, the display defined by DisplayLayoutInfo.mirrorSourceId
  // will be mirrored in the displays defined by
  // DisplayLayoutInfo.mirrorDestinationIds, or in all other displays if
  // mirrorDestinationIds is empty.
  kMirrored
};

// Describes a display edge.
enum DisplayLayoutPosition {
  kTop = 0,
  kRight,
  kBottom,
  kLeft
};

// Describes an overscan or touch calibration operation.
enum DisplayConfigOperation {
  kStart = 0,
  kAdjust,
  kReset,
  kComplete,
  kShowNative,
};

// Defines a pair of display + touch points used for touch calibration.
struct TouchCalibrationPair {
  // The coordinates of the display point.
  gfx.mojom.Point display_point;
  // The coordinates of the touch point corresponding to the display point.
  gfx.mojom.Point touch_point;
};

// Defines the data required for touch calibration.
struct TouchCalibration {
  // Must contain exactly four pairs of touch calibration points.
  array<TouchCalibrationPair> pairs;
  // Width and height of the display area when the touch calibration was
  // performed.
  gfx.mojom.Size bounds;
};

// Defines the layout of a single display.
struct DisplayLayout {
  // The unique identifier of the display.
  string id;
  // The unique identifier of the parent display. Empty for the root display.
  string parent_id;
  // The edge of the display that is shared with the parent display. Ignored for
  // the root display.
  DisplayLayoutPosition position;
  // The offset of the display along the connected edge. 0 indicates that
  // the topmost or leftmost corner is aligned.
  int32 offset;
};

// Defines the layout mode and details.
struct DisplayLayoutInfo {
  // The layout mode to use, see DisplayLayoutMode for details.
  DisplayLayoutMode layout_mode;
  // Ignored if If layout_mode is not kMirrored. Otherwise, if provided,
  // specifies the unique identifier of the source display for mirroring. If
  // not provided, mirror_destination_ids will be ignored and default ('normal')
  // mirrored mode will be enabled.
  string? mirror_source_id;
  // Ignored if layout_mode is not kMirrored. Otherwise, if provided, specifies
  // the unique identifiers of the displays to mirror the source display. If not
  // provided or empty, all displays will mirror the source display.
  array<string>? mirror_destination_ids;
  // An array of layouts describing a directed graph of displays. Required if
  // layout_mode is kNormal or kMirrored and not all displays are mirrored
  // ('mixed' mode). Ignored if layout_mode is kUnified.
  array<DisplayLayout>? layouts;
};

// EDID extracted parameters. Field description refers to "VESA ENHANCED
// EXTENDED DISPLAY IDENTIFICATION DATA STANDARD (Defines EDID Structure
// Version 1, Revision 4)" Release A, Revision 2 September 25, 2006.
// https://www.vesa.org/vesa-standards
struct Edid {
  // Three character manufacturer code, Sec. 3.4.1 page 21.
  string manufacturer_id;
  // Two byte manufacturer-assigned code, Sec. 3.4.2 page 21.
  string product_id;
  // Year of manufacture. Sec. 3.4.4 page 22.
  int32 year_of_manufacture;
};

// Struct wrapper so that the property can be optional.
struct DisplayRotation {
  display.mojom.Rotation rotation;
};

// Defines the properties for a display mode, i.e. a valid size and scale.
struct DisplayMode {
  // The display mode size in device independent (user visible) pixels.
  gfx.mojom.Size size;
  // The display mode size in native pixels.
  gfx.mojom.Size size_in_native_pixels;
  // The display mode UI scale factor.
  double ui_scale;
  // The display mode device scale factor.
  double device_scale_factor;
  // The display mode refresh rate in hertz.
  double refresh_rate;
  // True if the mode is the display's native mode.
  bool is_native;
};

// Defines the properties of an individual display, returned by
// GetDisplayLayoutInfo.
struct DisplayUnitInfo {
  // The unique identifier of the display.
  string id;
  // The user-friendly name (e.g. "Acme LCD monitor").
  string name;
  // EDID properties when available.
  Edid? edid;
  // True if this is the primary display.
  bool is_primary;
  // True if this is an internal display.
  bool is_internal;
  // True if this display is enabled.
  bool is_enabled;
  // True when the display is in tablet mode.
  bool is_tablet_mode;
  // True if this display has a touch input device associated with it.
  bool has_touch_support;
  // True if this display has an accelerometer associated with it.
  bool has_accelerometer_support;
  // The number of pixels per inch along the x-axis.
  double dpi_x;
  // The number of pixels per inch along the y-axis.
  double dpi_y;
  // The display's clockwise rotation.
  display.mojom.Rotation rotation;
  // The display's logical bounds.
  gfx.mojom.Rect bounds;
  // The display's ovserscan insets within its screen's bounds.
  gfx.mojom.Insets overscan;
  // The usable work area of the display within the display bounds. Excludes
  // areas of the display reserved for the OS, e.g. the taskbar and launcher.
  gfx.mojom.Rect work_area;
  // The index of the selected display mode.
  int32 selected_display_mode_index;
  // The list of available display modes.
  array<DisplayMode> available_display_modes;
  // The ratio between the display's current and default zoom. i.e. 1.0 is
  // is equivalent to 100% zoom, and value 1.5 is equivalent to 150% zoom.
  double display_zoom_factor;
  // The list of allowed zoom factor values for the display.
  array<double> available_display_zoom_factors;
};

// Properties for configuring an individual display, used in
// SetDisplayProperties.
struct DisplayConfigProperties {
  // If true, makes the display primary. No-op if set to false.
  bool set_primary;
  // If provided, sets the display's overscan insets to the provided value.
  // Note: overscan values may not be negative or larger than a half of the
  // screen's size. Overscan cannot be changed on the internal monitor.
  gfx.mojom.Insets? overscan;
  // If provided updates the display's rotation.
  DisplayRotation? rotation;
  // If provided, updates the display's logical bounds origin. Note: when
  // updating the display origin, some constraints will be applied. so the final
  // bounds origin may be different than the one set. The actual bounds will be
  // reflected in DisplayUnitInfo. Cannot be changed on the primary display (or
  // if set_primary is true).
  gfx.mojom.Point? bounds_origin;
  // If non zero, updates the zoom associated with the display. This zoom
  // performs relayout and repaint thus resulting in a better quality zoom than
  // just performing a pixel by pixel stretch enlargement.
  double display_zoom_factor;
  // Optional DisplayMode properties to set. This should match one of the
  // modes listed in DisplayUnitInfo.available_display_modes. Other custom
  // modes may or may not be valid.
  DisplayMode? display_mode;
};

// Interface for configuring displays in Chrome OS. Currently this is
// implemented in Ash through classes owned by ash::Shell, but the interface
// should not have any Ash specific dependencies.
interface CrosDisplayConfigController {
  // Observers are notified when the display layout or any display properties
  // change.
  AddObserver(associated CrosDisplayConfigObserver observer);

  // Returns the display layout info, including the list of layouts.
  GetDisplayLayoutInfo() => (DisplayLayoutInfo info);

  // Sets the layout mode, mirroring, and layouts. Returns kSuccess if the
  // layout is valid or an error value otherwise.
  SetDisplayLayoutInfo(DisplayLayoutInfo info) => (DisplayConfigResult result);

  // Returns the properties for all displays. If |single_unified| is true, a
  // single display will be returned if the display layout is in unifed mode.
  GetDisplayUnitInfoList(bool single_unified) =>
    (array<DisplayUnitInfo> info_list);

  // Sets |properties| for individual display with identifier |id|. Returns
  // Success if the properties are valid or an error value otherwise.
  SetDisplayProperties(string id, DisplayConfigProperties properties) =>
    (DisplayConfigResult result);

  // Enables or disables unified desktop mode. If the current display mode is
  // kMirrored the mode will not be changed, if it is kNormal then the mode will
  // be set to kUnified.
  SetUnifiedDesktopEnabled(bool enabled);

  // Starts, updates, completes, or resets overscan calibration for the display
  // with identifier |display_id|. If |op| is kAdjust, |delta| describes the
  // amount to change the overscan value. Runs the callback after performing the
  // operation or on error.
  OverscanCalibration(string display_id,
                      DisplayConfigOperation op,
                      gfx.mojom.Insets? delta) => (DisplayConfigResult result);

  // Starts, completes, or resets touch calibration for the display with
  // identifier |display_id|. If |op| is kShowNative shows the native
  // calibration UI. Runs the callback after performing the operation or on
  // error.
  TouchCalibration(string display_id,
                   DisplayConfigOperation op,
                   TouchCalibration? calibration) =>
    (DisplayConfigResult result);
};

// Interface for clients needing to be informed when the display configuration
// changes.
interface CrosDisplayConfigObserver {
  // Called any time the display configuration changes.
  OnDisplayConfigChanged();
};