From 72aedb96382f1252fd84dc01b56d3a4b6276a3ec Mon Sep 17 00:00:00 2001 From: Erik Ekman Date: Thu, 16 Jul 2009 09:12:20 +0000 Subject: [PATCH] Update readme and manpage --- README | 20 +++++++++++++++----- man/iodine.8 | 7 +++++++ 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/README b/README index cc201ad..62cc771 100644 --- a/README +++ b/README @@ -64,15 +64,25 @@ be able to ping the other end of the tunnel from either side. MISC. INFO: -Try experimenting with the MTU size (-m option) to get maximum bandwidth. It is -set to 1024 by default, which seems to work with most DNS servers. If you have -problems, try setting it to 220 as this ensures all packets to be < 512 bytes. -Some DNS servers enforce a 512 byte packet limit, and this is probably the case -if you can ping through the tunnel but not login via SSH. +Routing: +The normal case is to route all traffic through the DNS tunnel. To do this, first +add a route to the nameserver you use with the default gateway as gateway. Then +replace the default gateway with the servers IP address within the DNS tunnel, +and configure the server to do NAT. + +MTU issues: +These issues should be solved now, with automatic fragmentation of downstream +packets. There should be no need to set the MTU explicitly on the server. If you have problems, try inspecting the traffic with network monitoring tools and make sure that the relaying DNS server has not cached the response. A cached error message could mean that you started the client before the server. +The -D option on the server can also show received and sent queries. + +The iodined server replies to NS requests sent for subdomains of the tunnel +domain. If your domain is tunnel.com, send a NS request for foo.tunnel.com +to see if the delegation works. dig is a good tool for this: +dig -t NS foo123.tunnel.com The upstream data is sent gzipped encoded with Base32, or Base64 if the relay server support '+' in domain names. DNS protocol allows one query per packet, diff --git a/man/iodine.8 b/man/iodine.8 index d83edac..1e55cab 100644 --- a/man/iodine.8 +++ b/man/iodine.8 @@ -229,6 +229,13 @@ add a route to the nameserver you use with the default gateway as gateway. Then replace the default gateway with the servers IP address within the DNS tunnel, and configure the server to do NAT. .TP +.B Troubleshooting: +Use the \-D option on the server to show received and sent queries, or a +tool like Wireshark/tcpdump. The iodined server replies to NS requests sent for +subdomains of the tunnel domain. If your domain is tunnel.com, send a NS +request for foo.tunnel.com to see if the delegation works. dig is a good tool +for this: dig \-t NS foo123.tunnel.com +.TP .B MTU issues: These issues should be solved now, with automatic fragmentation of downstream packets. There should be no need to set the MTU explicitly on the server.