Applied patch from #88, thanks a lot!

2024-11-25 06:26:05 +03:00 · 2009-12-29 20:00:57 +00:00 · 2009-12-29 20:00:57 +00:00 · 35bd6f744f
commit 35bd6f744f
parent 4d42dbd879
19 changed files with 2813 additions and 1054 deletions
--- a/299
+++ b/299
@ -11,12 +11,12 @@ firewalled, but DNS queries are allowed.
 QUICKSTART:
 Try it out within your own LAN! Follow these simple steps:
- On your server, run: ./iodined -f 10.0.0.1 test.asdf
+- On your server, run: ./iodined -f 10.0.0.1 test.com
  (If you already use the 10.0.0.0 network, use another internal net like 
  172.16.0.0)
 - Enter a password
- On the client, run: ./iodine -f 192.168.0.1 test.asdf
+- On the client, run: ./iodine -f -r 192.168.0.1 test.com
-  (Replace 192.168.0.1 with the server's ip address)
+  (Replace 192.168.0.1 with your server's ip address)
 - Enter the same password
 - Now the client has the tunnel ip 10.0.0.2 and the server has 10.0.0.1
 - Try pinging each other through the tunnel
@ -26,113 +26,196 @@ To actually use it through a relaying nameserver, see below.
 HOW TO USE:
 Note: server and client are required to speak the exact same protocol. In most
 cases, this means running the same iodine version. Unfortunately, implementing
 backward and forward protocol compatibility is usually not feasible.
 Server side:
-To use this tunnel, you need control over a real domain (like mytunnel.com),
+To use this tunnel, you need control over a real domain (like mydomain.com),
-and a server with a public IP number. If the server already runs a DNS
+and a server with a public IP address to run iodined on. If this server
-server, change the listening port and then use the -b option to let
+already runs a DNS program, change its listening port and then use iodined's
-iodined forward the DNS requests. Then, delegate a subdomain 
+-b option to let iodined forward the DNS requests. (Note that this procedure
-(say, tunnel1.mytunnel.com) to the server. If you use BIND for the domain, 
+is not advised in production environments, because iodined's DNS forwarding
-add these lines to the zone file:
+is not completely transparent.)
-tunnel1host	IN	A	10.15.213.99
+Then, delegate a subdomain (say, t1.mydomain.com) to the iodined server.
-tunnel1		IN	NS	tunnel1host.mytunnel.com.
+If you use BIND for your domain, add two lines like these to the zone file:
-Do not use CNAME instead of A above.
+t1		IN	NS	t1ns.mydomain.com.		; note the dot!
-If your server has a dynamic IP, use a dynamic dns provider:
+t1ns		IN	A	10.15.213.99
-tunnel1         IN      NS      tunnel1host.mydyndnsprovider.com
+The "NS" line is all that's needed to route queries for the "t1" subdomain
 to the "t1ns" server. We use a short name for the subdomain, to keep as much
 space as possible available for the data traffic. At the end of the "NS" line
 is the name of your iodined server. This can be any name, pointing anywhere,
 but in this case it's easily kept in the same zone file. It must be a name
 (not an IP address), and that name itself must have an A record (not a CNAME).
-Now any DNS querys for domains ending with tunnel1.mytunnnel.com will be sent
+If your iodined server has a dynamic IP, use a dynamic dns provider. Simply
-to your server. Start iodined on the server. The first argument is the tunnel
+point the "NS" line to it, and leave the "A" line out:
-IP address (like 192.168.99.1) and the second is the assigned domain (in this
+
-case tunnel1.mytunnel.com). The -f argument will keep iodined running in the
+t1		IN	NS	myname.mydyndnsprovider.com.	; note the dot!
-foreground, which helps when testing. iodined will start a virtual interface,
+
-and also start listening for DNS queries on UDP port 53. Either enter a
+Then reload or restart your nameserver program. Now any DNS queries for
-password on the commandline (-P pass) or after the server has started. Now 
+domains ending in t1.mydomain.com will be sent to your iodined server.
-everything is ready for the client.
+
 Finally start iodined on your server. The first argument is the IP address
 inside the tunnel, which can be from any range that you don't use yet (for
 example 192.168.99.1), and the second argument is the assigned domain (in this
 case t1.mydomain.com). Using the -f option will keep iodined running in the
 foreground, which helps when testing. iodined will open a virtual interface
 ("tun device"), and will also start listening for DNS queries on UDP port 53.
 Either enter a password on the commandline (-P pass) or after the server has
 started. Now everything is ready for the client.
 If there is a chance you'll be using an iodine tunnel from unexpected
 environments, start iodined with a -c option.
 Resulting commandline in this example situation:
 ./iodined -f -c -P secretpassword 192.168.99.1 t1.mydomain.com
 Client side: 
-All the setup is done, just start iodine. It takes up to two arguments, the
+All the setup is done, just start iodine. It takes one or two arguments, the
 first is the local relaying DNS server (optional) and the second is the domain
-used (tunnel1.mytunnnel.com). If DNS queries are allowed to any computer, you
+you used (t1.mydomain.com). If you don't specify the first argument, the
-can use the tunnel endpoint (example: 10.15.213.99 or tunnel1host.mytunnel.com)
+system's current DNS setting will be consulted.
-as the first argument. The tunnel interface will get an IP close to the servers
+
-(in this case 192.168.99.2) and a suitable MTU.  Enter the same password as on
+If DNS queries are allowed to any computer, you can directly give the iodined
-the server either by argument or after the client has started. Now you should
+server's address as first argument (in the example: t1ns.mydomain.com or
-be able to ping the other end of the tunnel from either side.  
+10.15.213.99). In that case, it may also happen that _any_ traffic is allowed
 to the DNS port (53 UDP) of any computer. Iodine will detect this, and switch
 to raw UDP tunneling if possible. To force DNS tunneling in any case, use the
 -r option (especially useful when testing within your own network).
 The client's tunnel interface will get an IP close to the server's (in this
 case 192.168.99.2 or .3 etc.) and a suitable MTU. Enter the same password as
 on the server either as commandline option or after the client has started.
 Using the -f option will keep the iodine client running in the foreground.
 Resulting commandline in this example situation:
 ./iodine -f -P secretpassword t1.mydomain.com
 (add -r to force DNS tunneling even if raw UDP tunneling would be possible)
 From either side, you should now be able to ping the IP address on the other
 end of the tunnel. In this case, ping 192.168.99.1 from the iodine client, and
 192.168.99.2 or .3 etc. from the iodine server.
 MISC. INFO:
 Routing:
-The normal case is to route all traffic through the DNS tunnel. To do this, first
+It is possible to route all traffic through the DNS tunnel. To do this, first
-add a route to the nameserver you use with the default gateway as gateway. Then
+add a host route to the nameserver used by iodine over the wired/wireless
-replace the default gateway with the servers IP address within the DNS tunnel,
+interface with the default gateway as gateway. Then replace the default
-and configure the server to do NAT.
+gateway with the iodined server's IP address inside the DNS tunnel, and
 configure the server to do NAT.
 However, note that the tunneled data traffic is not encrypted at all, and can
 be read and changed by external parties relatively easily. For maximum
 security, run a VPN through the DNS tunnel (=double tunneling), or use secure
 shell (SSH) access, possibly with port forwarding. The latter can also be used
 for web browsing, when you run a web proxy (for example Privoxy) on your
 server.
 Testing:
 The iodined server replies to NS requests sent for subdomains of the tunnel
 domain. If your iodined subdomain is t1.mydomain.com, send a NS request for
 foo123.t1.mydomain.com to see if the delegation works. dig is a good tool
 for this:
 dig -t NS foo123.t1.mydomain.com
 Also, the iodined server will answer requests starting with 'z' for any of the
 supported request types, for example:
 dig -t TXT z456.t1.mydomain.com
 dig -t SRV z456.t1.mydomain.com
 dig -t CNAME z456.t1.mydomain.com
 The reply should look like garbled text in all these cases.
 Operational info:
 The DNS-response fragment size is normally autoprobed to get maximum bandwidth.
 To force a specific value (and speed things up), use the -m option.
-The iodined server replies to NS requests sent for subdomains of the tunnel
+The DNS hostnames are normally used up to their maximum length, 255 characters.
-domain. If your domain is tunnel.com, send a NS request for foo.tunnel.com
+Some DNS relays have been found that answer full-length queries rather
-to see if the delegation works. dig is a good tool for this:
+unreliably, giving widely varying (and mostly very bad) results of the
-dig -t NS foo123.tunnel.com
+fragment size autoprobe on repeated tries. In these cases, use the -M switch
 to reduce the DNS hostname length to for example 200 characters, which makes
 these DNS relays much more stable. This is also useful on some "de-optimizing"
 DNS relays that stuff the response with two full copies of the query, leaving
 very little space for downstream data (also not capable of EDNS0). The -M
 switch can trade some upstream bandwidth for downstream bandwidth. Note that
 the minimum -M value is about 100, since the protocol can split packets (1200
 bytes max) in only 16 fragments, requiring at least 75 real data bytes per
 fragment.
-The upstream data is sent gzipped encoded with Base32, or Base64 if the relay
+The upstream data is sent gzipped encoded with Base32; or Base64 if the relay
-server support '+' in domain names. DNS protocol allows one query per packet,
+server supports mixed case and '+' in domain names; or Base64u if '_' is
-and one query can be max 256 chars. Each domain name part can be max 63 chars.
+supported instead; or Base128 if high-byte-value characters are supported.
-So your domain name and subdomain should be as short as possible to allow
+This upstream encoding is autodetected. The DNS protocol allows one query per
-maximum upstream throughput.
+packet, and one query can be max 256 chars. Each domain name part can be max
 63 chars. So your domain name and subdomain should be as short as possible to
 allow maximum upstream throughput.
-The default is to use DNS NULL-type queries, as this provides the largest
+Several DNS request types are supported, with the NULL type expected to provide
-downstream bandwidth. If your DNS server blocks NULL requests, try TXT or
+the largest downstream bandwidth. Other available types are TXT, SRV, MX,
-CNAME queries via the -T option. Also supported are A (returning CNAME) and
+CNAME and A (returning CNAME), in decreasing bandwidth order. Normally the
-MX requests, but these may/will cause additional lookups by "smart" caching
+"best" request type is autodetected and used. However, DNS relays may impose
-nameservers to get an actual IP address, which may either slow down or fail
+limits on for example NULL and TXT, making SRV or MX actually the best choice.
-completely. DNS responses for non-NULL are Base32 encoded by default, which
+This is not autodetected, but can be forced using the -T option. It is
-should always work. For more bandwidth, try Base64 or Raw (TXT only) via the
+advisable to try various alternatives especially when the autodetected request
-O option. If Base64/Raw doesn't work, you'll see many failures in the
+type provides a downstream fragment size of less than 200 bytes.
-fragment size autoprobe.
+
 Note that SRV, MX and A (returning CNAME) queries may/will cause additional
 lookups by "smart" caching nameservers to get an actual IP address, which may
 either slow down or fail completely.
 DNS responses for non-NULL queries can be encoded with the same set of codecs
 as upstream data. This is normally also autodetected, but no fully exhaustive
 tests are done, so some problems may not be noticed when selecting more
 advanced codecs. In that case, you'll see failures/corruption in the fragment
 size autoprobe. In particular, several DNS relays have been found that change
 replies returning hostnames (SRV, MX, CNAME, A) to lowercase only when that
 hostname exceeds ca. 180 characters. In these and similar cases, use the -O
 option to try other downstream codecs; Base32 should always work.
 Normal operation now is for the server to _not_ answer a DNS request until
 the next DNS request has come in, a.k.a. being "lazy". This way, the server
 will always have a DNS request handy when new downstream data has to be sent.
 This greatly improves (interactive) performance and latency, and allows to
-slow down the quiescent ping requests to 4 second intervals by default.
+slow down the quiescent ping requests to 4 second intervals by default, and
-In fact, the main purpose of the pings now is to force a reply to the previous
+possibly much slower. In fact, the main purpose of the pings now is to force
-ping, and prevent DNS server timeouts (usually 5-10 seconds per RFC1035).
+a reply to the previous ping, and prevent DNS server timeouts (usually at
-In the unlikely case that you do experience DNS server timeouts (SERVFAIL),
+least 5-10 seconds per RFC1035). Some DNS servers are more impatient and will
-decrease the -I option to 1. If you are running on a local network without
+give SERVFAIL errors (timeouts) in periods without tunneled data traffic. All
-any DNS server in-between, try -I 50 (iodine and iodined time out after 60
+data should still get through in these cases, but iodine will reduce the ping
-seconds). The only time you'll notice a slowdown, is when DNS reply packets
+interval to 1 second anyway (-I1) to reduce the number of error messages. This
-go missing; the iodined server then has to wait for a new ping to re-send the
+may not help for very impatient DNS relays like dnsadvantage.com (ultradns),
-data. You can speed this up by generating some upstream traffic (keypress,
+which time out in 1 second or even less. Yet data will still get trough, and
-ping). If this happens often, check your network for bottlenecks and/or run
+you can ignore the SERVFAIL errors.
 with -I1 .
-Some DNS servers appear to be quite impatient and start retrying DNS requests
+If you are running on a local network without any DNS server in-between, try
-(with _different_ DNS ids!) when an answer does not appear within a few
+-I 50 (iodine and iodined close the connection after 60 seconds of silence).
-milliseconds. Usually they scale back retries when iodined's lazy mode
+The only time you'll notice a slowdown, is when DNS reply packets go missing;
-repeatedly takes several seconds to answer; and they scale up retries again
+the iodined server then has to wait for a new ping to re-send the data. You can
-when iodined answers fast during heavy data transfer. Some commercial DNS
+speed this up by generating some upstream traffic (keypress, ping). If this
-servers advertise this as "carrier-grade adaptive retransmission techniques".
+happens often, check your network for bottlenecks and/or run with -I1.
 The effect will only be visible in the network traffic at the iodined server,
 and will not affect the client's connection. Iodined has rather elaborate
 logic to deal with (i.e., ignore) these unwanted duplicates.
-Other DNS servers, notably the opendns.com network, seem to regard iodined's
+The delayed answering in lazy mode will cause some "carrier grade" commercial
-lazyness as incompetency, and will start shuffling requests around, possibly
+DNS relays to repeatedly re-send the same DNS query to the iodined server.
-in an attempt to reduce iodined's workload. The resulting out-of-sequence DNS
+If the DNS relay is actually implemented as a pool of parallel servers,
-traffic works quite badly for lazy mode. The iodine client will detect this,
+duplicate requests may even arrive from multiple sources. This effect will
-and switch back to legacy mode ("immediate ping-pong") automatically. In these
+only be visible in the network traffic at the iodined server, and will not
-cases, start the iodine client with -L0 to prevent it from operating in lazy
+affect the client's connection. Iodined will notice these duplicates, and send
-mode altogether. Note that this will negatively affect interactive performance
+the same answer (when its time has come) to both the original query and the
-and latency, especially in the downstream direction.
+latest duplicate. After that, the full answer is cached for a short while.
 Delayed duplicates that arrive at the server even later, get a reply that the
 iodine client will ignore (if it ever arrives there).
 If you have problems, try inspecting the traffic with network monitoring tools
-and make sure that the relaying DNS server has not cached the response. A
+like tcpdump or ethereal/wireshark, and make sure that the relaying DNS server
-cached error message could mean that you started the client before the server.
+has not cached the response. A cached error message could mean that you
-The -D (and -DD) option on the server can also show received and sent queries.
+started the client before the server. The -D (and -DD) option on the server
 can also show received and sent queries.
 TIPS & TRICKS:
@ -165,13 +248,16 @@ PERFORMANCE:
 This section tabulates some performance measurements. To view properly, use
 a fixed-width font like Courier.
-Measurements were done in protocol 00000500 with lazy mode unless indicated
+Measurements were done in protocol 00000502 in lazy mode; upstream encoding
-otherwise. Upstream encoding always Base64.
+always Base128; iodine -M255; iodined -m1130. Network conditions were not
 extremely favorable; results are not benchmarks but a realistic indication of
 real-world performance that can be expected in similar situations.
 Upstream/downstream throughput was measured by scp'ing a file previously
 read from /dev/urandom (i.e. incompressible), and measuring size with
 "ls -l ; sleep 30 ; ls -l" on a separate non-tunneled connection. Given the
 large scp block size of 16 kB, this gives a resolution of 4.3 kbit/s, which
-explains why many values are exactly equal.
+explains why some values are exactly equal.
 Ping round-trip times measured with "ping -c100", presented are average rtt
 and mean deviation (indicating spread around the average), in milliseconds.
@ -185,43 +271,28 @@ Laptop  ->   Wifi AP   ->  Home server  ->  DSL provider  ->  Datacenter
 ------------------------------------------------------------------------------
 iodine -> Wifi AP :53
-  -Tnull (= -Oraw)           982    39.3    148.5   26.7    3.1   26.6    3.0
+  -Tnull (= -Oraw)           982    43.6    131.0   28.0    4.6   26.8    3.4
 iodine -> Home server :53
-  -Tnull (= -Oraw)          1174    43.6    174.7   25.2    4.0   25.5    3.4
+  -Tnull (= -Oraw)          1174    48.0    305.8   26.6    5.0   26.9    8.4
 iodine -> DSL provider :53  
-  -Tnull (= -Oraw)          1174    52.4    200.9   20.3    3.2   20.3    2.7
+  -Tnull (= -Oraw)          1174    56.7    367.0   20.6    3.1   21.2    4.4
-  -Ttxt -Obase32             730    52.4    192.2*
+  -Ttxt -Obase32             730    56.7    174.7*
-  -Ttxt -Obase64             874    52.4    192.2
+  -Ttxt -Obase64             874    56.7    174.7
-  -Ttxt -Oraw               1162    52.4    192.2
+  -Ttxt -Obase128           1018    56.7    174.7
-  -Tcname -Obase32           148    52.4     48.0
+  -Ttxt -Oraw               1162    56.7    358.2
-  -Tcname -Obase64           181    52.4     61.1
+  -Tsrv -Obase128            910    56.7    174.7
  -Tcname -Obase32           151    56.7     43.6
  -Tcname -Obase128          212    56.7     52.4
 iodine -> DSL provider :53  
-  wired (no Wifi) -Tnull    1174    65.5    244.6   17.7    1.9   17.8    1.6
+  wired (no Wifi) -Tnull    1174    74.2    585.4   20.2    5.6   19.6    3.4
- [192.2* : nice, because still 2frag/packet]
+ [174.7* : these all have 2frag/packet]
 Situation 2:
 Laptop -> (wire) -> (Home server) -> (DSL) ->  opendns.com ->  Datacenter
 iodine                                         DNS cache       iodined
                        downstr.  upstream downstr.  ping-up       ping-down
                        fragsize   kbit/s   kbit/s  avg +/-mdev   avg +/-mdev
 ------------------------------------------------------------------------------
 iodine -> opendns.com :53
  -Tnull -L1 (lazy mode)     230      -        -   404.4  196.2  663.8  679.6
                                                    (20% lost)     (2% lost)
  -Tnull -L0 (legacy mode)   230     5.6      7.4  197.3    4.7  610.8  323.5
 [Note: Throughput measured over 300 seconds to get better resolution]
 Situation 3:
 Laptop  ->  Wifi+vpn / wired  ->  Home server
 iodine                            iodined
@ -229,9 +300,9 @@ Laptop  ->  Wifi+vpn / wired  ->  Home server
                        fragsize   kbit/s   kbit/s  avg +/-mdev   avg +/-mdev
 ------------------------------------------------------------------------------
-wifi + openvpn  -Tnull      1186   183.5    611.6    5.7    1.4    7.0    2.7
+wifi + openvpn  -Tnull      1186   166.0   1022.3    6.3    1.3    6.6    1.6
-wired  -Tnull               1186   685.9   2350.5    1.3    0.1    1.4    0.4
+wired  -Tnull               1186   677.2   2464.1    1.3    0.2    1.3    0.1
 Performance is strongly coupled to low ping times, as iodine requires
--- a/doc/proto_00000502.txt
+++ b/doc/proto_00000502.txt
@ -1,4 +1,4 @@
-Detailed specification of protocol in version 00000501
+Detailed specification of protocol in version 00000502
 ======================================================
 Note: work in progress!!
@ -7,6 +7,22 @@ Note: work in progress!!
 1. DNS protocol
 ======================================================
 Quick alphabetical index / register:
 	0-9	Data packet
 	A-F	Data packet
 	I	IP address
 	L	Login
 	N	Downstream fragsize	(NS.topdomain A-type reply)
 	O	Options
 	P	Ping
 	R	Downstream fragsize probe
 	S	Switch upstream codec
 	V	Version
 	W				(WWW.topdomain A-type reply)
 	Y	Downstream codec check
 	Z	Upstream codec check
 CMC = 2 byte Cache Miss Counter, increased every time it is used
 Version:
@ -38,29 +54,55 @@ IP Request:
 Client sends:
 	First byte i or I
 	5 bits coded as Base32 char, meaning userid
-	CMC
+	CMC as 3 Base32 chars
 Server replies
 	BADIP if bad userid, or
 	I and then 4 bytes network order external IP address of iodined server
-Case check:
+Upstream codec check / bounce:
 Client sends: 
 	First byte z or Z
 	Lots of data that should not be decoded
 Server replies:
-	The requested domain copied raw
+	The requested domain copied raw, in the lowest-grade downstream codec
 	available for the request type.
 Downstream codec check:
 Client sends:
 	First byte y or Y
 	1 char, meaning downstream codec to use
 	5 bits coded as Base32 char, meaning check variant
 	CMC as 3 Base32 chars
 	Possibly extra data, depending on check variant
 Server sends:
 	Data encoded with requested downstream codec; data content depending
 	on check variant number.
 	BADCODEC if requested downstream codec not available.
 	BADLEN if check variant is not available, or problem with extra data.
 	Downstream codec chars are same as in 'O' Option request, below.
 	Check variants:
 	1: Send encoded DOWNCODECCHECK1 string as defined in encoding.h
 	(Other variants reserved; possibly variant that sends a decoded-encoded
 	copy of Base32-encoded extra data in the request)
 Switch codec:
 Client sends:
 	First byte s or S
 	5 bits coded as Base32 char, meaning userid
-	5 bits coded as Base32 char, with value 5 or 6, representing number of raw
+	5 bits coded as Base32 char, representing number of raw bits per
-	bits per encoded byte
+	encoded byte:
-	CMC
+		5: Base32   (a-z0-5)
 		6: Base64   (a-zA-Z0-9+-)
 		26: Base64u (a-zA-Z0-9_-)
 		7: Base128  (a-zA-Z0-9\274-\375)
 	CMC as 3 Base32 chars
 Server sends:
 	Name of codec if accepted. After this all upstream data packets must 
 	be encoded with the new codec.
-	BADCODEC if not accepted. Client must then revert to Base32
+	BADCODEC if not accepted. Client must then revert to previous codec
 	BADLEN if length of query is too short
 Options:
@ -68,6 +110,7 @@ Client sends:
 	First byte o or O
 	5 bits coded as Base32 char, meaning userid
 	1 char, meaning option
 	CMC as 3 Base32 chars
 Server sends:
 	Full name of option if accepted. After this, option immediately takes
 	effect in server.
@ -77,6 +120,8 @@ Server sends:
 	Option chars:
 	t or T: Downstream encoding Base32, for TXT/CNAME/A/MX (default)
 	s or S: Downstream encoding Base64, for TXT/CNAME/A/MX
 	u or U: Downstream encoding Base64u, for TXT/CNAME/A/MX
 	v or V: Downstream encoding Base128, for TXT/CNAME/A/MX
 	r or R: Downstream encoding Raw, for TXT/NULL (default for NULL)
 	If codec unsupported for request type, server will use Base32; note
 	that server will answer any mix of request types that a client sends.
@ -96,8 +141,10 @@ Client sends:
 		meaning 4 bits userid, 11 bits fragment size
 	Then follows a long random query which contents does not matter
 Server sends:
-	Requested number of bytes as a response. The first two bytes contains
+	Requested number of bytes as a response. The first two bytes contain
-	the requested length. Rest of message can be any data.
+	the requested length. The third byte is 107 (0x6B). The fourth byte
 	is a random value, and each following byte is incremented with 107.
 	This is checked by the client to determine corruption.
 	BADFRAG if requested length not accepted.
 Set downstream fragment size:
@ -114,10 +161,10 @@ Server sends:
 Data:
 Upstream data header:
-	 3210 432 10 43 210 4321 0
+	 3210 432 10 43 210 4321 0 43210
-	+----+---+--+--+---+----+-+
+	+----+---+--+--+---+----+-+-----+
-	|UUUU|SSS|FF|FF|DDD|GGGG|L|
+	|UUUU|SSS|FF|FF|DDD|GGGG|L|UDCMC|
-	+----+---+--+--+---+----+-+
+	+----+---+--+--+---+----+-+-----+
 Downstream data header:
 	 7 654 3210 765 4321 0
@ -132,9 +179,11 @@ FFFF = Upstream fragment number
 DDD = Downstream packet sequence number
 GGGG = Downstream fragment number
 C = Compression enabled for downstream packet
 UDCMC = Upstream Data CMC, 36 steps a-z0-9, case-insensitive
-Upstream data packet starts with 1 byte ASCII hex coded user byte, then 3 bytes 
+Upstream data packet starts with 1 byte ASCII hex coded user byte; then 3 bytes 
-Base32 encoded header, then comes the payload data, encoded with chosen codec.
+Base32 encoded header; then 1 char data-CMC; then comes the payload data,
 encoded with the chosen upstream codec.
 Downstream data starts with 2 byte header. Then payload data, which may be
 compressed.
@ -147,10 +196,18 @@ TXT:
 	<=255 bytes)
 	t or T: Base32	 encoded before chop, decoded after un-chop
 	s or S: Base64	 encoded before chop, decoded after un-chop
 	u or U: Base64u	 encoded before chop, decoded after un-chop
 	v or V: Base128	 encoded before chop, decoded after un-chop
 	r or R: Raw	 no encoding, only DNS-chop
-CNAME/A/MX:
+SRV/MX/CNAME/A:
 	h or H: Hostname encoded with Base32
 	i or I: Hostname encoded with Base64
 	j or J: Hostname encoded with Base64u
 	k or K: Hostname encoded with Base128
 SRV and MX may reply with multiple hostnames, each encoded separately. Each
 has a 10-multiple priority, and encoding/decoding is done in strictly
 increasing priority sequence 10, 20, 30, etc. without gaps. Note that some DNS
 relays will shuffle the answer records in the response.
 Ping:
 Client sends:
@ -162,10 +219,11 @@ Client sends:
 		4 bits downstream fragment
 	CMC
-The server response to Ping and Data packets is a DNS NULL type response:
+The server response to Ping and Data packets is a DNS NULL/TXT/.. type response,
-If server has nothing to send, data length is 0 bytes.
+always starting with the 2 bytes downstream data header as shown above.
-If server has something to send, it will send a downstream data packet, 
+If server has nothing to send, no data is added after the header.
-prefixed with 2 bytes header as shown above.
+If server has something to send, it will add the downstream data packet
 (or some fragment of it) after the header.
 "Lazy-mode" operation
--- a/man/iodine.8
+++ b/man/iodine.8
@ -1,5 +1,5 @@
 .\" groff -man -Tascii iodine.8
-.TH IODINE 8 "SEP 2009" "User Manuals"
+.TH IODINE 8 "DEC 2009" "User Manuals"
 .SH NAME
 iodine, iodined \- tunnel IPv4 over DNS
 .SH SYNOPSIS
@ -19,6 +19,8 @@ iodine, iodined \- tunnel IPv4 over DNS
 .I device
 .B ] [-m
 .I fragsize
 .B ] [-M
 .I namelen
 .B ] [-z
 .I context
 .B ] [-F
@ -84,6 +86,10 @@ downstream.
 is the client application,
 .B iodined
 is the server.
 Note: server and client are required to speak the exact same protocol. In most
 cases, this means running the same iodine version. Unfortunately, implementing
 backward and forward protocol compatibility is usually not feasible.
 .SH OPTIONS
 .SS Common Options:
 .TP
@ -127,49 +133,85 @@ will be sent to the server instead of the DNS relay.
 Force maximum downstream fragment size. Not setting this will cause the
 client to automatically probe the maximum accepted downstream fragment size.
 .TP
 .B -M namelen
 Maximum length of upstream hostnames, default 255.
 Usable range ca. 100 to 255.
 Use this option to scale back upstream bandwidth in favor of downstream
 bandwidth.
 Also useful for DNS servers that perform unreliably when using full-length
 hostnames, noticable when fragment size autoprobe returns very
 different results each time.
 .TP
 .B -T dnstype
-DNS request type.
+DNS request type override.
-.I NULL
+By default, autodetection will probe for working DNS request types, and
-is default. If this doesn't work, try
+will select the request type that is expected to provide the most bandwidth.
-.I TXT
+However, it may turn out that a DNS relay imposes limits that skew the
-(some less bandwidth) or
+picture, which may lead to an "unexpected" DNS request type providing
 more bandwidth.
 In that case, use this option to override the autodetection.
 In (expected) decreasing bandwidth order, the supported DNS request types are:
 .IR NULL ,
 .IR TXT ,
 .IR SRV ,
 .IR MX ,
 .I CNAME
-(much less bandwidth). Also supported are
+and
 .I A
-(returning CNAME) and
+(returning CNAME).
 Note that
 .IR SRV ,
 .I MX
-requests, but these may/will cause additional lookups by "smart" caching
+and
 .I A
 may/will cause additional lookups by "smart" caching
 nameservers to get an actual IP address, which may either slow down or fail
 completely.
 .TP
 .B -O downenc
-Downstream encoding for all query type responses except NULL.
+Force downstream encoding type for all query type responses except NULL.
 Default is autodetected, but may not spot all problems for the more advanced
 codecs.
 Use this option to override the autodetection.
 .I Base32
-is default and should always work.
+is the lowest-grade codec and should always work; this is used when
 autodetection fails.
 .I Base64
 provides more bandwidth, but may not work on all nameservers.
 .I Base64u
 is equal to Base64 except in using underscore ('_')
 instead of plus sign ('+'), possibly working where
 .I Base64
 does not.
 .I Base128
 uses high byte values (mostly accented letters in iso8859-1),
 which might work with some nameservers.
 For TXT queries,
 .I Raw
-will provide maximum performance. This will only work if the nameserver
+will provide maximum performance, but this will only work if the nameserver
 path is fully 8-bit-clean for responses that are assumed to be "legible text".
 .TP
 .B -L 0|1
 Lazy-mode switch.
-\-L1 (default): Use lazy mode if server supports it, for improved
+\-L1 (default): Use lazy mode for improved performance and decreased latency.
-performance and decreased latency.
+A very small minority of DNS relays appears to be unable to handle the
-Some DNS servers, notably the opendns.com network, appear unstable when
+lazy mode traffic pattern, resulting in no or very little data coming through.
-handling lazy mode DNS traffic and will re-order requests. If this occurs,
+The iodine client will detect this and try to switch back to legacy mode,
-you will notice fluctuating response speed in interactive sessions.
+but this may not always work.
-The iodine client will eventually detect this and switch back to legacy
+In these situations use \-L0 to force running in legacy mode
 mode automatically. Use \-L0 to force running in legacy mode
 (implies \-I1).
 .TP
 .B -I interval
 Maximum interval between requests (pings) so that intermediate DNS
 servers will not time out. Default is 4 in lazy mode, which will work
-fine in almost all cases. Decrease if you get SERVFAIL errors in periods
+fine in most cases. When too many SERVFAIL errors occur, iodine
-without tunneled data traffic. To get absolute minimum DNS traffic,
+will automatically reduce this to 1.
-increase well above 4 until SERVFAIL errors start to occur.
+To get absolute minimum DNS traffic,
 increase well above 4, but not so high that SERVFAIL errors start to occur.
 There are some DNS relays with very small timeouts,
 notably dnsadvantage.com (ultradns), that will give
 SERVFAIL errors even with \-I1; data will still get trough,
 and these errors can be ignored.
 Maximum useful value is 59, since iodined will close a client's
 connection after 60 seconds of inactivity.
 .SS Server Options:
@ -190,11 +232,16 @@ Increase debug level. Level 1 prints info about each RX/TX packet.
 Implies the
 .B -f
 option.
 On level 2 (-DD) or higher, DNS queries will be printed literally.
 When using Base128 upstream encoding, this is best viewed as
 ISO Latin-1 text instead of (illegal) UTF-8.
 This is easily done with : "LC_ALL=C luit iodined -DD ..."
 (see luit(1)).
 .TP
 .B -m mtu
 Set 'mtu' as mtu size for the tun device. 
 This will be sent to the client on login, and the client will use the same mtu
-for its tun device.  Default 1200.  Note that the DNS traffic will be
+for its tun device.  Default 1130.  Note that the DNS traffic will be
 automatically fragmented when needed.
 .TP
 .B -l listen_ip
@ -236,97 +283,22 @@ must be the same on both the client and the server.
 .SS Server Arguments:
 .TP
 .B tunnel_ip[/netmask]
-+This is the server's ip address on the tun interface. The client will be
+This is the server's ip address on the tun interface. The client will be
 given the next ip number in the range. It is recommended to use the 
 10.0.0.0 or 172.16.0.0 ranges. The default netmask is /27, can be overriden
 by specifying it here. Using a smaller network will limit the number of
 concurrent users.
 .TP
 .B topdomain
-+The dns traffic is expected to arrive as queries for
+The dns traffic is expected to arrive as queries for
 subdomains under 'topdomain'. This is normally a subdomain to a domain you 
 own. Use a short domain name to get better throughput. This argument must be 
 the same on both the client and the server. Queries for domains other
 than 'topdomain' will be forwarded when the \-b option is given, otherwise
 they will be dropped.
 .SH EXAMPLES
-.SS Quickstart:
+See the README file for both a quick test scenario, and a detailed description
-.TP
+of real-world deployment.
 Try it out within your own LAN! Follow these simple steps:
 .TP
 - On your server, run: ./iodined \-f 10.0.0.1 test.asdf
 (If you already use the 10.0.0.0 network, use another internal net like 
 172.16.0.0)
 .TP
 - Enter a password
 .TP
 - On the client, run: ./iodine \-f 192.168.0.1 test.asdf
 (Replace 192.168.0.1 with the server's ip address)
 .TP
 - Enter the same password
 .TP
 - Now the client has the tunnel ip 10.0.0.2 and the server has 10.0.0.1
 .TP
 - Try pinging each other through the tunnel
 .TP
 - Done! :)
 .TP
 To actually use it through a relaying nameserver, see below.
 .SS Full setup:
 .TP
 .B Server side:
 To use this tunnel, you need control over a real domain (like mytunnel.com),
 and a server with a public IP number. If the server already runs a DNS
 server, change the listening port and then use the \-b option to let
 iodined forward the DNS requests. Then, delegate a subdomain 
 (say, tunnel1.mytunnel.com) to the server. If you use BIND for the domain, 
 add these lines to the zone file (replace 10.15.213.99 with your server ip):
 .nf
 tunnel1host	IN	A	10.15.213.99
 tunnel1		IN	NS	tunnel1host.mytunnel.com.
 .fi
 Now any DNS querys for domains ending with tunnel1.mytunnnel.com will be sent
 to your server. Start iodined on the server. The first argument is the tunnel
 IP address (like 192.168.99.1) and the second is the assigned domain (in this
 case tunnel1.mytunnel.com). The \-f argument will keep iodined running in the
 foreground, which helps when testing. iodined will start a virtual interface,
 and also start listening for DNS queries on UDP port 53. Either enter a
 password on the commandline (\-P pass) or after the server has started. Now 
 everything is ready for the client.
 .TP
 .B Client side: 
 All the setup is done, just start iodine. It also takes two
 arguments, the first is the local relaying DNS server and the second is the
 domain used (tunnel1.mytunnnel.com). If DNS queries are allowed to any
 computer, you can use the tunnel endpoint (example: 10.15.213.99 or
 tunnel1host.mytunnel.com) as the first argument. The tunnel interface will get
 an IP close to the servers (in this case 192.168.99.2) and a suitable MTU. 
 Enter the same password as on the server either by argument or after the client
 has started. Now you should be able to ping the other end of the tunnel from 
 either side.  
 .TP
 .B Routing:
 The normal case is to route all traffic through the DNS tunnel. To do this, first
 add a route to the nameserver you use with the default gateway as gateway. Then
 replace the default gateway with the servers IP address within the DNS tunnel,
 and configure the server to do NAT.
 .TP
 .B Troubleshooting:
 Use the \-D option on the server to show received and sent queries, or use a 
 tool like Wireshark/tcpdump. The iodined server replies to NS requests sent for
 subdomains of the tunnel domain. If your domain is tunnel.com, send a NS
 request for foo.tunnel.com to see if the delegation works. dig is a good tool
 for this: 
 .nf
 dig \-t NS foo123.tunnel.com
 .fi
 .TP
 .B MTU issues:
 These issues should be solved now, with automatic fragmentation of downstream 
 packets. There should be no need to set the MTU explicitly on the server.
 .SH SECURITY
 Login is a relatively secure challenge-response MD5 hash, with the
 password never passing the wire.
@ -336,10 +308,9 @@ encrypted in any way. The DNS traffic is also vulnerable to replay,
 injection and man-in-the-middle attacks, especially when iodined is used
 with the \-c option. Use of ssh or vpn tunneling is strongly recommended.
 On both server and client, use
-.I iptables
+.IR iptables ,
 ,
 .I pf
-or other firewlls to block all traffic coming in from the tun interfaces,
+or other firewalls to block all traffic coming in from the tun interfaces,
 except to the used ssh or vpn ports.
 .SH ENVIRONMENT
 .SS IODINE_PASS
@ -348,14 +319,14 @@ If the environment variable
 is set, iodine will use the value it is set to as password instead of asking
 for one. The 
 .B -P
-option still has preference.
+option still has precedence.
 .SS IODINED_PASS
 If the environment variable
 .B IODINED_PASS
 is set, iodined will use the value it is set to as password instead of asking
 for one. The
 .B -P
-option still has preference.
+option still has precedence.
 .El
 .SH SEE ALSO
 The README file in the source distribution contains some more elaborate
--- a/src/Makefile
+++ b/src/Makefile
@ -1,4 +1,4 @@
-COMMONOBJS = tun.o dns.o read.o encoding.o login.o base32.o base64.o md5.o common.o
+COMMONOBJS = tun.o dns.o read.o encoding.o login.o base32.o base64.o base64u.o base128.o md5.o common.o
 CLIENTOBJS = iodine.o client.o util.o
 CLIENT = ../bin/iodine
 SERVEROBJS = iodined.o user.o fw_query.o
@ -30,7 +30,17 @@ $(SERVER): $(COMMONOBJS) $(SERVEROBJS)
 	@echo CC $<
 	@$(CC) $(CFLAGS) $< -o $@
 base64u.o client.o iodined.o: base64u.h
 base64u.c: base64.c
 	@echo Making $@
 	@echo '/* No use in editing, produced by Makefile! */' > $@
 	@sed -e 's/\(base64\)/\1u/ig ; s/0123456789+/0123456789_/' < $< >> $@
 base64u.h: base64.h
 	@echo Making $@
 	@echo '/* No use in editing, produced by Makefile! */' > $@
 	@sed -e 's/\(base64\)/\1u/ig ; s/0123456789+/0123456789_/' < $< >> $@
 clean:
 	@echo "Cleaning src/"
-	@rm -f $(CLIENT){,.exe} $(SERVER){,.exe} *~ *.o *.core
+	@rm -f $(CLIENT){,.exe} $(SERVER){,.exe} *~ *.o *.core base64u.*
--- a/src/base128.c
+++ b/src/base128.c
@ -0,0 +1,291 @@
 /*
 * Copyright (C) 2009 J.A.Bezemer@opensourcepartners.nl
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
 /*
 * raw	76543210 76543210 76543210 76543210 76543210 76543210 76543210
 * enc	65432106 54321065 43210654 32106543 21065432 10654321 06543210
 *	^      ^       ^       ^       ^       ^       ^       ^
 *
 *	0001 1  0001 1
 *	0011 3  0011 3
 *	0111 7  0111 7
 *	1111 f  0110 6
 *	1110 e  0100 4
 *	1100 c
 *	1000 8
 */
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include "encoding.h"
 #include "base128.h"
 #define BLKSIZE_RAW 7
 #define BLKSIZE_ENC 8
 /* Don't use '-' (restricted to middle of labels), prefer iso_8859-1
 * accent chars since they might readily be entered in normal use,
 * don't use 254-255 because of possible function overloading in DNS systems.
 */
 static const unsigned char cb128[] = 
 	"abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"
 	"\274\275\276\277"
 	"\300\301\302\303\304\305\306\307\310\311\312\313\314\315\316\317"
 	"\320\321\322\323\324\325\326\327\330\331\332\333\334\335\336\337"
 	"\340\341\342\343\344\345\346\347\350\351\352\353\354\355\356\357"
 	"\360\361\362\363\364\365\366\367\370\371\372\373\374\375";
 static unsigned char rev128[256];
 static int reverse_init = 0;
 static int base128_encode(char *, size_t *, const void *, size_t);
 static int base128_decode(void *, size_t *, const char *, size_t);
 static int base128_handles_dots();
 static int base128_blksize_raw();
 static int base128_blksize_enc();
 static struct encoder base128_encoder =
 {
 	"Base128",
 	base128_encode,
 	base128_decode,
 	base128_handles_dots,
 	base128_handles_dots,
 	base128_blksize_raw,
 	base128_blksize_enc
 };
 struct encoder
 *get_base128_encoder()
 {
 	return &base128_encoder;
 }
 static int 
 base128_handles_dots()
 {
 	return 0;
 }
 static int 
 base128_blksize_raw()
 {
 	return BLKSIZE_RAW;
 }
 static int 
 base128_blksize_enc()
 {
 	return BLKSIZE_ENC;
 }
 inline static void
 base128_reverse_init()
 {
 	int i;
 	unsigned char c;
 	if (!reverse_init) {
 		memset (rev128, 0, 256);
 		for (i = 0; i < 128; i++) {
 			c = cb128[i];
 			rev128[(int) c] = i;
 		}
 		reverse_init = 1;
 	}
 }
 static int 
 base128_encode(char *buf, size_t *buflen, const void *data, size_t size)
 /*
 * Fills *buf with max. *buflen characters, encoding size bytes of *data.
 *
 * NOTE: *buf space should be at least 1 byte _more_ than *buflen
 * to hold the trailing '\0'.
 *
 * return value    : #bytes filled in buf   (excluding \0)
 * sets *buflen to : #bytes encoded from data
 */
 {
 	unsigned char *ubuf = (unsigned char *) buf;
 	unsigned char *udata = (unsigned char *) data;
 	int iout = 0;	/* to-be-filled output char */
 	int iin = 0;	/* one more than last input byte that can be
 			   successfully decoded */
 	/* Note: Don't bother to optimize manually. GCC optimizes
 	   better(!) when using simplistic array indexing. */
 	while (1) {
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[((udata[iin] & 0xfe) >> 1)];
 		iout++;
 		if (iout >= *buflen || iin >= size) {
 			iout--; 	/* previous char is useless */
 			break;
 		}
 		ubuf[iout] = cb128[((udata[iin] & 0x01) << 6) |
 				   ((iin + 1 < size) ?
 				    ((udata[iin + 1] & 0xfc) >> 2) : 0)];
 		iin++;			/* 0 complete, iin=1 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[((udata[iin] & 0x03) << 5) |
 				   ((iin + 1 < size) ?
 				    ((udata[iin + 1] & 0xf8) >> 3) : 0)];
 		iin++;			/* 1 complete, iin=2 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[((udata[iin] & 0x07) << 4) |
 				   ((iin + 1 < size) ?
 				    ((udata[iin + 1] & 0xf0) >> 4) : 0)];
 		iin++;			/* 2 complete, iin=3 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[((udata[iin] & 0x0f) << 3) |
 				   ((iin + 1 < size) ?
 				    ((udata[iin + 1] & 0xe0) >> 5) : 0)];
 		iin++;			/* 3 complete, iin=4 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[((udata[iin] & 0x1f) << 2) |
 				   ((iin + 1 < size) ?
 				    ((udata[iin + 1] & 0xc0) >> 6) : 0)];
 		iin++;			/* 4 complete, iin=5 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[((udata[iin] & 0x3f) << 1) |
 				   ((iin + 1 < size) ?
 				    ((udata[iin + 1] & 0x80) >> 7) : 0)];
 		iin++;			/* 5 complete, iin=6 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		ubuf[iout] = cb128[(udata[iin] & 0x7f)];
 		iin++;			/* 6 complete, iin=7 */
 		iout++;
 	}
 	ubuf[iout] = '\0';
 	/* store number of bytes from data that was used */
 	*buflen = iin;
 	return iout;
 }
 #define REV128(x) rev128[(int) (x)]
 static int
 base128_decode(void *buf, size_t *buflen, const char *str, size_t slen)
 /*
 * Fills *buf with max. *buflen bytes, decoded from slen chars in *str.
 * Decoding stops early when *str contains \0.
 * Illegal encoded chars are assumed to decode to zero.
 *
 * NOTE: *buf space should be at least 1 byte _more_ than *buflen
 * to hold a trailing '\0' that is added (though *buf will usually
 * contain full-binary data).
 *
 * return value    : #bytes filled in buf   (excluding \0)
 */
 {
 	unsigned char *ustr = (unsigned char *) str;
 	unsigned char *ubuf = (unsigned char *) buf;
 	int iout = 0;	/* to-be-filled output byte */
 	int iin = 0;	/* next input char to use in decoding */
 	base128_reverse_init ();
 	/* Note: Don't bother to optimize manually. GCC optimizes
 	   better(!) when using simplistic array indexing. */
 	while (1) {
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x7f) << 1) | 
 			     ((REV128(ustr[iin + 1]) & 0x40) >> 6);
 		iin++;  		/* 0 used up, iin=1 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x3f) << 2) |
 			     ((REV128(ustr[iin + 1]) & 0x60) >> 5);
 		iin++;  		/* 1 used up, iin=2 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x1f) << 3) |
 			     ((REV128(ustr[iin + 1]) & 0x70) >> 4);
 		iin++;  		/* 2 used up, iin=3 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x0f) << 4) |
 			     ((REV128(ustr[iin + 1]) & 0x78) >> 3);
 		iin++;  		/* 3 used up, iin=4 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x07) << 5) |
 			     ((REV128(ustr[iin + 1]) & 0x7c) >> 2);
 		iin++;  		/* 4 used up, iin=5 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x03) << 6) |
 			     ((REV128(ustr[iin + 1]) & 0x7e) >> 1);
 		iin++;  		/* 5 used up, iin=6 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV128(ustr[iin]) & 0x01) << 7) |
 			     ((REV128(ustr[iin + 1]) & 0x7f));
 		iin += 2;  		/* 6,7 used up, iin=8 */
 		iout++;
 	}
 	ubuf[iout] = '\0';
 	return iout;
 }
--- a/src/base128.h
+++ b/src/base128.h
@ -0,0 +1,22 @@
 /*
 * Copyright (C) 2009 J.A.Bezemer@opensourcepartners.nl
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
 #ifndef __BASE128_H__
 #define __BASE128_H__
 struct encoder *get_base128_encoder(void);
 #endif
--- a/src/base32.c
+++ b/src/base32.c
@ -1,5 +1,6 @@
 /*
 * Copyright (c) 2006-2009 Bjorn Andersson <flex@kryo.se>, Erik Ekman <yarrick@kryo.se>
 * Mostly rewritten 2009 J.A.Bezemer@opensourcepartners.nl
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -28,10 +29,11 @@ static const char cb32[] =
 	"abcdefghijklmnopqrstuvwxyz012345";
 static const char cb32_ucase[] = 
 	"ABCDEFGHIJKLMNOPQRSTUVWXYZ012345";
-static unsigned char rev32[128];
+static unsigned char rev32[256];
 static int reverse_init = 0;
 static int base32_decode(void *, size_t *, const char *, size_t);
 static int base32_encode(char *, size_t *, const void *, size_t);
 static int base32_decode(void *, size_t *, const char *, size_t);
 static int base32_handles_dots();
 static int base32_blksize_raw();
 static int base32_blksize_enc();
@ -71,14 +73,14 @@ base32_blksize_enc()
 	return BLKSIZE_ENC;
 }
-static void
+inline static void
 base32_reverse_init()
 {
 	int i;
 	unsigned char c;
 	static int reverse_init = 0;
 	if (!reverse_init) {
 		memset (rev32, 0, 256);
 		for (i = 0; i < 32; i++) {
 			c = cb32[i];
 			rev32[(int) c] = i;
@ -104,123 +106,165 @@ b32_8to5(int in)
 static int 
 base32_encode(char *buf, size_t *buflen, const void *data, size_t size)
 /*
 * Fills *buf with max. *buflen characters, encoding size bytes of *data.
 *
 * NOTE: *buf space should be at least 1 byte _more_ than *buflen
 * to hold the trailing '\0'.
 *
 * return value    : #bytes filled in buf   (excluding \0)
 * sets *buflen to : #bytes encoded from data
 */
 {
-	size_t newsize;
+	unsigned char *udata = (unsigned char *) data;
-	size_t maxsize;
+	int iout = 0;	/* to-be-filled output char */
-	unsigned char *p;
+	int iin = 0;	/* one more than last input byte that can be
-	unsigned char *q;
+			   successfully decoded */
 	int i;
-	memset(buf, 0, *buflen);
+	/* Note: Don't bother to optimize manually. GCC optimizes
 	   better(!) when using simplistic array indexing. */
-	/* how many chars can we encode within the buf */
+	while (1) {
-	maxsize = BLKSIZE_RAW * (*buflen / BLKSIZE_ENC);
+		if (iout >= *buflen || iin >= size)
-	/* how big will the encoded data be */
+			break;
-	newsize = BLKSIZE_ENC * (size / BLKSIZE_RAW);
+		buf[iout] = cb32[((udata[iin] & 0xf8) >> 3)];
-	if (size % BLKSIZE_RAW) {
+		iout++;
-		newsize += BLKSIZE_ENC;
+
-	}
+		if (iout >= *buflen || iin >= size) {
-	/* if the buffer is too small, eat some of the data */
+			iout--; 	/* previous char is useless */
-	if (*buflen < newsize) {
+			break;
-		size = maxsize;
+		}
 		buf[iout] = cb32[((udata[iin] & 0x07) << 2) |
 				  ((iin + 1 < size) ?
 				   ((udata[iin + 1] & 0xc0) >> 6) : 0)];
 		iin++;			/* 0 complete, iin=1 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb32[((udata[iin] & 0x3e) >> 1)];
 		iout++;
 		if (iout >= *buflen || iin >= size) {
 			iout--;		/* previous char is useless */
 			break;
 		}
 		buf[iout] = cb32[((udata[iin] & 0x01) << 4) |
 				  ((iin + 1 < size) ?
 				   ((udata[iin + 1] & 0xf0) >> 4) : 0)];
 		iin++;			/* 1 complete, iin=2 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb32[((udata[iin] & 0x0f) << 1) |
 				  ((iin + 1 < size) ?
 				   ((udata[iin + 1] & 0x80) >> 7) : 0)];
 		iin++;			/* 2 complete, iin=3 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb32[((udata[iin] & 0x7c) >> 2)];
 		iout++;
 		if (iout >= *buflen || iin >= size) {
 			iout--;		/* previous char is useless */
 			break;
 		}
 		buf[iout] = cb32[((udata[iin] & 0x03) << 3) |
 				  ((iin + 1 < size) ?
 				   ((udata[iin + 1] & 0xe0) >> 5) : 0)];
 		iin++;			/* 3 complete, iin=4 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb32[((udata[iin] & 0x1f))];
 		iin++;			/* 4 complete, iin=5 */
 		iout++;
 	}
-	p = (unsigned char *) buf;
+	buf[iout] = '\0';
 	q = (unsigned char *)data;
 	for(i=0;i<size;i+=BLKSIZE_RAW) {
 		p[0] = cb32[((q[0] & 0xf8) >> 3)];
 		p[1] = cb32[(((q[0] & 0x07) << 2) | ((q[1] & 0xc0) >> 6))];
 		p[2] = (i+1 < size) ? cb32[((q[1] & 0x3e) >> 1)] : '\0';
 		p[3] = (i+1 < size) ? cb32[((q[1] & 0x01) << 4) | ((q[2] & 0xf0) >> 4)] : '\0';
 		p[4] = (i+2 < size) ? cb32[((q[2] & 0x0f) << 1) | ((q[3] & 0x80) >> 7)] : '\0';
 		p[5] = (i+3 < size) ? cb32[((q[3] & 0x7c) >> 2)] : '\0';
 		p[6] = (i+3 < size) ? cb32[((q[3] & 0x03) << 3) | ((q[4] & 0xe0) >> 5)] : '\0';
 		p[7] = (i+4 < size) ? cb32[((q[4] & 0x1f))] : '\0';
 		q += BLKSIZE_RAW;
 		p += BLKSIZE_ENC;
 	}	
 	*p = 0;
 	/* store number of bytes from data that was used */
-	*buflen = size;
+	*buflen = iin;
-	return strlen(buf);
+	return iout;
 }
 #define DECODE_ERROR 0xffffffff
 #define REV32(x) rev32[(int) (x)]
 static int
 decode_token(const unsigned char *t, unsigned char *data, size_t len) 
 {
 	if (len < 2)
 		return 0;
 	data[0] = ((REV32(t[0]) & 0x1f) << 3) | 
 			  ((REV32(t[1]) & 0x1c) >> 2);
 	if (len < 4)
 		return 1;
 	data[1] = ((REV32(t[1]) & 0x03) << 6) | 
 			  ((REV32(t[2]) & 0x1f) << 1) | 
 			  ((REV32(t[3]) & 0x10) >> 4);
 	if (len < 5)
 		return 2;
 	data[2] = ((REV32(t[3]) & 0x0f) << 4) |
 			  ((REV32(t[4]) & 0x1e) >> 1);
 	if (len < 7)
 		return 3;
 	data[3] = ((REV32(t[4]) & 0x01) << 7) |
 			  ((REV32(t[5]) & 0x1f) << 2) |
 			  ((REV32(t[6]) & 0x18) >> 3);
 	if (len < 8)
 		return 4;
 	data[4] = ((REV32(t[6]) & 0x07) << 5) |
 			  ((REV32(t[7]) & 0x1f));
 	return 5;
 }
 static int
 base32_decode(void *buf, size_t *buflen, const char *str, size_t slen)
 /*
 * Fills *buf with max. *buflen bytes, decoded from slen chars in *str.
 * Decoding stops early when *str contains \0.
 * Illegal encoded chars are assumed to decode to zero.
 *
 * NOTE: *buf space should be at least 1 byte _more_ than *buflen
 * to hold a trailing '\0' that is added (though *buf will usually
 * contain full-binary data).
 *
 * return value    : #bytes filled in buf   (excluding \0)
 */
 {
-	unsigned char *q;
+	unsigned char *ubuf = (unsigned char *) buf;
-	size_t newsize;
+	int iout = 0;	/* to-be-filled output byte */
-	size_t maxsize;
+	int iin = 0;	/* next input char to use in decoding */
 	const char *p;
 	int len;
-	base32_reverse_init();
+	base32_reverse_init ();
 	/* chars needed to decode slen */
 	newsize = BLKSIZE_RAW * (slen / BLKSIZE_ENC + 1) + 1;
 	/* encoded chars that fit in buf */
 	maxsize = BLKSIZE_ENC * (*buflen / BLKSIZE_RAW + 1) + 1;
 	/* if the buffer is too small, eat some of the data */
 	if (*buflen < newsize) {
 		slen = maxsize;
 	}
-	q = buf;
+	/* Note: Don't bother to optimize manually. GCC optimizes
-	for (p = str; *p && strchr(cb32, *p); p += BLKSIZE_ENC) {
+	   better(!) when using simplistic array indexing. */
-		len = decode_token((unsigned char *) p, (unsigned char *) q, slen);	
+
-		q += len;
+	while (1) {
-		slen -= BLKSIZE_ENC;
+		if (iout >= *buflen || iin + 1 >= slen ||
-		
+		    str[iin] == '\0' || str[iin + 1] == '\0')
 		if (len < BLKSIZE_RAW)
 			break;
-	}
+		ubuf[iout] = ((REV32(str[iin]) & 0x1f) << 3) | 
-	*q = '\0';
+			     ((REV32(str[iin + 1]) & 0x1c) >> 2);
-	
+		iin++;  		/* 0 used up, iin=1 */
-	return q - (unsigned char *) buf;
+		iout++;
 }
 		if (iout >= *buflen || iin + 2 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0' ||
 		    str[iin + 2] == '\0')
 			break;
 		ubuf[iout] = ((REV32(str[iin]) & 0x03) << 6) | 
 			     ((REV32(str[iin + 1]) & 0x1f) << 1) | 
 			     ((REV32(str[iin + 2]) & 0x10) >> 4);
 		iin += 2;  		/* 1,2 used up, iin=3 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV32(str[iin]) & 0x0f) << 4) |
 			     ((REV32(str[iin + 1]) & 0x1e) >> 1);
 		iin++;  		/* 3 used up, iin=4 */
 		iout++;
 		if (iout >= *buflen || iin + 2 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0' ||
 		    str[iin + 2] == '\0')
 			break;
 		ubuf[iout] = ((REV32(str[iin]) & 0x01) << 7) |
 			     ((REV32(str[iin + 1]) & 0x1f) << 2) |
 			     ((REV32(str[iin + 2]) & 0x18) >> 3);
 		iin += 2;  		/* 4,5 used up, iin=6 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV32(str[iin]) & 0x07) << 5) |
 			     ((REV32(str[iin + 1]) & 0x1f));
 		iin += 2;  		/* 6,7 used up, iin=8 */
 		iout++;
 	}
 	ubuf[iout] = '\0';
 	return iout;
 }
--- a/src/base64.c
+++ b/src/base64.c
@ -1,5 +1,6 @@
 /*
 * Copyright (c) 2006-2009 Bjorn Andersson <flex@kryo.se>, Erik Ekman <yarrick@kryo.se>
 * Mostly rewritten 2009 J.A.Bezemer@opensourcepartners.nl
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -19,15 +20,16 @@
 #include <string.h>
 #include "encoding.h"
 #include "common.h"
 #include "base64.h"
 #define BLKSIZE_RAW 3
 #define BLKSIZE_ENC 4
 /* Note: the "unofficial" char is last here, which means that the \377 pattern
   in DOWNCODECCHECK1 ('Y' request) will properly test it. */
 static const char cb64[] = 
 	"abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ-0123456789+";
-static unsigned char rev64[128];
+static unsigned char rev64[256];
 static int reverse_init = 0;
 static int base64_encode(char *, size_t *, const void *, size_t);
@ -36,8 +38,6 @@ static int base64_handles_dots();
 static int base64_blksize_raw();
 static int base64_blksize_enc();
 #define REV64(x) rev64[(int) (x)]
 static struct encoder base64_encoder =
 {
 	"Base64",
@ -73,122 +73,133 @@ base64_blksize_enc()
 	return BLKSIZE_ENC;
 }
-static int 
+inline static void
-base64_encode(char *buf, size_t *buflen, const void *data, size_t size)
+base64_reverse_init()
 {
 	size_t newsize;
 	size_t maxsize;
 	unsigned char *s;
 	unsigned char *p;
 	unsigned char *q;
 	int i;
 	memset(buf, 0, *buflen);
 	/* how many chars can we encode within the buf */
 	maxsize = BLKSIZE_RAW * (*buflen / BLKSIZE_ENC);
 	/* how big will the encoded data be */
 	newsize = BLKSIZE_ENC * (size / BLKSIZE_RAW);
 	if (size % BLKSIZE_RAW) {
 		newsize += BLKSIZE_ENC;
 	}
 	/* if the buffer is too small, eat some of the data */
 	if (*buflen < newsize) {
 		size = maxsize;
 	}
 	p = s = (unsigned char *) buf;
 	q = (unsigned char *)data;
 	for(i=0;i<size;i+=BLKSIZE_RAW) {
 		p[0] = cb64[((q[0] & 0xfc) >> 2)];
 		p[1] = cb64[(((q[0] & 0x03) << 4) | ((q[1] & 0xf0) >> 4))];
 		p[2] = (i+1 < size) ? cb64[((q[1] & 0x0f) << 2 ) | ((q[2] & 0xc0) >> 6)] : '\0';
 		p[3] = (i+2 < size) ? cb64[(q[2] & 0x3f)] : '\0';
 		q += BLKSIZE_RAW;
 		p += BLKSIZE_ENC;
 	}	
 	*p = 0;
 	/* store number of bytes from data that was used */
 	*buflen = size;
 	return strlen(buf);
 }
 #define DECODE_ERROR 0xffffffff
 static int
 decode_token(const unsigned char *t, unsigned char *data, size_t len) 
 {
 	if (len < 2)
 		return 0;
 	data[0] = ((REV64(t[0]) & 0x3f) << 2) | 
 			  ((REV64(t[1]) & 0x30) >> 4);
 	if (len < 3)
 		return 1;
 	data[1] = ((REV64(t[1]) & 0x0f) << 4) | 
 			  ((REV64(t[2]) & 0x3c) >> 2);
 	if (len < 4)
 		return 2;
 	data[2] = ((REV64(t[2]) & 0x03) << 6) |
 			  (REV64(t[3]) & 0x3f);
 	return 3;
 }
 static int
 base64_decode(void *buf, size_t *buflen, const char *str, size_t slen)
 {
 	unsigned char *q;
 	size_t newsize;
 	size_t maxsize;
 	const char *p;
 	unsigned char c;
 	unsigned char block[BLKSIZE_ENC];
 	int len;
 	int i;
 	if (!reverse_init) {
 		memset (rev64, 0, 256);
 		for (i = 0; i < 64; i++) {
 			c = cb64[i];
 			rev64[(int) c] = i;
 		}
 		reverse_init = 1;
 	}
 	/* chars needed to decode slen */
 	newsize = BLKSIZE_RAW * (slen / BLKSIZE_ENC + 1) + 1;
 	/* encoded chars that fit in buf */
 	maxsize = BLKSIZE_ENC * (*buflen / BLKSIZE_RAW + 1) + 1;
 	/* if the buffer is too small, eat some of the data */
 	if (*buflen < newsize) {
 		slen = maxsize;
 	}
 	q = buf;
 	for (p = str; *p; p += BLKSIZE_ENC) {
 		/* since the str is const, we unescape in another buf */
 		for (i = 0; i < BLKSIZE_ENC; i++) {
 			block[i] = p[i];
 		}
 		len = decode_token(block, (unsigned char *) q, slen);	
 		q += len;
 		slen -= BLKSIZE_ENC;
 		if (len < BLKSIZE_RAW)
 			break;
 	}
 	*q = '\0';
 	return q - (unsigned char *) buf;
 }
 static int 
 base64_encode(char *buf, size_t *buflen, const void *data, size_t size)
 /*
 * Fills *buf with max. *buflen characters, encoding size bytes of *data.
 *
 * NOTE: *buf space should be at least 1 byte _more_ than *buflen
 * to hold the trailing '\0'.
 *
 * return value    : #bytes filled in buf   (excluding \0)
 * sets *buflen to : #bytes encoded from data
 */
 {
 	unsigned char *udata = (unsigned char *) data;
 	int iout = 0;	/* to-be-filled output char */
 	int iin = 0;	/* one more than last input byte that can be
 			   successfully decoded */
 	/* Note: Don't bother to optimize manually. GCC optimizes
 	   better(!) when using simplistic array indexing. */
 	while (1) {
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb64[((udata[iin] & 0xfc) >> 2)];
 		iout++;
 		if (iout >= *buflen || iin >= size) {
 			iout--;		/* previous char is useless */
 			break;
 		}
 		buf[iout] = cb64[((udata[iin] & 0x03) << 4) |
 				  ((iin + 1 < size) ?
 				   ((udata[iin + 1] & 0xf0) >> 4) : 0)];
 		iin++;			/* 0 complete, iin=1 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb64[((udata[iin] & 0x0f) << 2 ) |
 				  ((iin + 1 < size) ?
 				   ((udata[iin + 1] & 0xc0) >> 6) : 0)];
 		iin++;			/* 1 complete, iin=2 */
 		iout++;
 		if (iout >= *buflen || iin >= size)
 			break;
 		buf[iout] = cb64[(udata[iin] & 0x3f)];
 		iin++;			/* 2 complete, iin=3 */
 		iout++;
 	}
 	buf[iout] = '\0';
 	/* store number of bytes from data that was used */
 	*buflen = iin;
 	return iout;
 }
 #define REV64(x) rev64[(int) (x)]
 static int
 base64_decode(void *buf, size_t *buflen, const char *str, size_t slen)
 /*
 * Fills *buf with max. *buflen bytes, decoded from slen chars in *str.
 * Decoding stops early when *str contains \0.
 * Illegal encoded chars are assumed to decode to zero.
 *
 * NOTE: *buf space should be at least 1 byte _more_ than *buflen
 * to hold a trailing '\0' that is added (though *buf will usually
 * contain full-binary data).
 *
 * return value    : #bytes filled in buf   (excluding \0)
 */
 {
 	unsigned char *ubuf = (unsigned char *) buf;
 	int iout = 0;	/* to-be-filled output byte */
 	int iin = 0;	/* next input char to use in decoding */
 	base64_reverse_init ();
 	/* Note: Don't bother to optimize manually. GCC optimizes
 	   better(!) when using simplistic array indexing. */
 	while (1) {
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV64(str[iin]) & 0x3f) << 2) | 
 			     ((REV64(str[iin + 1]) & 0x30) >> 4);
 		iin++;  		/* 0 used up, iin=1 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV64(str[iin]) & 0x0f) << 4) | 
 			     ((REV64(str[iin + 1]) & 0x3c) >> 2);
 		iin++;  		/* 1 used up, iin=2 */
 		iout++;
 		if (iout >= *buflen || iin + 1 >= slen ||
 		    str[iin] == '\0' || str[iin + 1] == '\0')
 			break;
 		ubuf[iout] = ((REV64(str[iin]) & 0x03) << 6) |
 			     (REV64(str[iin + 1]) & 0x3f);
 		iin += 2;  		/* 2,3 used up, iin=4 */
 		iout++;
 	}
 	ubuf[iout] = '\0';
 	return iout;
 }
--- a/src/client.c
+++ b/src/client.c
--- a/src/client.h
+++ b/src/client.h
@ -27,9 +27,11 @@ void client_set_nameserver(const char *cp, int port);
 void client_set_topdomain(const char *cp);
 void client_set_password(const char *cp);
 void set_qtype(char *qtype);
 char *get_qtype();
 void set_downenc(char *encoding);
 void client_set_selecttimeout(int select_timeout);
 void client_set_lazymode(int lazy_mode);
 void client_set_hostname_maxlen(int i);
 int client_handshake(int dns_fd, int raw_mode, int autodetect_frag_size, int fragsize);
 int client_tunnel(int tun_fd, int dns_fd);
--- a/src/common.h
+++ b/src/common.h
@ -74,6 +74,9 @@ extern const unsigned char raw_header[RAW_HDR_LEN];
 # define DONT_FRAG_VALUE 1
 #endif
 #define T_UNSET 65432
 /* Unused RR type; "private use" range, see http://www.bind9.net/dns-parameters */
 struct packet 
 {
 	int len;		/* Total packet length */
@ -89,10 +92,12 @@ struct query {
 	unsigned short type;
 	unsigned short rcode;
 	unsigned short id;
 	unsigned short iddupe;		/* only used for dupe checking */
 	struct in_addr destination;
 	struct sockaddr from;
 	int fromlen;
 	unsigned short id2;
 	struct sockaddr from2;
 	int fromlen2;
 };
 enum connection {
--- a/src/dns.c
+++ b/src/dns.c
@ -39,6 +39,8 @@
 #include "encoding.h"
 #include "read.h"
 int dnsc_use_edns0 = 1;
 #define CHECKLEN(x) if (buflen - (p-buf) < (x))  return 0
 int
@ -48,6 +50,7 @@ dns_encode(char *buf, size_t buflen, struct query *q, qr_t qr, char *data, size_
 	short name;
 	char *p;
 	int len;
 	int ancnt;
 	if (buflen < sizeof(HEADER))
 		return 0;
@ -68,7 +71,6 @@ dns_encode(char *buf, size_t buflen, struct query *q, qr_t qr, char *data, size_
 	switch (qr) {
 	case QR_ANSWER:
 		header->ancount = htons(1);
 		header->qdcount = htons(1);
 		name = 0xc000 | ((p - buf) & 0x3fff);
@ -81,56 +83,115 @@ dns_encode(char *buf, size_t buflen, struct query *q, qr_t qr, char *data, size_
 		putshort(&p, C_IN);
 		/* Answer section */
 		CHECKLEN(10);
 		putshort(&p, name);	
 		if (q->type == T_A)
 			putshort(&p, T_CNAME);	/* answer CNAME to A question */
 		else
 			putshort(&p, q->type);
 		putshort(&p, C_IN);
 		putlong(&p, 0);		/* TTL */
-		if (q->type == T_CNAME || q->type == T_A || q->type == T_MX) {
+		if (q->type == T_CNAME || q->type == T_A) {
 			/* data is expected to be like "Hblabla.host.name.com\0" */
-			char *startp = p;
+			char *startp;
 			int namelen;
 			CHECKLEN(10);
 			putshort(&p, name);	
 			if (q->type == T_A)
 				/* answer CNAME to A question */
 				putshort(&p, T_CNAME);
 			else
 				putshort(&p, q->type);
 			putshort(&p, C_IN);
 			putlong(&p, 0);		/* TTL */
 			startp = p;
 			p += 2;			/* skip 2 bytes length */
 			CHECKLEN(2);
 			if (q->type == T_MX)
 				putshort(&p, 10);	/* preference */
 			putname(&p, buflen - (p - buf), data);
 			CHECKLEN(0);
 			namelen = p - startp;
 			namelen -= 2;
 			putshort(&startp, namelen);
 			ancnt = 1;
 		} else if (q->type == T_MX || q->type == T_SRV) {
 			/* Data is expected to be like
 			   "Hblabla.host.name.com\0Hanother.com\0\0"
 			   For SRV, see RFC2782.
 			 */
 			char *mxdata = data;
 			char *startp;
 			int namelen;
 			ancnt = 1;
 			while (1) {
 				CHECKLEN(10);
 				putshort(&p, name);	
 				putshort(&p, q->type);
 				putshort(&p, C_IN);
 				putlong(&p, 0);		/* TTL */
 				startp = p;
 				p += 2;			/* skip 2 bytes length */
 				CHECKLEN(2);
 				putshort(&p, 10 * ancnt);	/* preference */
 				if (q->type == T_SRV) {
 					/* weight, port (5060 = SIP) */
 					CHECKLEN(4);
 					putshort(&p, 10);
 					putshort(&p, 5060);
 				}
 				putname(&p, buflen - (p - buf), mxdata);
 				CHECKLEN(0);
 				namelen = p - startp;
 				namelen -= 2;
 				putshort(&startp, namelen);
 				mxdata = mxdata + strlen(mxdata) + 1;
 				if (*mxdata == '\0')
 					break;
 				ancnt++;
 			}
 		} else if (q->type == T_TXT) {
 			/* TXT has binary or base-X data */
-			char *startp = p;
+			char *startp;
 			int txtlen;
 			CHECKLEN(10);
 			putshort(&p, name);	
 			putshort(&p, q->type);
 			putshort(&p, C_IN);
 			putlong(&p, 0);		/* TTL */
 			startp = p;
 			p += 2;			/* skip 2 bytes length */
 			puttxtbin(&p, buflen - (p - buf), data, datalen);
 			CHECKLEN(0);
 			txtlen = p - startp;
 			txtlen -= 2;
 			putshort(&startp, txtlen);
 			ancnt = 1;
 		} else {
 			/* NULL has raw binary data */
 			CHECKLEN(10);
 			putshort(&p, name);	
 			putshort(&p, q->type);
 			putshort(&p, C_IN);
 			putlong(&p, 0);		/* TTL */
 			datalen = MIN(datalen, buflen - (p - buf));
 			CHECKLEN(2);
 			putshort(&p, datalen);
 			CHECKLEN(datalen);
 			putdata(&p, data, datalen);
 			CHECKLEN(0);
 			ancnt = 1;
 		}
 		header->ancount = htons(ancnt);
 		break;
 	case QR_QUERY:
 		/* Note that iodined also uses this for forward queries */
 		header->qdcount = htons(1);
 		header->arcount = htons(1);
 		datalen = MIN(datalen, buflen - (p - buf));
 		putname(&p, datalen, data);
@ -141,6 +202,9 @@ dns_encode(char *buf, size_t buflen, struct query *q, qr_t qr, char *data, size_
 		/* EDNS0 to advertise maximum response length
 		   (even CNAME/A/MX, 255+255+header would be >512) */
 		if (dnsc_use_edns0) {
 			header->arcount = htons(1);
 			/*XXX START adjust indent 1 tab forward*/
 		CHECKLEN(11);
 		putbyte(&p, 0x00);    /* Root */
 		putshort(&p, 0x0029); /* OPT */
@ -148,6 +212,9 @@ dns_encode(char *buf, size_t buflen, struct query *q, qr_t qr, char *data, size_
 		putshort(&p, 0x0000); /* Higher bits/edns version */
 		putshort(&p, 0x8000); /* Z */
 		putshort(&p, 0x0000); /* Data length */
 			/*XXX END adjust indent 1 tab forward*/
 		}
 		break;
 	}
@ -159,13 +226,14 @@ dns_encode(char *buf, size_t buflen, struct query *q, qr_t qr, char *data, size_
 int
 dns_encode_ns_response(char *buf, size_t buflen, struct query *q, char *topdomain)
 /* Only used when iodined gets an NS type query */
 /* Mostly same as dns_encode_a_response() below */
 {
 	HEADER *header;
 	int len;
 	short name;
 	short topname;
 	short nsname;
-	char *domain;
+	char *ipp;
 	int domain_len;
 	char *p;
@ -193,13 +261,16 @@ dns_encode_ns_response(char *buf, size_t buflen, struct query *q, char *topdomai
 	/* pointer to start of name */
 	name = 0xc000 | ((p - buf) & 0x3fff);
-	domain = strstr(q->name, topdomain);
+	domain_len = strlen(q->name) - strlen(topdomain);
-	if (domain) {
+	if (domain_len < 0 || domain_len == 1)
 		domain_len = (int) (domain - q->name); 
 	} else {
 		return -1;
-	}
+	if (strcasecmp(q->name + domain_len, topdomain))
-	/* pointer to start of topdomain */
+		return -1;
 	if (domain_len >= 1 && q->name[domain_len - 1] != '.')
 		return -1;
 	/* pointer to start of topdomain; instead of dots at the end
 	   we have length-bytes in front, so total length is the same */
 	topname = 0xc000 | ((p - buf + domain_len) & 0x3fff);
 	/* Query section */
@ -233,12 +304,72 @@ dns_encode_ns_response(char *buf, size_t buflen, struct query *q, char *topdomai
 	putshort(&p, 4);			/* Data length */
 	/* ugly hack to output IP address */
-	domain = (char *) &q->destination;
+	ipp = (char *) &q->destination;
 	CHECKLEN(4);
-	putbyte(&p, *domain++);
+	putbyte(&p, *(ipp++));
-	putbyte(&p, *domain++);
+	putbyte(&p, *(ipp++));
-	putbyte(&p, *domain++);
+	putbyte(&p, *(ipp++));
-	putbyte(&p, *domain);
+	putbyte(&p, *ipp);
 	len = p - buf;
 	return len;
 }
 int
 dns_encode_a_response(char *buf, size_t buflen, struct query *q)
 /* Only used when iodined gets an A type query for ns.topdomain or www.topdomain */
 /* Mostly same as dns_encode_ns_response() above */
 {
 	HEADER *header;
 	int len;
 	short name;
 	char *ipp;
 	char *p;
 	if (buflen < sizeof(HEADER))
 		return 0;
 	memset(buf, 0, buflen);
 	header = (HEADER*)buf;
 	header->id = htons(q->id);
 	header->qr = 1;
 	header->opcode = 0;
 	header->aa = 1;
 	header->tc = 0;
 	header->rd = 0;
 	header->ra = 0;
 	p = buf + sizeof(HEADER);
 	header->qdcount = htons(1);
 	header->ancount = htons(1);
 	/* pointer to start of name */
 	name = 0xc000 | ((p - buf) & 0x3fff);
 	/* Query section */
 	putname(&p, buflen - (p - buf), q->name);	/* Name */
 	CHECKLEN(4);
 	putshort(&p, q->type);			/* Type */
 	putshort(&p, C_IN);			/* Class */
 	/* Answer section */
 	CHECKLEN(12);
 	putshort(&p, name);			/* Name */
 	putshort(&p, q->type);			/* Type */
 	putshort(&p, C_IN);			/* Class */
 	putlong(&p, 3600);			/* TTL */
 	putshort(&p, 4);			/* Data length */
 	/* ugly hack to output IP address */
 	ipp = (char *) &q->destination;
 	CHECKLEN(4);
 	putbyte(&p, *(ipp++));
 	putbyte(&p, *(ipp++));
 	putbyte(&p, *(ipp++));
 	putbyte(&p, *ipp);
 	len = p - buf;
 	return len;
@ -276,6 +407,7 @@ dns_decode(char *buf, size_t buflen, struct query *q, qr_t qr, char *packet, siz
 	int id; 
 	int rv;
 	q->id2 = 0;
 	rv = 0;
 	header = (HEADER*)packet;
@ -324,19 +456,22 @@ dns_decode(char *buf, size_t buflen, struct query *q, qr_t qr, char *packet, siz
 		} 
 		if (ancount < 1) {
-			/* We may get both CNAME and A, then ancount=2 */
+			/* DNS errors like NXDOMAIN have ancount=0 and
 			   stop here. CNAME may also have A; MX/SRV may have
 			   multiple results. */
 			return -1;
 		}
-		/* Assume that first answer is NULL/CNAME that we wanted */
+		/* Here type is still the question type */
 		readname(packet, packetlen, &data, name, sizeof(name));
 		CHECKLEN(10);
 		readshort(packet, &data, &type);
 		readshort(packet, &data, &class);
 		readlong(packet, &data, &ttl);
 		readshort(packet, &data, &rlen);
 		if (type == T_NULL) {
 			/* Assume that first answer is what we wanted */
 			readname(packet, packetlen, &data, name, sizeof(name));
 			CHECKLEN(10);
 			readshort(packet, &data, &type);
 			readshort(packet, &data, &class);
 			readlong(packet, &data, &ttl);
 			readshort(packet, &data, &rlen);
 			rv = MIN(rlen, sizeof(rdata));
 			rv = readdata(packet, &data, rdata, rv);
 			if (rv >= 2 && buf) {
@ -346,9 +481,15 @@ dns_decode(char *buf, size_t buflen, struct query *q, qr_t qr, char *packet, siz
 				rv = 0;
 			}
 		}
-		if ((type == T_CNAME || type == T_MX) && buf) {
+		else if ((type == T_A || type == T_CNAME) && buf) {
-			if (type == T_MX)
+			/* Assume that first answer is what we wanted */
-				data += 2;	/* skip preference */
+			readname(packet, packetlen, &data, name, sizeof(name));
 			CHECKLEN(10);
 			readshort(packet, &data, &type);
 			readshort(packet, &data, &class);
 			readlong(packet, &data, &ttl);
 			readshort(packet, &data, &rlen);
 			memset(name, 0, sizeof(name));
 			readname(packet, packetlen, &data, name, sizeof(name) - 1);
 			name[sizeof(name)-1] = '\0';
@ -356,7 +497,74 @@ dns_decode(char *buf, size_t buflen, struct query *q, qr_t qr, char *packet, siz
 			buf[buflen - 1] = '\0';
 			rv = strlen(buf);
 		}
-		if (type == T_TXT && buf) {
+		else if ((type == T_MX || type == T_SRV) && buf) {
 			/* We support 250 records, 250*(255+header) ~= 64kB.
 			   Only exact 10-multiples are accepted, and gaps in
 			   numbering are not jumped over (->truncated).
 			   Hopefully DNS servers won't mess around too much.
 			 */
 			char names[250][QUERY_NAME_SIZE];
 			char *rdatastart;
 			short pref;
 			int i;
 			int offset;
 			memset(names, 0, sizeof(names));
 			for (i=0; i < ancount; i++) {
 				readname(packet, packetlen, &data, name, sizeof(name));
 				CHECKLEN(12);
 				readshort(packet, &data, &type);
 				readshort(packet, &data, &class);
 				readlong(packet, &data, &ttl);
 				readshort(packet, &data, &rlen);
 				rdatastart = data;
 				readshort(packet, &data, &pref);
 				if (type == T_SRV) {
 					/* skip weight, port */
 					data += 4;
 					CHECKLEN(0);
 				}
 				if (pref % 10 == 0 && pref >= 10 &&
 				    pref < 2500) {
 					readname(packet, packetlen, &data,
 						 names[pref / 10 - 1],
 						 QUERY_NAME_SIZE - 1);
 					names[pref / 10 - 1][QUERY_NAME_SIZE-1] = '\0';
 				}
 				/* always trust rlen, not name encoding */ 
 				data = rdatastart + rlen;
 				CHECKLEN(0);
 			}
 			/* output is like Hname10.com\0Hname20.com\0\0 */
 			offset = 0;
 			i = 0;
 			while (names[i][0] != '\0') {
 				int l = MIN(strlen(names[i]), buflen-offset-2);
 				if (l <= 0)
 					break;
 				memcpy(buf + offset, names[i], l);
 				offset += l;
 				*(buf + offset) = '\0';
 				offset++;
 				i++;
 			}
 			*(buf + offset) = '\0';
 			rv = offset;
 		}
 		else if (type == T_TXT && buf) {
 			/* Assume that first answer is what we wanted */
 			readname(packet, packetlen, &data, name, sizeof(name));
 			CHECKLEN(10);
 			readshort(packet, &data, &type);
 			readshort(packet, &data, &class);
 			readlong(packet, &data, &ttl);
 			readshort(packet, &data, &rlen);
 			rv = readtxtbin(packet, &data, rlen, rdata, sizeof(rdata));
 			if (rv >= 1) {
 				rv = MIN(rv, buflen);
@ -365,6 +573,8 @@ dns_decode(char *buf, size_t buflen, struct query *q, qr_t qr, char *packet, siz
 				rv = 0;
 			}
 		}
 		/* Here type is the answer type (note A->CNAME) */
 		if (q != NULL)
 			q->type = type;
 		break;
--- a/src/dns.h
+++ b/src/dns.h
@ -24,8 +24,11 @@ typedef enum {
 	QR_ANSWER = 1
 } qr_t;
 extern int dnsc_use_edns0;
 int dns_encode(char *, size_t, struct query *, qr_t, char *, size_t);
 int dns_encode_ns_response(char *buf, size_t buflen, struct query *q, char *topdomain);
 int dns_encode_a_response(char *buf, size_t buflen, struct query *q);
 unsigned short dns_get_id(char *packet, size_t packetlen);
 int dns_decode(char *, size_t, struct query *, qr_t, char *, size_t);
--- a/src/encoding.c
+++ b/src/encoding.c
@ -21,13 +21,15 @@
 int
 build_hostname(char *buf, size_t buflen, 
 		const char *data, const size_t datalen, 
-		const char *topdomain, struct encoder *encoder)
+		const char *topdomain, struct encoder *encoder, int maxlen)
 {
 	int encsize;
 	size_t space;
 	char *b;
-	space = MIN(0xFF, buflen) - strlen(topdomain) - 7;
+	space = MIN(maxlen, buflen) - strlen(topdomain) - 8;
 	/* 8 = 5 max header length + 1 dot before topdomain + 2 safety */
 	if (!encoder->places_dots())
 		space -= (space / 57); /* space for dots */
--- a/src/encoding.h
+++ b/src/encoding.h
@ -17,6 +17,13 @@
 #ifndef _ENCODING_H_
 #define _ENCODING_H_
 /* All-0, all-1, 01010101, 10101010: each 4 times to make sure the pattern
   spreads across multiple encoded chars -> 16 bytes total.
   Followed by 32 bytes from my /dev/random; should be enough.
 */
 #define DOWNCODECCHECK1      "\000\000\000\000\377\377\377\377\125\125\125\125\252\252\252\252\201\143\310\322\307\174\262\027\137\117\316\311\111\055\122\041\141\251\161\040\045\263\006\163\346\330\104\060\171\120\127\277"
 #define DOWNCODECCHECK1_LEN  48
 struct encoder {
 	char name[8];
 	int (*encode) (char *, size_t *, const void *, size_t);
@ -27,7 +34,7 @@ struct encoder {
 	int (*blocksize_encoded)(void);
 };
-int build_hostname(char *, size_t, const char *, const size_t, const char *, struct encoder *);
+int build_hostname(char *, size_t, const char *, const size_t, const char *, struct encoder *, int);
 int unpack_data(char *, size_t, char *, size_t, struct encoder *);
 int inline_dotify(char *, size_t);
 int inline_undotify(char *, size_t);
--- a/src/iodine.c
+++ b/src/iodine.c
@ -61,7 +61,7 @@ usage() {
 	extern char *__progname;
 	fprintf(stderr, "Usage: %s [-v] [-h] [-f] [-r] [-u user] [-t chrootdir] [-d device] "
-			"[-P password] [-m maxfragsize] [-T type] [-O enc] [-L 0|1] [-I sec] "
+			"[-P password] [-m maxfragsize] [-M maxlen] [-T type] [-O enc] [-L 0|1] [-I sec] "
 			"[-z context] [-F pidfile] [nameserver] topdomain\n", __progname);
 	exit(2);
 }
@ -72,21 +72,25 @@ help() {
 	fprintf(stderr, "iodine IP over DNS tunneling client\n");
 	fprintf(stderr, "Usage: %s [-v] [-h] [-f] [-r] [-u user] [-t chrootdir] [-d device] "
-			"[-P password] [-m maxfragsize] [-T type] [-O enc] [-L 0|1] [-I sec] "
+			"[-P password] [-m maxfragsize] [-M maxlen] [-T type] [-O enc] [-L 0|1] [-I sec] "
 			"[-z context] [-F pidfile] [nameserver] topdomain\n", __progname);
 	fprintf(stderr, "Options to try if connection doesn't work:\n");
 	fprintf(stderr, "  -T force dns type: NULL, TXT, SRV, MX, CNAME, A (default: autodetect)\n");
 	fprintf(stderr, "  -O force downstream encoding for -T other than NULL: Base32, Base64, Base64u,\n");
 	fprintf(stderr, "     Base128, or (only for TXT:) Raw  (default: autodetect)\n");
 	fprintf(stderr, "  -I max interval between requests (default 4 sec) to prevent DNS timeouts\n");
 	fprintf(stderr, "  -L 1: use lazy mode for low-latency (default). 0: don't (implies -I1)\n");
 	fprintf(stderr, "  -m max size of downstream fragments (default: autodetect)\n");
 	fprintf(stderr, "  -M max size of upstream hostnames (~100-255, default: 255)\n");
 	fprintf(stderr, "  -r to skip raw UDP mode attempt\n");
 	fprintf(stderr, "  -P password used for authentication (max 32 chars will be used)\n");
 	fprintf(stderr, "Other options:\n");
 	fprintf(stderr, "  -v to print version info and exit\n");
 	fprintf(stderr, "  -h to print this help and exit\n");
 	fprintf(stderr, "  -f to keep running in foreground\n");
 	fprintf(stderr, "  -r to skip raw UDP mode attempt\n");
 	fprintf(stderr, "  -u name to drop privileges and run as user 'name'\n");
 	fprintf(stderr, "  -t dir to chroot to directory dir\n");
 	fprintf(stderr, "  -d device to set tunnel device name\n");
 	fprintf(stderr, "  -P password used for authentication (max 32 chars will be used)\n");
 	fprintf(stderr, "  -m maxfragsize, to limit size of downstream packets\n");
 	fprintf(stderr, "  -T dns type: NULL (default, fastest), TXT, CNAME, A (CNAME answer), MX\n");
 	fprintf(stderr, "  -O downstream encoding (!NULL): Base32(default), Base64, or Raw (only TXT)\n");
 	fprintf(stderr, "  -L 1: try lazy mode for low-latency (default). 0: don't (implies -I1)\n");
 	fprintf(stderr, "  -I max interval between requests (default 4 sec) to prevent server timeouts\n");
 	fprintf(stderr, "  -z context, to apply specified SELinux context after initialization\n");
 	fprintf(stderr, "  -F pidfile to write pid to a file\n");
 	fprintf(stderr, "nameserver is the IP number/hostname of the relaying nameserver. if absent, /etc/resolv.conf is used\n");
@ -131,6 +135,7 @@ main(int argc, char **argv)
 	int raw_mode;
 	int lazymode;
 	int selecttimeout;
 	int hostname_maxlen;
 	nameserv_addr = NULL;
 	topdomain = NULL;
@ -152,6 +157,7 @@ main(int argc, char **argv)
 	raw_mode = 1;
 	lazymode = 1;
 	selecttimeout = 4;
 	hostname_maxlen = 0xFF;
 #ifdef WINDOWS32
 	WSAStartup(req_version, &wsa_data);
@ -168,7 +174,7 @@ main(int argc, char **argv)
 		__progname++;
 #endif
-	while ((choice = getopt(argc, argv, "vfhru:t:d:P:m:F:T:O:L:I:")) != -1) {
+	while ((choice = getopt(argc, argv, "vfhru:t:d:P:m:M:F:T:O:L:I:")) != -1) {
 		switch(choice) {
 		case 'v':
 			version();
@ -203,6 +209,13 @@ main(int argc, char **argv)
 			autodetect_frag_size = 0;
 			max_downstream_frag_size = atoi(optarg);
 			break;
 		case 'M':
 			hostname_maxlen = atoi(optarg);
 			if (hostname_maxlen > 255)
 				hostname_maxlen = 255;
 			if (hostname_maxlen < 10)
 				hostname_maxlen = 10;
 			break;
 		case 'z':
 			context = optarg;
 			break;
@ -283,6 +296,7 @@ main(int argc, char **argv)
 	client_set_selecttimeout(selecttimeout);
 	client_set_lazymode(lazymode);
 	client_set_topdomain(topdomain);
 	client_set_hostname_maxlen(hostname_maxlen);
 	if (username != NULL) {
 #ifndef WINDOWS32
@ -315,17 +329,20 @@ main(int argc, char **argv)
 	signal(SIGINT, sighandler);
 	signal(SIGTERM, sighandler);
 	fprintf(stderr, "Sending DNS queries for %s to %s\n",
 		topdomain, nameserv_addr);
 	if (client_handshake(dns_fd, raw_mode, autodetect_frag_size, max_downstream_frag_size)) {
 		retval = 1;
 		goto cleanup2;
 	}
-	if (client_get_conn() == CONN_DNS_NULL) {
+	if (client_get_conn() == CONN_RAW_UDP) {
 		fprintf(stderr, "Sending queries for %s to %s\n", topdomain, nameserv_addr);
 	} else {
 		fprintf(stderr, "Sending raw traffic directly to %s\n", client_get_raw_addr());
 	}
 	fprintf(stderr, "Connection setup complete, transmitting data.\n");
 	if (foreground == 0) 
 		do_detach();
--- a/src/iodined.c
+++ b/src/iodined.c
--- a/src/user.h
+++ b/src/user.h
@ -24,7 +24,14 @@
   lead to massive dropping in multi-user situations with high traffic. */
 #define DNSCACHE_LEN 4
-/* Undefine to disable. MUST be less than 7; also see comments in iodined.c */
+/* Undefine to disable. Should be less than 18; also see comments in iodined.c */
 #define QMEMPING_LEN 30
 /* Max advisable: 64k/2 = 32000. Total mem usage: QMEMPING_LEN * USERS * 6 bytes */
 #define QMEMDATA_LEN 15
 /* Max advisable: 36/2 = 18. Total mem usage: QMEMDATA_LEN * USERS * 6 bytes */
 struct user {
 	char id;
@ -35,7 +42,6 @@ struct user {
 	in_addr_t tun_ip;
 	struct in_addr host;
 	struct query q;
 	struct query q_prev;
 	struct query q_sendrealsoon;
 	int q_sendrealsoon_new;
 	struct packet inpacket;
@ -48,6 +54,12 @@ struct user {
 	int fragsize;
 	enum connection conn;
 	int lazy;
 	unsigned char qmemping_cmc[QMEMPING_LEN * 4];
 	unsigned short qmemping_type[QMEMPING_LEN];
 	int qmemping_lastfilled;
 	unsigned char qmemdata_cmc[QMEMDATA_LEN * 4];
 	unsigned short qmemdata_type[QMEMDATA_LEN];
 	int qmemdata_lastfilled;
 #ifdef OUTPACKETQ_LEN
 	struct packet outpacketq[OUTPACKETQ_LEN];
 	int outpacketq_nexttouse;
--- a/src/version.h
+++ b/src/version.h
@ -19,7 +19,7 @@
 /* This is the version of the network protocol
   It is usually equal to the latest iodine version number */
-#define VERSION 0x00000501
+#define VERSION 0x00000502
 #endif /* _VERSION_H_ */