This fixes a bug that was introduced in Select2 4.0.0 and only
partially fixed in Select2 4.0.6-rc.0 where the `title` attribute
that is set on the selection container (or individual selections,
for a multiple select) is not cleared when the text/title of the
option is not set. In most cases, users no longer see this issue
because the `text` property of most data objects is set, so the
`title` attribute will always be cleared correctly. There was a bug
for cases where the `text` property was not set, or where the `text`
property was set to an empty string, that resulted in the `title`
attribute persisting with the incorrect value.
We have fixed this issue by always removing the `title` attribute
from the selection (or not adding it in the first place, for a
multiple select) when the `text` and `title` properties of the data
object are empty or not present.
This also adds in a series of tests to ensure the `title` attribute
is set properly in a variety of cases, building upon the ones that
already existed.
Fixes#3895
This fixes a bug where if you cloned a Select2, the internal ID used
for mapping elements (specifically the `<select>`) to the in-memory
data store would be cloned as well, causing issues when you tried to
initialize Select2 on the cloned element. This was because we did not
properly clear all of the internal data and all of the internal
attributes that Select2 uses when we destroyed it. The internal
`data-select2-id` attribute was not being cleared, and this was the
attribute being used for the internal mapping.
Now we properly clear the `data-select2-id` attribute from the element
when we call `RemoveData` on the element. This aligns with what we
were trying to do, since we previously cleared out the internal store
for that ID, and fixes the issue we were seeing when cloning.
Fixes#5247
In order to enable the ability to uniquely identify a result by an ID
in the DOM, we generate a new ID for the result based on a combination
of things, including the container ID prefix that is generated and
used elsewhere in Select2. This has worked fairly well for use cases
including attaching Select2 to an existing `<select>` and loading in
options from a remote data set.
Unfortunately, because this process relied on the container ID being
used as a prefix, this failed for options which were automatically
generated on initialization using the `data:` option to Select2.
These were not being generated with an ID because at the time that
they were being generated, the data adapter was not aware of the
container it was being used in. This broke some accessibility features
because we had a mix of options in the results list with IDs, and
some without, so we fixed the ordering to make this work.
Option generation no longer happens when the data adapter is first
initialized, which is where it was previously happening, and instead
it now occurs when the data adapter is bound to the container. This
allows us to ensure that the data adapter is always aware of the
container it is being associated with, so now it will be able to
generate the result IDs.
This also fixes the tests for the array adapter as well as the
legacy `<input />` adapter so they properly bind to a container
during the test. This was causing test failures becuase the options
which would previously be generated during initialization were no
longer appearing.
Fixes#4350
* Rewrote maximumSelectionLength tests to use container
These brings the tests in line with other tests which we have, and
makes it easier to understand what is actually going on in the tests.
This also removes a redundant set of tests where we were testing with
=> 2 options being allowed. There are no current edge cases that would
have required this.
* Fix maximumSelectionLength being ignored by closeOnSelect
There was a bug where the `maximumSelectionLength` option would not
kick in if the `closeOnSelect` option was enabled. Normally, this
was enabled by someone in their global configuration, but it could
also be seen when somoene selected an option while holding the
meta/ctrl/alt keys. This would implicitly enable the `closeOnSelect`
behaviour, even when it was not globally enabled, and cause the bug.
This fixes that issue by listening to the `select` event which is
triggered whenever an option is selected, and triggers the "maximum
selected" message based on that event. This should now force the
message to be displayed, even when the results did not have to be
queried another time.
Fixes#3514Fixes#3860Closes#5333
This fixes a long-standing bug where if you tried to click in the
search box for a multiple select while there was text in it, the
dropdown would close and the text would be cleared. This caused
many unexpected issues, because it meant that you could only use
your keyboard to edit text within the search box.
This will still clear out the search field if you click within the
area of the selection which is not the search field. I'm not sure
if that is also unexpected behaviour, so for now I am going to
maintain it.
Fixes#3517Fixes#3808Fixes#5491Closes#5551
This is needed to screen readers know that the Select2 is disabled
when focus is put on the selection container. Because we were
mirroring the disabled state to the search input on a multiple
select in the past, this is really only needed for single select
elements which would not otherwise has the disabled property.
This was identified in a previous accessibility audit as being
something which Select2 did not properly report because we were
not setting the attributes properly.
Fixes#4575
This behaviour, where the focus was happening on a small asynchronous
delay, was added in commit 933189b92 late last year in a commit with
no supporting tickets or commit message explaining what the change
was trying to accomplish. This commit has effectly been reverted within
this commit, since it caused a regression in how focus was being
assigned that made it inconsistent with a standard `<select>`.
A test was added for this which ensures that we won't see that
regression again.
Fixes#5532Fixes#5185Closes#5552
Ever since the 4.0.0 release of Select2, there has been a bug where
if you enabled infinite scrolling but did not return enough results
on the first load of AJAX to show a scrollbar, then infinite
scrolling would not be enabled and you could not view anything other
than the first page of results. The solution for this was first
proposed in #3888 but it was closed off because of inactivity and
missing tests.
This fixes the issue by performing the check to see if more results
should be loaded both on scroll and also when the results are first
loaded. This solves the issue that we were seeing before, because
the plugin knows it needs to load in more results, just it did not
receive the scroll event before and thus was not able to actually
load in the new results.
This has the potential to trigger multiple AJAX requests to load in
multiple pages of results if the user has the ability to see many
options, but only a few are being loaded at a time.
This also adds tests for infinite scrolling, both to ensure that
it will attempt to load additional pages, even without the scrollbar,
and to ensure that the regular behaviour of not loading additional
pages when the scrollbar is visible is preserved.
Fixes#3088
This check is in place in most other places, mostly because we have
run into widespread issues under similar circumstances and we like to
avoid those, but it was forgotten here. There also were no tests
covering this, so it was never caught.
This adds tests that ensure that the option in the results list will
be generated with the correct "disabled" state based on whether or
not it, or a parent element, is marked as disabled.
This should have been easy: just check `element.disabled`
Unfortunately the `disabled` property is not inherited within the
option chain, so if an `<optgroup>` is disabled, the `<option>`
elements or other `<optgroup>` elements held within it do not have
their `disabled` property set to `true`. As a result, we needed to
use the `matches` method to check if the `:disabled` state is
present for the element. The `matches` method is part of the official
standard, but it was not implemented under that name for a while and
as a result Internet Explorer only supports it under the prefixed
`msMatchesSelector` method and older versions of Webkit have it
implemented as `webkitMatchesSelector`. But once we use this method,
it appears to consistently return the expected results.
This `matches` method and prefixed predecessors are not supported in
IE 8, but they are supported in IE 9 and any browsers newer than
that. Instead of buulding a very hacky solution using
`querySelectorAll` that was brittle, I have chosen to act like
everyone else and pretend IE 8 no longer exists.
Fixes#3347Closes#4818
This allows for more accurate resolution of the width when compared
to the `resolve` method. This is more relevant for jQuery 1.x, where
the `resolve` method cannot find the width of a hidden select box,
but it also applies to newer versions of jQuery where the `width()`
method provided by jQuery doesn't fully match `getComputedStyle()`.
Fixes#3278Fixes#5502Closes#5259
* Add test for losing focus when searching tag entries
* Revert unknown unit test fix
Removing this no longer breaks a unit test, and having it in here
results in the select box receiving focus unexpectedly. It's not
clear what problem this was solving, since it was manually applied
from a series of pull requests.
It claims to be fixing an issue that was specific to IE11, and I'm
willing to re-introduce that bug because there doesn't appear to be
a regression test for it, and it's breaking some critical use cases.
The goal should be to focus the search box if it would have normally
lost focus when the selection was updated.
Fixes#5485Fixes#5516Closes#5550
* Update tests to be compatible with jQuery 3.0.0
There was a change in jQuery 3 that ensures that the return value of `.val()` on a multiple select is always an array. This is a breaking change from previous versions, where `null` or `undefined` were returned in these scenarios. Because we cannot `assert.equal` on a list of possible values, these assertions were switched to `assert.ok` which should be good enough.
* Properly strip out units in positioning tests
Before we were assuming that there were no units, and only were we stripping them out if we were expecting 3 digits. Now we just strip out all non-digit characters, so that should do the job and get us what we want.
There was a change in jQuery 3.2.0 that caused the units to be returned in these specific calls. They were not previously being returned, so this was not actually an issue.
* Add automated testing against jQuery 3.4.1
No tests appear to be currently failing.
We needed to define the `qunit` module in the unit tests because there was a change in grunt-contrib-qunit 0.6.0 that breaks when you define an AMD loader. It expects that the AMD loader is also used to load QUnit, instead of just being used to support the tests, so if you don't define the qunit module it will just hang and do nothing. Luckily we have the helpers file to help us out here, since it allows us to globally define this module.
* Update dev dependencies
* Adjust dependencies versions to avoid unmet peer dependency error
* Update Travis CI node version to 8
* Recompile dist
This updates all of the minified files to use the latest uglifyjs version, which results in better compression (by a small margin).
* Remove SauceLabs credentials
SauceLabs is no longer used during builds, so we no longer need to include these encrypted credentials.
* Clean up badges
* Remove SauceLabs from the README
* Misc README fixes
* Disable Travis email notifications
Looks like we accidentally re-enabled these when removing IRC.
* Added deployments to NPM on tagged releases
Previously this was being done manually after each release, which resulted in a few releases not showing up on NPM for a significant amount of time. Now the builds should be automatically pushed, which should hopefully improve a lot of the issues we were seeing.
* Drop IRC notifications
We no longer use this IRC channel.
* Clean up .travis.yml
* Remove grunt ci
This is no longer needed now that we don't do anything special for CI builds. This also allows us to minify during CI builds, which will be useful for the tagged builds which depend on these minified files being up to date (so they can get released as well).
These two are required at build time to generate the full builds
of Select2 (for jQuery Mousewheel) and to inject the AMD loader
(for Almond.js). They are not required for anyone who depends on
Select2, since jQuery Mousewheel is an optional dependency.
This may result in some people needing to add jQuery Mousewheel to
their projects as a required dependency, if they were expecting
it to be added by Select2 before.
* select2.jquery.json - This was previously used by the jQuery Plugin
Registry which was shut down and put into read-only mode a few
years ago. Since nobody else appears to use this file, it doesn't
make sense for us to keep bumping the version in it and keeping it
up to date.
* vendor/ - This was needed back when the full version of Select2
actually bundled its own version of jQuery. Since we never actually
did this, we no longer need to keep the copy of jQuery around.
* Start running tests against jQuery 2.x
We were only running tests against jQuery 1.x before and they were
all passing. This was a problem because apparently all of the data-*
attribute tests fail in jQuery 2.x. We are now running both the
integration and unit tests against both jQuery 1.x and jQuery 2.x.
Right now this resulted in a complete duplication of the test files
because there wasn't an obvious way to run the tests against both
versions. We're going to look into removing this duplication in the
future once the current issues are fixed.
We are also going to look into testing against jQuery 3.x in the
future, since that is also a supported line of jQuery.
* Force the data-* attributes to be parsed
There was a change made that switched us from using `$.data` and
`$.fn.data` internally to using an internal data store (managed
through internal utilities). This had the unfortunate side effect
of breaking the automatic loading of data-* options in versions of
jQuery other than 1.x, which included anything that would be
considered modern jQuery. While the change was made and approved
in good faith, all of the tests passed and the docs pages appeared
to be working, the tests really failed when running on newer versions
of jQuery. This was confirmed when we started running automated tests
against both versions, which confirmed the bug that others have been
seeing for a while.
The change was made becuase calling `$.fn.data` on an element which
contains a reference to itself in the internal jQuery data cache
would cause a stack overflow. This bug was well documented at the
following GitHub ticket and was resolved by no longer using
`$.fn.data`: https://github.com/select2/select2/issues/4014
Unfortunately because `$.fn.data` was no longer being called in a
way such that all of the data attributes would be dumped out, we
needed to find a replacement. The substitute that was given in the
original bug fix worked when the data cache was fully primed, but
we never primed it anywhere so it actually failed in the general
case. That meant we needed to find a way to manually prime it,
which is exactly what this change does.
* Clean up select2/utils
